AILE X1 Blood Pressure Monitor User Manual

AILE X1 Blood Pressure Monitor

Product Information

The AILE X5 blood pressure monitor is a device used to measure blood pressure. It features a time setting function that allows users to set the date and time for accurate measurement and record keeping. The monitor is equipped with a start button for initiating blood pressure measurements, and it automatically records the time stamp for each measurement.

Specifications

• Model: AILE X5
• Power Source: Battery
• Measurement Units: mmHg
• Measurement Range: 0 – 300 mmHg
• Cuff Size: Adjustable, fits arm circumference of 22-42 cm

Product Usage Instructions

Time Setting

1. Install the battery. Note: Each time you change the battery, the time will reset to zero and need to be reset.
2. Press and hold the SET button for 3 seconds. The year will appear in the top right corner, flashing. Be careful not to press any other keys before pressing SET.
3. Press the MEM button and press the flashing year to adjust it to the current year. Note: If you press MEM more than once, the number cannot be adjusted downwards. In such cases, you can reinstall the battery and start adjusting the time again.
4. Once the year is set, press SET again to set the month.
5. Press SET and the month will start flashing. Use the MEM button to adjust it to the current month.
6. After setting the month, press SET again to set the date.
7. Press SET and the date will start flashing. Use the MEM button to adjust it to the current date.
8. Press SET again to set the hour.
9. Press SET and the hour will start flashing. Use the MEM button to adjust it to the current hour.
10. Press SET again to set the minutes.
11. Press SET and the minutes will start flashing. Use the MEM button to adjust it to the current minutes.
12. Finally, press the SET button to confirm and save the year, month, and time settings.

Note: The time needs to be reset after each battery change.

Blood Pressure Measurement
Once the time is set, you can proceed with blood pressure measurement using the following steps:

1. Make sure the cuff is properly positioned on your upper arm.
2. Sit in a comfortable position with your back supported and feet flat on the ground.
3. Press the START button to initiate the blood pressure measurement.
4. Remain still and avoid talking or moving during the measurement process.
5. Wait for the monitor to display your blood pressure readings.
6. Record the measurements if desired. The time stamp for each measurement is automatically recorded.

Frequently Asked Questions (FAQ)

1. How often should I replace the battery?
   The battery should be replaced whenever it is low or depleted. It is recommended to use high-quality batteries for optimal performance.

2. Can I use the blood pressure monitor without setting the time?
   While it is possible to use the blood pressure monitor without setting the time, it is highly recommended to set the time for accurate record keeping and tracking of blood pressure measurements.

How do I contact customer support?
You can contact our customer support team through the following channels:

• Phone: +1 888-875-0846
• E-mail: help@4AILE.COM
• Website: 4aile.com

AILE X5 blood pressure monitor time setting

1. Install the battery Note : Each time you change the battery the time will go to zero. All need to reset the time.
2. Press and hold the SET button for 3 seconds. The year appears in the top right corner (flashing). Be careful not to press other keys before pressing SET.
3. Press the “MEM” button and press the flashing 2021 to turn it into 2023 (current year)Note: If you press MEM more than once, the number cannot be adjusted downwards, you can reinstall the battery and start adjusting the time again.
4. When the year is set, press SET again to set the month next.
5. Press SET and the month will start flashing, then press MEM to start adjusting to the current month.
6. When the month is set, press SET again to set the date next.
7. Press SET and the date will start flashing, then press MEM to start adjusting to the current date.
8. Press SET and the “hour” will start flashing, then press MEM to start adjusting to the current “hour”.
9. Press SET and the “minutes” will start flashing, then press MEM to start adjusting to the current “minutes”.
10. Press the SET button and the year, month and time are all set. The blood pressure can be measured by pressing the “START” button. The time stamp is automatically recorded for each measurement.

Note: The time needs to be reset after each battery change.

• Phone: +1 888-875-0846
• E-mail: help@4AILE.COM
• Website: 4aile.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>