PHOENIX CONTACT IB IL AI 4 EF-PAC Analog Module User Guide

: June 16, 2024
: PHOENIX CONTACT

Table of Contents

PHOENIX CONTACT IB IL AI 4 EF-PAC Analog Module
Product Information
IB IL AI 4/EF-PAC – Analog module
Product Description
Commercial Data
Technical Data
Drawings
Approvals
Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHOENIX CONTACT IB IL AI 4 EF-PAC Analog Module

PHOENIX-CONTACT-IB-IL-AI-4-EF-PAC-Analog-Module-product-
image

Product Information

Specifications

Analog inputs: 4
Voltage range: 0 V … 5 V, -5 V … 5 V, 0 V … 10 V, -10 V … 10 V
Current range: 0 mA … 20 mA, 4 mA … 20 mA, -20 mA … 20 mA
Connection technology: 2-, 3-, 4-conductor
Transmission speed in the local bus: 500 kbps
Degree of protection: IP20
Includes Inline connectors and marking fields

Product Description
The IB IL AI 4/EF-PAC Analog module is designed for use within an Inline station. It is used to acquire analog voltage and current signals.

Advantages

Allows acquisition of analog voltage and current signals
Flexible connection options with 2-, 3-, or 4-conductor technology
High transmission speed of 500 kbps in the local bus
Provides IP20 degree of protection for safe operation
Includes Inline connectors and marking fields for easy installation and identification

Technical Data

Dimensions

Width: 48.8 mm
Height: 135 mm
Depth: 71.5 mm

Interfaces

Inline local bus
Number of interfaces: 2
Connection method: Inline data jumper
Transmission speed: 500 kbps

System Properties

Module ID code (dec.): 223
Module ID code (hex): DF
Length code (hex): 05
Length code (dec): 05
Process data channel: 80 bit
Input address area: 10 Byte
Output address area: 10 Byte
Register length: 96 bit
Required parameter data: 28 Byte
Required configuration data: 4 Byte

Input Data

Analog Input

Description of the input: Analog
Number of inputs: 4
A/D conversion time
A/D converter resolution
Connection method
Connection technology
Note regarding the connection technology
Current input signal

Voltage Input

Input resistance of current input
Voltage input signal
Input resistance of voltage input
Data formats
Limit frequency (3 dB)
Measured value resolution
Protective circuit

Electrical Properties

Maximum power dissipation for nominal condition: 7.68 W
Potentials: Communications power (UL)
Supply voltage
Current draw

FAQ

Q: Can I use this module in potentially explosive areas?
A: No, the use of this module in potentially explosive areas is not permitted in China.
Q: What are the advantages of this module?
A: The advantages of this module include the acquisition of analog voltage and current signals, flexible connection options, high transmission speed, and a degree of protection for safe operation.
Q: What is the maximum power dissipation for this module?
A: The maximum power dissipation for this module under nominal conditions is 7.68 W.

IB IL AI 4/EF-PAC – Analog module

2878447
https://www.phoenixcontact.com/us/products/2878447

Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid.
Inline, Analog input terminal, Analog inputs: 4, 0 V … 5 V, -5 V … 5 V, 0 V … 10 V, -10 V … 10 V, 0 mA … 20 mA, 4 mA … 20 mA, -20 mA … 20 mA, connection technology: 2-, 3-, 4-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields

Product Description

The terminal is designed for use within an Inline station. It is used to acquire analog voltage and current signals.

Your advantages

4 differential signal inputs
Connection of sensors in 2-, 3-, and 4-conductor technology
Current ranges: 0 mA … 20 mA, 4 mA … 20 mA, ±20 mA
Voltage ranges: 0 V … 10 V, ±10 V, 0 V … 5 V, ±5 V
The channels are parameterized independently of one another via the bus system
Parameterization via process data or PCP
Measured values can be represented in four different formats
Resolution depends on the representation format and the measuring range
Process data update of all channels in max. 1 ms
Sensor supply with channel-specific integrated short-circuit and overload protection
Bus-synchronous provision of input values with very low jitter (< 10 μs)

Commercial Data

Item number	2878447
Packing unit	1 pc
Minimum order quantity	1 pc
Sales Key	DR01
Product Key	DRI141
Catalog Page	Page 136 (C-6-2019)
GTIN	4017918996376
Weight per Piece (including packing)	252 g
Weight per Piece (excluding packing)	210 g
Customs tariff number	85389091
Country of origin	DE

Technical Data

Dimensions

Dimensional drawing|
---|---
Width| 48.8 mm
Height| 135 mm
Depth| 71.5 mm
Note on dimensions| Housing dimensions

Notes

Utilization restriction

CCCex note	Use in potentially explosive areas is not permitted in China.

Material specifications

Color	green

Interfaces

Inline local bus

Number of interfaces	2
Connection method	Inline data jumper
Transmission speed	500 kbps

System properties

Module

ID code (dec.)	223
ID code (hex)	DF
Length code (hex)	05
Length code (dec)	05
Process data channel	80 bit
Input address area	10 Byte
Output address area	10 Byte
Register length	96 bit
Required parameter data	28 Byte
Required configuration data	4 Byte
Input name	Analog inputs
---	---
Description of the input	Differential input, including sensor supply (24 V

DC)
Number of inputs| 4
A/D conversion time| max. 10 µs
A/D converter resolution| 16 bit
Connection method| Inline shield connector
Connection technology| 2-, 3-, 4-conductor
Note regarding the connection technology| shielded
Current input signal| 0 mA … 20 mA
4 mA … 20 mA
-20 mA … 20 mA
Input resistance current input| typ. 110 Ω
Voltage input signal| 0 V … 5 V
-5 V … 5 V
0 V … 10 V
-10 V … 10 V
Input resistance of voltage input| typ. 300 kΩ
Data formats| IB IL, IB ST, standardized representation, S7 compatible
Limit frequency (3 dB)| 500 Hz
Measured value resolution| 16 bits (15 bits + sign bit)
Protective circuit| Transient protection; Yes, via arresters
Overload protection of the current inputs; electronic

Product properties

Type	modular
Product type	I/O component
Product family	Inline
Scope of delivery	including Inline connectors and marking fields
Operating mode	Process data mode with 5 words/1 word PCP
Diagnostics messages	Failure of the internal I/O supply I/O error message

sent to the bus coupler
Failure of or insufficient communications power UL I/O error message sent to the bus coupler
I/O error Error message in the process data
User error Error message in the process data

Electrical properties

Maximum power dissipation for nominal condition	7.68 W

Potentials

Power consumption	typ. 950 mW (entire device)

max. 1.25 W (entire device)

Potentials: Communications power (UL)

Supply voltage	7.5 V DC (via voltage jumper)
Current draw	max. 100 mA
typ. 85 mA
---	---

Potentials: Supply of analog modules (UANA)

Supply voltage	24 V DC (via voltage jumper)
Supply voltage range	19.2 V DC … 30 V DC (including all tolerances, including

ripple)
Current draw| max. 20 mA
typ. 13 mA

Potentials: Main circuit supply (UM)

Supply voltage	24 V DC (via voltage jumper)
Supply voltage range	19.2 V DC … 30 V DC (including all tolerances, including

ripple)
Current draw| max. 200 mA
min. 0 mA (No-load)

Supply:

Designation	Sensor supply UiS
Supply voltage	24 V DC (via feed-in from UM)
Current consumption	max. 50 mA (per channel)

Connection data

Connection technology

Connection name	Inline connector

Conductor connection

Connection method	Spring-cage connection
Conductor cross section rigid	0.08 mm²…. 1.5 mm²
Conductor cross section flexible	0.08 mm²…. 1.5 mm²
Conductor cross section AWG	28 … 16
Stripping length	8 mm

Inline connector

Connection method	Spring-cage connection
Conductor cross section, rigid	0.08 mm²…. 1.5 mm²
Conductor cross section, flexible	0.08 mm²…. 1.5 mm²
Conductor cross section AWG	28 … 16
Stripping length	8 mm

Environmental and real-life conditions

Ambient conditions

Ambient temperature (operation)	-25 °C … 55 °C
Degree of protection	IP20
Air pressure (operation)	70 kPa … 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)	70 kPa … 106 kPa (up to 3000 m above sea

level)
Ambient temperature (storage/transport)| -25 °C … 85 °C
Permissible humidity (operation)| 10 % … 95 % (non-condensing)
Permissible humidity (storage/transport)| 10 % … 95 % (non-condensing)
---|---

Standards and regulations

Protection class	III (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Mounting type	DIN rail mounting

Drawings

Dimensional drawing

Dimensions (in mm)
Connection diagram

Connection example

Approvals

$PHOENIX-CONTACT-IB-IL-AI-4-EF-PAC-Analog-Module-01 $4$$ $PHOENIX-CONTACT-IB-IL-AI-4-EF-PAC- Analog-Module-01 $5$$

Classifications

ECLASS

ECLASS-11.0	27242601
ECLASS-12.0	27242601
ECLASS-13.0	27242601

ETIM

ETIM 8.0	EC001596

UNSPSC

UNSPSC 21.0	32151600

Environmental Product Compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally friendly use period: unlimited = EFUP-e
---	---

No hazardous substances above threshold values

Accessories

IB IL SCN-6 SHIELD – Inline shield connector
2726353
https://www.phoenixcontact.com/us/products/2726353

$PHOENIX-CONTACT-IB-IL-AI-4-EF-PAC-Analog-Module-01 $6$$ IB IL FIELD 8 – Labeling field
2727515
https://www.phoenixcontact.com/us/products/2727515

ESL 62X46 – Insert strip
0809502
https://www.phoenixcontact.com/us/products/0809502

Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems: Laser printer, mounting type: insert, lettering field size: 62 x 46 mm, Number of individual labels: 15

IB IL FIELD 2 – Labeling field
2727501
https://www.phoenixcontact.com/us/products/2727501

Labeling field, width: 12.2 mm

ESL 62X10 – Insert strip
0809492
https://www.phoenixcontact.com/us/products/0809492

Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems: Laser printer, mounting type: insert, lettering field size: 62 x 10 mm, Number of individual labels: 72