Swiss Madison SM-BV369WN-C Rennes Freestanding Vanity Instructions
- June 16, 2024
- Swiss Madison
Table of Contents
Swiss Madison SM-BV369WN-C Rennes Freestanding Vanity
Specifications
- Model: SM-BV369WN-C
- Type: Freestanding Vanity
- Design: Sleek, freestanding
- Colours & Finishes:
- Walnut: SM-BV369WN-C
- Natural Teak: SM-BV369TK-C
- Weight: 61 lb (Net Weight)
- Dimensions: D: 17 11/16 x W: 23 1/4 x H: 32
Included Parts
- Vanity Cabinet: SM-BV369WN-C
Required Parts (sold separately)
- Vanity Top
- Sink Drain
- Drain Trap
- Faucet
- Water Supply Lines
- Sold by Swiss Madison
Installation
To install the Rennes Freestanding Vanity SM-BV369WN-C, follow these steps:
- Select a suitable location for the vanity in your bathroom.
- Freestanding
- Ensure that the floor is level and stable.
- Place the vanity cabinet in the desired position and adjust it until it is level.
- If necessary, secure the vanity cabinet to the wall or floor using appropriate hardware.
- Connect the required parts (sold separately) such as the vanity top, sink drain, drain trap, faucet, and water supply lines following the manufacturer’s instructions.
- Double-check all connections for leaks and make any necessary adjustments.
- Your Rennes Freestanding Vanity SM-BV369WN-C is now ready to use.
Features
- Sleek, freestanding design
Colours & Finishes
- Walnut: SM-BV369WN-C
- Natural Teak: SM-BV369TK-C
Cleaning and Maintenance
To keep your Rennes Freestanding Vanity SM-BV369WN-C in good condition, follow these guidelines:
- Regularly clean the vanity surface using a mild, non-abrasive cleaner and a soft cloth.
- Avoid using harsh chemicals or abrasive materials that may damage the finish.
- Wipe off any spills or splashes immediately to prevent staining.
- Periodically check and tighten any loose connections.
Troubleshooting
If you encounter any issues with your Rennes Freestanding Vanity SM-BV369WN-C, refer to the following troubleshooting steps:
-
Issue:
Leaking faucet. -
Solution:
Check if the faucet is properly installed and all connections are tight. If necessary, replace any faulty parts or consult a professional plumber. -
Issue:
Uneven or unstable vanity. -
Solution:
Ensure that the floor is level and stable. Adjust the vanity’s position and secure it to the wall or floor using appropriate hardware if needed. -
Issue:
Stains or discolouration on the vanity surface. -
Solution:
Clean the surface using a mild, non-abrasive cleaner and a soft cloth. If the stains persist, consult the manufacturer for further assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>