PLASMA C600 Air Cleaner Instructions
- June 13, 2024
- PLASMA
Table of Contents
PLASMA C600 Air Cleaner Instructions
PLASMA CILINDRICO
C600
C1000
210 – 250 VAC 50Hz, 10W
Install hood as required based on the selected model. Slide an O-ring over the
motor outlet. If necessary, use the eccentric adapter to move the filter away
from the wall or avoid obstacles, slide the second O-ring over the top of the
adapter.
Attach filter to adapter or motor outlet with assembled O-ring. Connect the
hood and filter to two separate sockets. Place the decorative tubes or the
recess in the case of built-in hoods. In wall and island hoods, apart from
making sure that the upper tubes have a corresponding air grille, it is
advisable to leave a small space between the ceiling and the tube to
facilitate correct air circulation.
| A | B |
|---|---|
| Filtro | Tubo decorativo |
| Filtre | Cheminée décorative |
| Filter | Chimney |
| Filtri | Camino decorativo |
| Filtro | Tubo decorativo |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>