CORRY 15839H Hanging Light Instruction Manual
- June 16, 2024
- CORRY
Table of Contents
CORRY 15839H Hanging Light
Specifications
| Feature | Specification |
|---|---|
| Bulb Type | LED |
| Maximum Wattage | 9W |
| Socket Type | E27 |
| Input Voltage | 230V~ 50Hz |
| Manufacturer | GLOBO Handels GmbH |
| Address | Gewerbestrasse 3, A-9184 Sankt Peter, Austria |
INSTALLATION
Diagram and installation instructions for GLOBO LIGHTING, product model 15839H, which can be found at www.globo-lighting.com.
Assembly Diagram
The assembly diagram shows the various components required for installation, including the electrical connections within the ceiling rose (details A and B), the lamp structure (details 1 through 6), and the wiring detail (detail 4 in the circular inset). Detail C shows the ON/OFF switch for electrical connections, emphasizing the necessity to ensure the power is off during installation.
Important note: The diagram indicates that only LED bulbs should be used
with this product. A representation of an excluded traditional bulb is also
shown with the label “excl.”
Component Identification
- (1) Ceiling rose cover
- (2) Screws for securing the ceiling bracket
- (3) Ceiling bracket
- (4) Wiring connections within the ceiling rose (N, E, L)
- (5) Cable and lamp holder
- (6) Detailed view of the electrical connections
- (7) Lampshade
- (8) Main body of the lamp with cascading decorations
- (a) Indicates matching parts for assembly
- (9) LED bulb to be used
HOW MANY WATTS
1 x MAX 9W LED E27 230V- 50Hz
GLOBO Handels GmbH Gewerbestrasse 3 A-9184 Sankt Peter Austria www.globo- lighting.com
FAQ’s
Where can I find more information about the product?
Additional information can be found on the manufacturer’s website at www
.globo-lighting.com.
What type of bulb should be used with this lamp?
Only LED bulbs should be used, specifically a maximum of 9W and an E27 socket type.
Can I use a traditional incandescent bulb with this lamp?
No, traditional incandescent bulbs are not suitable for this lamp and should not be used. The diagram clearly marks these as excluded.
What should I check before starting the installation?
Ensure that the power is turned off at the mains to prevent any electrical hazard. This is indicated in detail C of the diagram with an ON/OFF switch graphic.
How do I know which part of the lamp is which in the diagram?
The diagram includes numbered and lettered details that correspond to the different parts of the lamp for easy identification during assembly.