himaly Digital Kitchen Scale Instruction Manual
- June 16, 2024
- himaly
Table of Contents
himaly Digital Kitchen Scale
FEATURES
- Indicate volume of water and milk
- Two weight unit systems g, lb:oz convertible
- Two volume unit systems ml, fl’oz convertible
- Low battery power I Overload indication
- With high precision strain gauge sensor
- With zero, tare function
- Auto-off
TO INSTALL OR REPLACE BATTERY
The battery type of scale depends on the product structure. Find the battery type of your scale according to the following pictures, then install and replace battery as described.
- 1x3V CR2032 lithium battery ( included) . Remove isolation sheet before use;
Open the battery case cover at the bottom of scale:
- A. Take out the used battery with the aid of a sharp object, as shown in picture.
- B. Install new battery by putting one side of the battery beneath the battery baffle and then pressing down the other side.
LCD
BUTTON FUNCTION
- MODE: Mode conversion
- ZERO: Zero\Tare
- UN IT: Convert unit systems of Metric or Imperial.
(Conversion button at the bottom of scale)
MODE CONVERSION
After turning on scale, press MODE button to select mode as shown below:
Remark: The unit system of scale depends on sales destination or the requirement of distributor.
TO CONVERT WEIGHT UNIT
If the scale with both unit systems of metric (g,ml ) or Imperial (l
b:oz,fl’oz) press MODE bottom to choose working mode ( weight,milk
volume,water volume)then press UNIT conversion button to convert between two
systems. Take the conversion of weight unit for example:
- When setting g as weight unit, the default volume unit is ml;
- When setting lb:oz as weight unit ,the default volume unit is fl’oz.
Remark: The unit system of scale depends on scale destination or the requirement of distributor
TO START WEIGHING
Weighing mode
- A. Place the scale on a solid and flat surface.
- B. Place bowl (if used) on the scale.
- C. Gently press on the scale by hand to turn on
- D. Wait until LCD shows “O”.Press MODE button to convert to weighing mode.
- E. Load weighing object on scale (or bowl) to start weighing. LCD will show the weight reading.
- F. If the weighing object is water or milk, press MODE button to choose volume mode and view the volume of weighing object.
Volume indication mode.
- A. Place the scale on a solid and flat surface.
- B. Gently press on the scale by hand to turn on
- C. Wait until LCD shows “O”, and press MODE button to choose “Water” or “Milk” mode.
- D. Put a liquid container onto the scale platform. LCD shows weight of container.
- E. Press ZERO button to zero or tare weight.
- F. Pour liquid (water or milk) into the container, LCD shows the volume ofihe liquid.
- G. Press MODE button to choose “Weight” mode and view the weight of liquid.
“‘ZERO”” OR “‘TARE”” FUNCTION
To weigh different loads consecutively without removing loads from the scale. Put first Load on the scale, get weight reading. Press ZERO button to reset the LCD reading to “0” before adding next load. You can repeat this operation.
Condition 1: “ZERO” function
When total sum of all loads on scale.;;4% of scale’s max.weight capacity.
4%=200g when capatity is 5000g
400g when capatity is 10000g
LCD will show —– or 0g each time ZERO is perssed. —– means not stable, please
wait for a moment. 0g and meanwhile an icon o on the left side of LCD mean
ZERO function is activated. Max.weight capacity remains unchanged.
Condition 2: “TARE” function
When total sum of all loads on scale> 4% of scale’s max.weight capacity.
(4%:80g when capacity is 2000g;
200g when capacity is 5000g)
LCD will show —– or 0g each time ZERO is pressed. —– means not stable, please wait for a moment. 0g and meanwhile an icon T on upper left corner of LCD mean TARE function is activated. Max. Weight capacity is reduced by total weight of all loads.
Under this condition:
By pressing ZERO, you can see the total weight of all loads on the scale. If you want to weigh more loads, just press ZERO to reset LCD reading to ‘0’ again.
AUTO SHUT OFF
Auto shut-off occurs if display shows ‘0’ or shows the same weight reading for 2 minutes.
WARNING INDICATORS
- Replace new battery.
- Scale overload. Remove item to avoid damage.Max.weight capacity is indicated on the scale.
CLEANING AND CARE
- Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use chemical/abrasive cleaning agents.
- All plastic parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavored/colored foods. Avoid contact with acids citrus juices.
- Always use the scale on a hard, flat surface. DO NOT use on carpet.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>