Plasma CUT50D Cutter 50 Amp 1 2 Clean Cut 110V-220V User Guide
- June 16, 2024
- PLASMA
Table of Contents
Plasma CUT50D Cutter 50 Amp 1 2 Clean Cut 110V-220V
Facing the E04 Code with Ease
Why do machines have low-temperature protection?
In order to extend the life of the machine and to maintain its powerful
cutting performance.
Why don’t other brands have this?
Because we want you to get the best value for your money with the lowest
spend, and we care and value the longevity of our machines.
We are constantly innovating and upgrading.
What happens when low temperature protection occurs
- In a low temperature working environment
- Press the torch gun switch.
- Digital display is E04
How to cancel the low-temperature protection ?
Step 1, Open the cover, at mark ①, loosen the screws with a screwdriver, remove the small board connecting wires, and move the small board out of position.
Step 2 , loosen the screws at mark ② and remove the wire fasteners.
Step 3, Remove the cable at mark ③
Then there are only two steps :
- Replace the new cable (Feel free to contact us to send it to you)
- Restore the machine, ready to work.
Any questions, please feel free to contact us.
Thanks again for choosing us!