BLUETTI PV120S Solar Panel User Guide
- June 16, 2024
- Bluetti
Table of Contents
BLUETTI PV120S Solar Panel
Product Information
Specifications
- Maximum Power(Pm): 120W
- Open circuit voltage: 24.8V
- Short circuit current: 6.1A
- Cell efficiency: 23.4%
- Cell lamination: ETFE
- Cell type: BLUETTI
- Operating temperature: 14-149°F / -10-65°C
- Weight: 14.9Ibs / 6.8Kg
- Dimensions (Unfolded): 68.821.7in / 1749552mm
- Dimensions (Folded): 18.121.7in / 461552mm
- Warranty: 12 Months
Frequently Asked Questions
- Are the foldable solar modules waterproof?
- Yes, the product meets IP67 waterproof standards, which maximizes the lifespan of the module. However, it should not be submerged in water.
- What will affect the final conversion efficiency of solar panels?
- The actual solar panel efficiency may be affected by several factors, including weather conditions, sun intensity, shading, panel orientation, temperature, location, dust, and dirt. For example, if you live in a place with limited sunlight or your panels are covered by shade, you may experience very low output or no output at all.
- Is BLUETTI’s solar panel compatible with third-party power stations?
- Yes, BLUETTI’s solar panels are compatible with third-party power stations as long as the voltage of the solar panel is compatible with the power station’s voltage limit, and the connectors are the same. For compatibility with other power stations, please contact us for further assistance.
What is in the box
How to use
Unfold
Adjust the kickstand
How to use the kickstand
- Open the kickstand, adjust the angle, stabilize the panel, fold the kickstand.
Connect to power station
Note
- Use ONLY ONE PV120S solar panel with EB3A,EB55.
- Whether connected in series or parallel, make sure the total voltage of solar panels is under the power station’s input voltage limit.
Attention
- Regular inspection and maintenance are required to prolong the lifespan of solar panels.
Warning
- Do not use solar panels in extreme weather conditions like thunderstorms, floods, typhoons, etc.
- Always use solar panels within the specified temperature range (14-149°F/-10-65°C).
Technical details
PV120S
Maximum Power(Pm)| 120W
Open circuit voltage| 24.8V
Short circuit current| 6.1A
Cell efficiency| Up to 23.4%
Cell lamination| ETFE
Cell type| Monocrystalline silicon
Operating temperature| 14-149°F/-10-65°C
General
Weight| 14.9Ibs / 6.8Kg
Dimensions| Unfolded| 68.821.7in / 1749552mm
Folded| 18.121.7in / 461*552mm
Warranty
12 Months
* STC: Irradiation 1000W/m2, cell temperature 25°C, atmospheric mass number AM 1.5, measurement tolerance ±3 % (Pm).
Frequently asked questions
Are the foldable solar modules waterproof?
- Yes, the product meet IP67 water proof, which maximize the lifespan of the module, it should not get wet.
What will affect the final conversion efficiency of solar panels ?
- The actual solar panel efficiency may be affected by several factors, like weather, sun intensity, shading, panel orientation, temperature, location, dust and dirt.
- For example, if you live in a place without much sunlight or your panels are covered by shade, you’ll get a very low output or none at all.
Is the BLUETTI’ s solar panel compatible with the third party’ s power station ?
- Yes. Make sure BLUETTI solar panels’ voltage is compatible with your power stations’ voltage limit, while you’re using the same connector. Please feel free to contact us for compatibility with other power stations.
Contact Us
References
- Homepage | Power Integrations
- BLUETTI(ブルーティ)公式サイト-ポータブル電源
- BLUETTI: Portable Power Station, Solar Generator Kit
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>