AITI MYMONX Smart Watch User Manual
- June 16, 2024
- AITI
Table of Contents
Smart watch
User Guide
Thanksgiving, I met you in the years like songs.
Thank you for choosing this smart watch. This watch will provide higher help
and enjoyment for your exercise and health. For your convenience, please read
the instructions carefully and follow the steps in the instructions.
Watch quick instructions
Parts introduction
Long
press the side button to turn on the watch
Instruction for Charging
It needs to be charged and activated before using the watch for the first time
Use the equipped magnetic charging cable to attach to your hand The metal
point on the back of the watch, the other end of the charging cable Connect to
USB
charging head or computer US8 connection Just mouth.
Install watch APP
Scan the QR code below or go to major application markets to download and install HealthWear’
Device requirements: iOs 11.0 and above, Android 6.0 and above, support Bluetooth 4.0.
Main function interface
Main interface/dial
On the main interface, long press the touch screen or in the APP menu, click
“theme selection” to enter Switch the main interface/dial.
On the main interface, press the side button or swipe up to enter the function
page, and then press the side button or Swipe down to return to the main
interface.
Pedometer/Distance/Calories
View steps, distance, calories burn in real time It can synchronize apps in time to view motion data.
Body temperature
Switch to the temperature test interface to enter the real-time temperature
detection, the monitoring data can be updated to the APP synchronously, and
there is a test report.
Note: When testing body temperature, the bottom temperature must be in full
contact with the skin (tested after 10 minutes of wearing). The body
temperature test will be affected by the temperature difference of the
environment, which only serves as a warning reminder.
For details, please refer to medical professional equipment and doctor
diagnosis
Heart rate monitoring
Switch to the heart rate monitor interface, Heart rate monitoring, in real-
time The measurement data can be synchronized with the APP in real time with a
test report.
ECG
Long press the front electrode on the ECG test interface, the three electrodes
are in full contact Skin, test, test report needs to be viewed in App
Blood pressure monitoring
Switch to the blood pressure monitor interface, to enter real-time monitoring.
The measurement data can be synchronized with the APP in real time with a test
report.
Note: When measuring blood pressure, please measure by the correct posture The
test result is for reference only, Cannot be used as medical data
Blood oxygen
interface
Switch to the blood oxygen test interface to enter the blood oxygen real-time
detection and measurement data lt can be updated to the AP synchronously, and
there is a test report.
Blood sugar
Switch the watch to the blood sugar test interface to enter blood sugar
monitoring, and the data can be updated to the APP synchronously.Note: The
test results are for reference only and cannot be used as medical data.(Before
measurement, it is recommended to link the APP select “Health Settings” →
Glucose Calibration” in the interface of My Device’, and measure after
calibration)
Sport mode
Click on the sport mode interface to enter the sport mode.
There are multiple sport modes to choose from.
Click the exercise icon to enter the corresponding exercise mode detection.
Swipe up and down to switch sports Mode, click to start calculation, swipe
right to exit the current sport mode.
Weather information
The weather page displays current weather, air quality information, and
tomorrow Condition.
Weather information needs to be connected to the client before data can be
obtained If you.
disconnect for a long time, the weather information will not be updated.
Note : Phone settings need to be turned on for positioning
Sleep monitoring function
When you fall asleep, your watch automatically determines that you’re in sleep
detection mode. atomically detects how long you’ve been sleep/light
sleeping/sleeping all might, calculates the quality of your sleep and updates
your sleep
data to the APP synchronously Note Wear your watch to sleep before you have
sleep data.
Stopwatch
Tap the stopwatch to enter the stopwatch function, and swipe night to exit
music
when connected tap music to control the music player camera
In the connected state tap the camera to remotely take pictures with the
mobile phone Click to take a photo and swipe right to exit Shortcut
function
wipe down on th mnain interface to enter the shortcut function interface
select Do not disturb reformation About Settings and other options, click the
icon to You nester the corresponding function
information
Click on the message to view the content of the message scroll up and down to
turn pages Swipe night to exit
About
Chick the about icon to disply the machine model and last four digits of the
luetooth address
Brightness
Click the brightness icoto freely select the fen brightness
Raise your wrist
ap the wrist lift icon to enter, you can choose to open or close the wrist
lift
Reset
Click the reset icon to enter, you can restore the factory settings of the
watch
Shutdown
Chick the shutdown icon toenter, you&an shutdown
Other feature reminders.
he reminder function needs toset the on render $witch oath A9pgide dip the
phone inditch connected successfully in utoothtotherness.eig vibrato rennet
Basic parameters
Connection mode Blue tooth connection
opt. 5V,00A MAX
Device requirements. Android6 0or i0S 11.0 and above
Caution
- Prohibit the us of an adapter with charging voltage greater than $¥ charging current greater than 2A, nd charging time of2-3hours.
Special note
- This product is not medical device, the merriment results are for reference only, not for ay medical purposes and basis Please follow your doctor s instructions and do Ortley on the test results for self-diagnosis and treatment This manual is based on existing information, in the spirit of continuous improvement, the principle of continuous development, th company reserves the fight to change product specifications and functions, and any product described in this manual to modify and improve
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>