foxydry C38DE8 Smooth Active Ironing Board Instruction Manual

foxydry C38DE8 Smooth Active Ironing Board

Before using this appliance, please read this instruction manual and keep it for future reference.

IMPORTANT SAFE

Dear Customer,
We are delighted that you have purchased the Euroflex Smooth Active Ironing Board. Through proper assembly, use and maintenance the board will provide excellent ironing results for a long time. Before using this ironing system for the first time, please read carefully through the instructions in this manual and store them for future reference.

These instructions are to accompany the appliance when it is used by another person who is unfamiliar with its operation or when ownership is transferred to another person. The manufacturer, importer and distributor assume no liability if the information in these instructions has not been strictly followed.

SAFETY WARNINGS

• If the electrical cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person to avoid hazards.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children must not play with the appliance.
• Cleaning and user maintenance shall not be carried out by children without supervision.

IMPORTANT NOTICES

• ARNING! If neither of the suction or blowing functions is active, use the iron in dry-ironing mode (without steam) to avoid condensation inside the board.
• This appliance complies with European Directives regarding “electromagnetic compatibility” and “Electrical product safety”. The appliance carries CE marking.
• Repairs should be carried out solely by personnel authorized by the manufacturer.
• Equipment repaired by personnel who are not authorized to do so represents a risk and, as such, is not covered by the warranty.
• The manufacturer reserves the right to make changes to the design and features of the appliance without notice.
• This appliance is solely for household domestic use.
• This appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
• Do not connect the appliance before making sure that the electrical voltage supply corresponds to the required voltage shown on the product.
• The electric socket should be earthed and equipped with a 16A automatic circuit breaker.
• The auxiliary power outlet should be used only with ironing systems with consumption max indicated on the socket.
• Do not connect the appliance to the electricity power supply with an unsuitable multi-socket or an unsuitable extension lead.
• These do not guarantee the required safety of the appliance (e.g. danger of overheating).
• The manufacturer, importer or distributor assumes no responsibility for damage to property or injury to persons if this appliance is damaged as a result of improper use or assembly; unauthorized repairs carried out or unauthorized spare parts have been used; and for not properly following the care and maintenance instructions found in this manual.
• Do not expose the appliance to water, dampness or heat. Only use indoors, not intended for outdoor use.
• Use a dry or slightly damp cloth to clean this appliance.
• Use solely manufacturer-recommended accessories or spare parts.
• Do not iron without the ironing board cover. The ironing board reaches potentially high temperatures, do not touch it under any circumstances. High temperatures may potentially scald.
• Keep the appliance in a safe dry place (not outdoors) and out of the reach of children when not in use.
• Do not pull on the electrical cable. Do not use the cable to move the appliance.
• Do not exert undue pressure on the cable (i.e. when closing a door). Avoid any contact with sharp edges and corners. Keep the cable away from hot surfaces.
• No parts that are to an electrical power supply (switch, plug, electronic components, etc) should come in contact with water.
• Disconnect the appliance from the power supply before any maintenance or cleaning operations. Always allow the appliance to completely cool down.
• Remove the power supply in the event the appliance remains unattended for a long.
• Do not overturn or lean the appliance unduly to one side.
• Do not insert any object in the various openings and do not use the appliance if any opening is obstructed.
• Do not use the appliance with wet hands or bare feet.
• Do not use the appliance when close to flammable or explosive substances.

ADVICE ON DISPOSAL

1. When this crossed-out bin symbol appears on a product it means that the product is covered by European Directive 2002/96/EC
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via specific collection facilities designated by the government or the local authorities.
3. Proper disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about the disposal of your old appliance, please contact your municipality, the waste disposal service or the shop where you purchased the product.

INDICATIONS OF USE
This manual can not take into account every possible use. For further information or for any problems that are not covered in detail in this manual, please contact the Service Center or retailer. Keep this manual in a safe place for future reference. Destroy all plastic bags and packaging material, they can be a risk for children!
NOTE: Keep the packaging for possible future transport (eg relocations, repairs, etc.)
Attention: the photographs and/or drawings in this document are for illustrative purposes only. Actual appliances and accessories may vary due to product enhancement.

Safety Information in Digital Format
www.emmepi.tv/warning

Product Overview

1. Auxiliary power supply socket
2. Max 2300W
3. Iron storage shelf
4. Power ON-OFF button
5. Power indicator light
6. Control Panel
7. Function switch: suction position
8. Function switch: blowing position
9. Iron rest pad
10. Board height adjustment lever
11. Power supply cable
12. Iron Cord Support

BEFORE USE
Before starting the appliance for the first time, always remember that improper use, assembly or maintenance can be hazardous. Please, carefully read the instructions on pages 2,3,4,5.

ELECTRICAL CONNECTION (UK ONLY)
For your safety please read the following information.

Warning!
This appliance must be earthed. The appliance must be connected to a 220-240 volts 50-cycle AC supply using a three-pin socket, suitably earthed and should be protected by a 13 amp fuse in the plug. The appliance is supplied with a rewireable 13 amp 3-pin plug fitted with a 13 amp fuse. Should the fuse require replacement, it must be replaced with a fuse rated at 13 amp and approved to BS1362. If the main plug is unsuitable for the socket outlet in your home or is removed for any other reason, then the cut-off plug should be disposed of safely to prevent the hazard of electric shock. There is a danger of electric shock if the cut-off plug is inserted into any 13 amp socket outlet.

Important
The wires in the mains lead on this appliance are coloured per the following code:

• Green and Yellow – Earth
• Blue – Neutral
• Brown – Live

The green and yellow wire must be connected to the terminal in the plug which is marked with the letter E or with the earth symbol. The blue wire must be connected to the terminal marked N. The brown wire must be connected to the terminal marked L.

PREPARE YOUR IRONING BOARD POSITIONING
When setting up the ironing board please note the following:

• Place the ironing board on a flat, even, dry surface, near an earthed power socket
• Position the ironing board securely so that nobody can knock it over or get hurt.
• Never put the appliance on or near warm surfaces or near flames
• Use the appliance indoors only.
• To avoid scalding, keep the appliance away from children.
• Use only the correct extension cables according to the advice given on pages 2,3,4,5; pay attention not to trip over the cord.

Put up the ironing board as follows

• Place the ironing board upright on the floor (folded shelf end downward).
• Hold the end of the ironing board with one hand.
• With the other hand hold the upper part of the ironing board legs.
• Firmly pull the ironing board wide apart (1.) until the adjustment height device locks in place (2.).
• Place the ironing board in a horizontal position (3.).
• Unfold the shelf as shown here.

Note
Be careful that the feet of the ironing board don’t slip on smooth floors while opening/closing the ironing board. Insert the iron cord support in one of the small holes on each side of the ironing board and hang the iron steam cord. The iron cord support keeps the iron cord away from the surface of the board while ironing to avoid the cord moving or dragging the garment. The iron cord support also prevents “wear and tear” of the iron cord due to rubbing against the edges or surface of the board.

Before Use

IRONING BOARD START-UP

• Plug the power supply cord from your iron/steam generator into the auxiliary socket built-in to the ironing board.
• Plug the power supply cord from your ironing board into a 13amp wall socket and switch the socket on.
• Switch the appliance on using the power on/off switch (3). The power on/off switch activates the ironing board and the generator or steam iron plugged into the auxiliary socket.

Starting the Appliance

SUCTION/BLOWING FUNCTION AND HEATING OF THE BOARD
The suction absorbs the excess steam, which is no longer used after the ironing process. The suction helps hold the garment on the ironing surface and helps to dry the garment. Garments ironed with this board are ready to be placed straight in the wardrobe without further airing. The heated ironing surface stays dry and keeps the steam hot so that it passes through the board to be expelled without condensing.

WARNING!
If the ‘SELECTOR SWITCH‘ is in the “0” position (none of the two functions between suction and blowing is active), use your iron in dry-ironing mode (without steam), to avoid the condensation inside the board.

SUCTION FUNCTION

• With the suction function, light fabrics (silk etc.) can be held in place on the ironing board, preventing them from slipping.
• The suction function cools and sets the fabric during ironing, guaranteeing no wrinkles.
• For the suction function set the selector switch on position “I” (4).
• With the switch in position “0”, the suction function is switched off. Starting the Appliance

BLOWING FUNCTION
The blowing function allows you to iron on a pillow of air without applying downward pressure. This makes ironing of delicate items, or difficult areas (trousers folds, pockets, seams, difficult areas to reach), much easier and avoids the visible signs or seam crushing. For the blowing function set the selector switch on position “II” (5). With the switch in position “0”, the blowing function is switched off.

AFTER IRONING

• After use, leave the board open for 10 minutes to dry the cover and to avoid the formation of condensation in the board.
• Turn off the ironing board using the power on/off switch. (1)
• Remove the plug from the socket (9).
• Let the equipment cool completely.
• Remove the iron cord support.
• Place the iron on the iron rest pad.
• Unplug the iron/steam generator from the auxiliary socket and remove it from the board.
• Fold the shelf back over the ironing surface.
• Wrap the power supply cord around two cord supports beneath the board.
• Hold the board leg with your foot to stop it skidding.
• Operate the height adjustment lever and close the board.

Note: do not entangle the power cord. Store the closed board in a vertical position with the folded shelf end towards the floor. Always ensure that the board does not skid and tilt. Store the appliance in a dry place and out of reach of the children.

MAINTENANCE

Changing the Cover
With continuous use, the cover which is fitted with a drawstring is subject to wear and should be replaced regularly. Due to the design of this ironing system which incorporates a heated ironing surface and to guarantee the correct performance of the product, we recommend that you use only Euroflex ironing board covers. Metalized heat reflective covers and covers with thick lining are not suitable for this ironing system and may cause overheating of the suction motor.

Warning! In case of failure due to faulty material or if damage results due to the appliance falling over or being dropped, immediately remove the plug from the socket. Repairs should be performed exclusively by an authorized Service Centre. Repairs performed by unauthorized personnel may cause serious hazards for users. No responsibility or liability is assumed for injury to persons or damage to property caused by repairs performed by unauthorized personnel or where parts have been used that are not approved by the manufacturer. In such cases, the manufacturer’s warranty is voided.

Cometa Srl
Via G. Schiratti, 49
31053 Pieve di Soligo, TV
P.iva: 03845300262
+39 0438 971412
info@foxydry.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>