PHILIPS W5W-LED Ultinon Pro Car Signaling Bulb Instruction Manual
- June 16, 2024
- Philips
Table of Contents
PHILIPS W5W-LED Ultinon Pro Car Signaling Bulb
Ultinon Pro W5W-LED
Specifications
- Product Name: Ultinon Pro W5W-LED
- Type: Front Position lamp
- Compatibility: Car model #1, Car model #2
- CANbus Type: xyz
- Website: www.philips.com/roadlegalLED
Product Usage Instructions
Section 1: Removing the existing bulb and inserting the W5W-LED
- Pull out the W5W holder (including filament bulb) from the headlamp housing.
- Locate the W5W holder in the headlamp housing (1a).
- Press the holder (locking) while pulling it out (1b).
- Remove the W5W filament bulb from the holder.
- Insert the W5W-LED into the holder.
- Check the light function of the W5W-LED. If it does not light up, refit the W5W-LED the other way around.
- Confirm the functioning of the W5W-LED.
- Mount the holder together with the inserted W5W-LED into the headlamp housing (up to the final position).
Section 2: Turning out/in the W5W holder and inserting the W5W-LED
- Turn the W5W holder and extract it (including filament bulb) from the headlamp housing.
- Remove the W5W filament bulb from the holder.
- Insert the W5W-LED into the holder.
- Check the light function of the W5W-LED. If it does not light up, refit the W5W-LED the other way around.
- Confirm the functioning of the W5W-LED.
- Mount the holder together with the inserted W5W-LED into the headlamp housing (turn to the final position).
FAQ
Q: What is the compatibility of Ultinon Pro W5W-LED?
A: Ultinon Pro W5W-LED is compatible with Car model #1 and Car model #2.
Please check your car installation manual for further instructions.
Q: Where can I find more information about Ultinon Pro W5W-LED?
A: You can visit our website at
www.philips.com/roadlegalLED for more
information about Ultinon Pro W5W-LED.
Q: Do I need to change the lamps in pairs?
A: Yes, please change lamps in pairs for optimal performance.
Warning!
Don’t put any force at the bulb!
Please check car installation manual and follow instructions for lamp replacement.
INSTRUCTION
W5W-LED
Option
Pull and push
Pull out the W5W holder (including flament bulb) from the headlamp housing (1a). Press holder (locking) during pull-out (1b). Remove W5W flament bulb from the holder. Insert W5W-LED into the holder. Check light function of W5W- LED. In case the W5W-LED does not light up then please ret the W5W-LED the other way around. Confirm the functioning of W5W-LED. Mount holder together with inserted W5W-LED into the headlamp housing (up to the final position).
Turn out/in
Turn W5W holder and extract it (including flament bulb) from the headlamp housing. Remove W5W lament bulb from the holder. Insert W5W-LED into the holder. Check light function of W5W-LED. In case the W5W-LED does not light up then please refit the W5W-LED the other way around. Confirm functioning of W5W-LED. Mount holder together with inserted W5W-LED into the headlamp housing (turn to the final position)
W5W-LED CANbus
Please check if an accessory is required when checking the compatibility of your vehicle.
Detailed Information in the specific installation instructions of the CANbus
General instructions
Please check car installation manual and follow instructions for lamp replacement. Please change lamps in pairs.
Installation
The LED light source, cables and components must be mounted in a way that the headlamp won‘t be damaged and that its function is maintained. All parts must be fixed safely. Check correct position and safe fixation of LED lamp within the lamp holder. Consider polarity of W5W-LEDPlease check function of W5W-LED before final installation into the headlamp housing. If needed, please refit the W5W-LED the other way around.
Safety
Lamps will heat up during operation. Do not touch. Please let it cool down in
order to avoid potential injury due to contact with hot surface. Please wear
safety gloves to avoid injuries during mounting. Keep out of reach of
children.
The road-legal range is approved for road use in selected countries and for selected vehicle models only. Check compliance and conditions applicable to your country on Philips.com/roadlegalLED.
Lumileds is the warrantor of this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. © 2023 Lumileds Holding B.V. All rights reserved
Operator // Lewis Cooper-Wells
File name // Lumileds_W5W_User_Manual6 Language_Online
Date // 24.04.23
Format one-up // 360×100
Format litho stepped //
Print Process // off-set
Minimum point // 4pt
This sheet may not be colour accurate. Always refer to current PANTONE Colour Formula Guide for colour matching.
Colour Codes
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>