BLUE SKY OKC3024GDR1DG Outdoor Kitchen 2 Door Cabinet Owner’s Manual

BLUE SKY OKC3024GDR1DG Outdoor Kitchen 2-Door Cabinet

Specifications

• Model(s): OKC3024GDR1DG, OKC3024GD2DG, OKC3024GD2SKDG, OKC3024GDR3DG

Product Information

• We believe in the value and benefits of spending time outdoors.
  Our goal is to provide you with a wide variety of outdoor-related products that allow you to spend endless days outside, generating loads of laughter and creating memories that will last a lifetime.
  Blue Sky Outdoor Living offers high-quality, on-trend, outdoor living products that will bring an enhanced experience to any backyard, outdoor gathering, or adventure.

• Connect with us @blueskyoutdoorliving

Getting Started

Before starting the installation, read the entire guide to familiarize yourself with the safety and location warnings and assembly steps. The installation of any of the Blue Sky Outdoor Kitchen cabinets not performed according to the instructions presented in this guide could void the warranty of the product.

WARNING:

• Wear protective eyewear, gloves, and boots during assembly.
• Always maintain a clean, organized work area.
• Do not stand or sit on cabinet tops, cabinet may become unstable and result in property damage or serious injury.
• If sitting in a cabinet with an extended top, do not use the top to pull yourself up from a chair.
• Do not drag or move cabinets with leveling feet in place.

Parts List – Cabinets

• Unpack parts, making sure all pieces are present before attempting to assemble.
• Assembly and moving of Blue Sky Outdoor Kitchen cabinets should be done by two or more people.

DESCRIPTION| REF PART NUMBERS| OKC3024GD2DG| OKC3024GDR1DG| OKC3024GDR3DG| OKC3024GDSKDG
---|---|---|---|---|---
Cabinet Body| A| 2 DOOR CABINET| 1 DRAWER| 3 DRAWER| 2 DOOR SINK
Cabinet Base| B| 1| 1| 1| 1
Leveling Feet| C| 4| 4| 4| 4
Shelf Bracket| D| 4| 4| 0| 4
Adjustable Shelf| E| 1| 1| 0| 0
Adjustable Sink Shelf| ES| 0| 0| 0| 1
Large Plastic Cap| F| 1| 1| 1| 3
Medium Plastic Cap| G| 0| 0| 0| 4
Small Plastic Cap| H| 8| 8| 8| 8
Large Folding Drawer| I| 0| 0| 2| 0
Large Drawer Front| J| 0| 0| 2| 0
Medium Folding Drawer| K| 0| 1| 1| 0
Medium Drawer Front| L| 0| 1| 1| 0
Large Drawer| ML| 0| 0| 4| 0
Medium Drawer| MM| 0| 2| 2| 0
Drawer Slides| N| 0| 2| 6| 0
Drawer Liner| O| 0| 1| 3| 0
M850 Bolt| P| 4| 4| 4| 4
M850 Nut| Q| 4| 4| 4| 4
M612 Bolt| R| 10| 10| 10| 10
M510 Bolt| S| 0| 12| 36| 0
M4*10 Bolt| T| 0| 20| 60| 0
Parts listed with part numbers can be ordered for replacement
parts.

Assembly

• Tool 1
• Tool 2
• Tool 3

Basic Cabinet Body Assembly

• Now that you have picked your location, attach the leveling feet (C) to the underside of the cabinet base (B). Move the nut down to the bottom of the leveling feet.
• We recommend you start with the leveling foot at its lowest position and then you can easily adjust the leveling foot when the base is in place.

FAQ:

Q: Can the cabinet be moved by one person?

• A: No, assembly and moving of Blue Sky Outdoor Kitchen cabinets should be done by two or more people.

Q: What tools are required for assembly?

• A: The following tools are required for assembly: Tool 1, Tool 2, Tool 3.

TIME WELL SPENT

• We believe in the value and benefits of spending time outdoors.
• Our goal is to provide you with a wide variety of outdoor-related products that allow you to spend endless days outside, generating loads of laughter and creating memories that will last a lifetime.
• Blue Sky Outdoor Living offers high-quality, on-trend, outdoor living products that will bring an enhanced experience to any backyard, outdoor gathering, or adventure.
• Connect with us @blueskyoutdoorliving
• Fill in the following information and retain this manual for future reference:
• MODEL(S):————————
• DATE OF PURCHASE:———————-
• PLACE OF PURCHASE:————————-
• RECEIPT NO:——————–

GETTING STARTED

• All cabinets are inspected before leaving the factory and they have been carefully packaged to prevent any damage during shipping and handling. On occasion, damage in handling between the factory and your home may occur.
• Please inspect each cabinet carefully before assembly and installation. If damage is discovered, contact our Customer Service team at 1-800-459-4409 for quick results to any issues that may arise.
• Take time to review your installation project, what cabinets you have, and how they will be arranged in your space.
• If you have unpacked all your boxes and checked for damage, please make sure not to mix components.
• You can perform a dry fit of the cabinets by laying out the tops (keep their protective film on to prevent scratches) in the selected location to ensure your layout will fit in the desired space.

PICKING A LOCATION

• Make sure there is enough room for the cabinets you are installing.
• Remember to leave about 3 feet for you to walk in front of and at the sides of your cabinet(s).
• The install location should not have a slope of more than 15 degrees and should be made of a hard surface – stone, concrete, wooden or composite decking.
• It is not recommended for installation on a lawn or directly on the ground.
• If you are installing the cabinets next to a BBQ grill or other burning appliance, check the recommended locations for placement in your burning appliance directions. Do not place your outdoor cabinets right next to the burn chamber of a BBQ grill.

FOR YOUR SAFETY

• BEFORE STARTING THE INSTALLATION, READ THIS ENTIRE GUIDE TO FAMILIARIZE YOURSELF WITH THE SAFETY AND LOCATION WARNINGS AND ASSEMBLY STEPS.
• THE INSTALLATION OF ANY OF BLUE SKY’S OUTDOOR KITCHEN CABINETS NOT PERFORMED ACCORDING TO THE INSTRUCTIONS PRESENTED IN THIS GUIDE COULD VOID THE WARRANTY OF THE PRODUCT.

WARNING: EXCESSIVE WEIGHT HAZARD

• Blue Sky Outdoor Kitchen Cabinets should be moved, assembled,d or installed with two or more people to avoid injury from lifting.
• Do not let children climb on the cabinets, hang on doors/drawers or leave children unattended near the cabinets.
• These actions could cause tipping that could lead to serious or fatal injury.
• Securely attach cabinets to a wall or gang several cabinets together using the fasteners included with each cabinet to avoid serious injury.
• Note the listed weight capacities and do not overload cabinets. Overloading could cause cabinets to become unstable and cause serious or fatal injury.

WARNING

• Wear protective eyewear, gloves, and boots during assembly.
• Always maintain a clean, organized work area.
• Do not stand or sit on cabinet tops, cabinet may become unstable and result in property damage or serious injury.
• If sitting in a cabinet with an extended top, do not use the top to pull yourself up from a chair.
• Do not drag or move cabinets with leveling feet in place.
• Electric, plumbing, gas lines, and other utilities are frequently installed or embedded behind walls where cabinets are being installed.
• Before drilling holes or screwing cabinets to outside walls, be sure you will not make contact with any of these utilities.
• Failure to follow these instructions may result in property damage and serious or fatal injury.
• If you do not feel confident in your ability to ensure that you will not make contact with utilities behind a wall during installation, please contact a licensed contractor to install the cabinets.

PARTS LIST – CABINETS

• UNPACK PARTS, MAKING SURE ALL PIECES ARE PRESENT BEFORE ATTEMPTING TO ASSEMBLE.
• If any part is missing or damaged, do not attempt to assemble the product. Contact Blue Sky Outdoor Living directly by email at service@blueskyoutdoorliving.com or by phone at 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST).
• ASSEMBLY AND MOVING OF BLUE SKY OUTDOOR KITCHEN CABINETS SHOULD BE DONE BY TWO OR MORE PEOPLE.

DESCRIPTION| REF| PART NUMBERS| 2 DOOR CABINET OKC3024GD2DG| 1 DRAWER

2 DOOR CABINET OKC3024GDR1DG

| 3 DRAWER CABINET OKC3024GDR3DG| 2 DOOR SINK CABINET OKC3024GDSKDG
---|---|---|---|---|---|---
Cabinet Body| A|  | 1| 1| 1| 1
Cabinet Base| B|  | 1| 1| 1| 1
Leveling Feet| C| 126022| 4| 4| 4| 4
Shelf Bracket| D| 126023| 4| 4| 0| 4
Adjustable Shelf| E| 126024| 1| 1| 0| 0
Adjustable Sink Shelf| ES| 126025| 0| 0| 0| 1
Large Plastic Cap| F| 126026| 1| 1| 1| 3
Medium Plastic Cap| G| 126027| 0| 0| 0| 4
Small Plastic Cap| H| 126028| 8| 8| 8| 8
Large Folding Drawer| I|  | 0| 0| 2| 0
Large Drawer Front| J|  | 0| 0| 2| 0
Medium Folding Drawer| K|  | 0| 1| 1| 0
Medium Drawer Front| L|  | 0| 1| 1| 0
Large Drawer Dividers| ML| 126029| 0| 0| 4| 0
Medium Drawer Dividers| MM| 126030| 0| 2| 2| 0
Drawer Slides| N| 126031| 0| 2| 6| 0
Drawer Liner| O| 126032| 0| 1| 3| 0
M850 Bolt| P| 126033| 4| 4| 4| 4
M850 Nut| Q| 126034| 4| 4| 4| 4
M612 Bolt| R| 126035| 10| 10| 10| 10
M510 Bolt| S| 126036| 0| 12| 36| 0
M4*10 Bolt| T| 126037| 0| 20| 60| 0

• Parts listed with part numbers can be ordered for replacement parts.

ASSEMBLY

TOOLS REQUIRED FOR ASSEMBLY

Included:

• Hex Keys
• Drill Bit Extender
• 4MM Hex Drill Bit

Not Included:

• 4′ to 6′ level
• Screwdriver
• Pliers

BASIC CABINET BODY ASSEMBLY LEVELING THE BASE

• Now that you have picked your location, attach the leveling feet (C) to the underside of the cabinet base (B). Move the nut down to the bottom of the leveling feet.
• We recommend you start with the leveling foot at its lowest position and then you can easily adjust the leveling foot when the base is in place.
• Place the base in the desired location, and make sure it is level using a 4′ to 6′ level. On the front-to-back leveling, have the cabinet slightly lower in the back to allow for moisture to drain off the back.
• NOTE: The hole location for electrical cords is in the back of the base of the cabinet. Adjust the leveling feet if needed.
• Place the large plastic cap (F) in the hole in the back of the cabinet base.

CABINET BODY TO BASE ASSEMBLY

• (ASSEMBLY IS THE SAME FOR ALL CABINETS)
• 2 DOOR CABINET IMAGE IS SHOWN AS EXAMPLE ONLY
• With two people, lift the cabinet body (A) upright with the sticker inside pointing up. One person should hold onto the front edge of the cabinet (do not lift by the doors) while the other pulls out the back of the cabinet so that it is no longer folded.
• With two people, lift the cabinet by the back and front edges of the cabinet frame, and place the cabinet on top of the base that has been leveled. Make sure the hole for the electrical cords is in the back of the cabinet.
• Make sure the cabinet body is properly seated on the base.
• The cabinet body has a snug fit to the base, you may need to use a flat-head screwdriver to guide one side into place or use a rubber mallet to tap it into place so it sits flat on the base.
• Attach the cabinet body to the base by using 6 of the bolts (R) – 3 in the front and 3 in the back of the cabinet.
• Finger tighten until all bolts have been threaded in the nuts that have already been welded into the bottom of the cabinet. When the bolts are all in place – tighten them with the provided hex key or drill bit with an extender (do not over-tighten).
• With two people, turn the cabinet upside down. 2 locations on each side of the bottom of the cabinet need to be secured to the base.
• Finger tighten all 4 bolts (R). When the 4 bolts are in place-tighten them (do not over-tighten).
• With two people, turn the cabinet upright. Check to make sure the cabinet is still level.
• The assembly of the Base Cabinet is complete. Continue with the instructions related to the cabinet you are assembling.

CABINETS WITH SHELVES

(IF YOUR UNIT DOES NOT HAVE A SHELF CONTINUE TO THE NEXT STEP)

• It is easier to set your shelf location with the top off.
• Place the self brackets (D) in the desired location by slipping them into the slots in the corners of the cabinet body.
• The open hook should be facing up towards the top of the cabinet.
• Slide the shelf (E or ES) in place to make sure it is in the desired location.
• If you are installing the ES shelf for the sink cabinet, the open slot should be positioned in the back of the cabinet to accommodate plumbing hoses and drains.
• Then remove the shelf. It will make it easier to install the top. Reinstall the shelf after the top is installed.
• ATTACH THE TOP USING TOP MANUAL (TOP SOLD SEPARATELY)

CABINETS WITH DRAWER ASSEMBLY AND INSTALLATION

• IF YOUR UNIT DOES NOT HAVE DRAWERS CONTINUE TO DETAIL AND FINISHING
• Place your folded drawer (I or K) on a flat clean area for assembly. If you use the top of your cabinet to assemble the drawer(s), please place a protective material on top of the cabinet (like cardboard) to prevent scratching the top of the cabinet.
• Unfold the drawer sides so that they lay flat, remove the drawer dividers, and set them aside. The food-grade liner can stay at the bottom of the drawer.
• Start by folding up the back panel and 1 side panel, and attach the 2 panels by using 2 bolts (S). Finger tighten until both bolts have been threaded in the nuts that have already been welded into place.
• Repeat on all panels until all 8 bolts (S) have been finger-tightened into place-tighten them with the provided hex key (do not over-tighten).
• When assembling the drawer front we recommend arranging the drawer frame assembly so that the front is slightly over the edge of your countertop or work surface.
• This will allow the drawer handle to hang over the edge of the top of the cabinet during assembly and allow the draw front to sit flat.
• Have 1 person hold the corresponding drawer front to the drawer (Medium drawer front L to Medium folding drawer K or Large Drawer Front J to Large Folding Drawer I) in place while attaching to the drawer frame by using 4 bolts (S), 2 on each side of the drawer front. Finger tighten until all bolts are in place. When bolts are all in place-tighten them with the provided hex key (do not over-tighten).
• If assembling the 3 Drawer unit assemble the remaining drawers using the above drawer assembly instructions.

DRAWER SLIDE ASSEMBLY

• CAUTION! DRAWER SLIDES ARE GREASED AND CAN LEAVE RESIDUE.
• Before attaching slides to the cabinet make sure the inside arm is pushed and locked back exposing the front through holes as shown. Repeat for all slides before the next step.
• Assemble the top drawer slides by attaching 2 of the drawer slides (N) onto the top slide location of the inside of the cabinet on each side of the cabinet using 12 bolts (T)- 1 drawer slide and 6 bolts on each side.
• Finger tighten until all bolts are in place.
• When bolts are all in place-tighten them with the provided hex key (do not over-tighten).
• If assembling a 3 Drawer unit continue attaching remaining slides to the cabinet. Note the assembly location of the remaining slides.
• Assemble the middle drawer slides by attaching 2 of the drawer slides (N) onto the 2nd highest slide location of the inside of the cabinet on each side of the cabinet using 12 bolts (T) – 1 drawer slide and 6 bolts on each side.
• Finger tighten until all bolts are in place. When bolts are all in place-tighten them with the provided hex key (do not over-tighten).
• Assemble the bottom drawer slides by attaching the remaining 2 drawer slides (N) to the lowest slide location of the inside of the cabinet on each side of the cabinet using 12 bolts (T) – 1 drawer slide and 6 bolts on each side.
• Finger tighten until all bolts are in place. When bolts are all in place-tighten them with the provided hex key (do not over-tighten).
• With your drawer slides attached to the cabinet extend the inside arm of your drawer slides on both sides.
• Separate the inside arm of your drawer slide by pressing up on the plastic lever on the slide on the right and down on the lever on the slide on the left. Keep the inner slides together as you separate them.
• Repeat drawer slide separation for the remaining drawer slide.

MEDIUM TOP DRAWER

• Assemble slides to the medium top drawer by attaching 2 of the inside arms of the drawer slide that you removed to either side of the outside of the drawer.
• Attach with 8 bolts (T) – 4 on each side, as shown. Finger tighten until all bolts are in place. When bolts are all in place-tighten them (do not over-tighten).
• Make sure the solid edge of the drawer slide is at the front of the drawer and the end with the cutout is at the back of the drawer.

LARGE MIDDLE DRAWER

• Assemble slides to the Large Middle drawer by attaching 2 of the inside arms of the drawer slide that you removed to the top rail of either side of the outside of the drawer. Attach with 8 bolts (T) – 4 on each side, as shown.
• Finger tighten until all bolts are in place. When bolts are all in place-tighten them (do not over-tighten).
• Make sure the solid edge of the drawer slide is at the front of the drawer and the end with the cutout is at the back of the drawer.

LARGE BOTTOM DRAWER

• Assemble slides to the Large Bottom drawer by attaching 2 of the inside arms of the drawer slide that you removed to the bottom rail of either side of the outside of the drawer. Attach with 8 bolts (T) – 4 on each side, as shown.
• Finger tighten until all bolts are in place. When bolts are all in place-tighten them (do not over-tighten). Make sure the solid edge of the drawer slide is at the front of the drawer and the end with the cutout is at the back of the drawer.

DRAWER INSTALLATION MEDIUM TOP DRAWER

• This step is easier with two people.
• Note that the medium drawer goes on top.
• To install the drawer into the cabinet, extend the ball-bearing slides that were installed inside the cabinet, so they stick out beyond the front edge of the cabinet.
• With one person on each side of the drawer. Lift the drawer into position so the inner slide (attached to the drawer) lines up with the ball-bearing slide inside the cabinet. Make sure they are seated properly.
• Then slide the drawer into place.
• You should hear a small click when the slides are engaged. Close the drawer fully (the first time will require a firm closing of the drawer) and then pull the drawer open to make sure they are properly engaged.
• The drawer should not be pulled completely out.
• If assembling a 3-drawer unit repeat the above drawer installation for the remaining 2 large drawers.
• Note that the large drawer with the slides on the top rail goes in the middle drawer location.
• The remaining large drawer with the slides on the bottom rail goes in the bottom drawer location.
• To install a large drawer divider (ML) or medium drawer divider (MM) the notches on the dividers must line up with the tracks on the inside of the front and back panels.
• Once the dividers are lined up slide them side to side until in the desired location. Once in location press down to secure into slot.
• Repeat for remaining dividers.
• Empty the drawer before removing it from the cabinet. It is easier to remove the drawer with two people. To remove the drawer, pull the drawer open enough to fully extend the slides.
• Push up on the black release lever on one side of the inner slide, while pushing down on the black release lever on the other side of the drawer.
• While holding the levers in these positions, pull the drawer outward, towards you, until it is released from the drawer slide.

REFER TO DRAWER INSTALLATION TO RE-INSTALL DRAWERS.

DETAIL AND FINISHING

• With the cabinet assembled and in place, check to make sure it is still level. Adjust the leveling feet if needed. This is a two-person job, one to tip the cabinet back slightly and the other to adjust the leveling feet.
• The cabinets can also be bolted together through 4 locations on each of the side panels using 4 bolts (P) and 4 nuts (Q).
• If the cabinet is not bolted together or if it is a stand-alone cabinet there are caps (H) included to fill the holes and reduce the chance of moisture getting into the cabinet.

FOR CABINETS WITH DOORS:

• If the cabinet doors do not line up, please see the instructions below.
• The hinges can easily be adjusted up or down by loosening the hinge screws attached to the front edge of the frame using provided hex key. Slide the door up or down until the doors are aligned and then tighten the screws.

CARE AND MAINTENANCE

• To keep your cabinets looking clean and fresh, wash them with fresh water, a mild detergent, and a microfiber cloth.

• Then rinse with clean water and dry with a soft cloth, go with the grain on any brushed stainless-steel surfaces. If preferred, you can use products specifically designed to clean stainless steel for the cabinet tops.

• Do not use abrasive cleaners or sponges/pads that are abrasive, these products will dull the finish and harm the longevity of
  the product.

• Also, stainless steel may show “tea” staining if not washed often in coastal locations or near a chlorine or saltwater swimming pool.

• Check cabinets/drawers after a hard rain. If water has penetrated the cabinet – wipe up moisture with a microfiber cloth. Make sure all side button plugs and electrical cord grommets are in place.

• If water enters a drawer, make sure they are securely closed and that the cabinets are leveled per set-up instructions.

• If your stainless-steel tops show signs of oxidization, take the following steps to rejuvenate its appearance. First, try cleaning with fresh water and a non-abrasive cleaning sponge – make sure you are stainless-steel top in the direction of the grain. If you run into a stubborn stain, use a stainless-steel cleanser (follow the cleanser’s direction – follow the cleaner’s warnings with regards to using on a food preparation surface.)

• NOTE: Always rub/wipe/clean the stainless-steel tops with the grain. Wiping across the grain can ruin the finish and cause the stainless steel to lose its brilliance.

• For the glass fronts and aluminum front panels, wash with clean water and mild detergent with a microfiber cloth. Rinse with clear water and dry with a soft cloth.

• Do not use abrasive cleaners or scouring pads on any surface of the cabinet.

• Clean as needed or every three months. If the cabinets are close to a chlorine or saltwater swimming pool or near an ocean, more frequent cleaning is required – every 2 to 3 weeks.

• Water with high iron content can leave rusty residue on the cabinets.

• Extreme heat by a flame – be careful placing your cabinet in direct contact with a BBQ grill or other appliance that generates high heat or flames.

• Salt that is left sitting on the products or gets splashed up on the cabinets in snowy weather can cause corrosion.

• Keeping your new outdoor kitchen cabinets clean will go a long way to extending their appearance and longevity.

• Trapped moisture under cutting boards, rubber mats, metal trays, or cans could lead to corrosion.

• If the color of the cabinet bodies shows signs of fading, a thin layer of car wax can be applied per the wax manufacturer’s directions.

AVOID USING THESE CHEMICALS ON / AROUND THESE CABINETS:

• Products that include strong acids or alkaline can damage your cabinets: Vinegars, white wine, mustard, tomato-based products, lemons, some carbonated beverages, etc.
• Chloride cleansers which include bleach or any other cleaning materials that contain bleach.
• Muriatic acid (often used to clean tile/concrete)

THREE-YEAR LIMITED WARRANTY

• This product is warranted to be free from defects in materials and workmanship for three (3) years from the date of original purchase. This limited warranty is available to the initial purchaser only and is not transferable.
• If this product is defective, contact the local retailer where you purchased your product, or contact Blue Sky Outdoor Living directly by email at service@blueskyoutdoorliving.com or phone at 1-800-459-4409 (Monday–Friday, 8:00 am–4:30 pm, CST). If the product is defective, we will replace the defective part at no cost to you. Please do not ship your product back to the store or us unless we send you written instructions for return.
• In the event it becomes necessary for your product to be returned, we will notify you how to proceed. A copy of your original purchase receipt must accompany the returned product.

WARNING

• Cancer and Reproductive Harm – www.P65Warnings.ca.gov
• www.blueskyoutdoorliving.com
• Quality Craft
• Romeoville, IL 60446
• service@blueskyoutdoorliving.com
• 1-800-459-4409
• www.blueskyoutdoorliving.com
• Made in China / Fabriqué en Chine / Hecho en China
• @blueskyoutdoorliving 02/23

Documents / Resources

| BLUE SKY OKC3024GDR1DG Outdoor Kitchen 2 Door Cabinet [pdf] Owner's Manual
OKC3024GDR1DG, OKC3024GD2DG, OKC3024GD2SKDG, OKC3024GDR3DG, OKC3024GDR1DG Outdoor Kitchen 2 Door Cabinet, Outdoor Kitchen 2 Door Cabinet, Kitchen 2 Door Cabinet, 2 Door Cabinet, Cabinet
---|---

References

• Blue Sky Outdoor Living - Smokeless Fire Pits, Fire Rings & More!
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>