ALPENHEAT AH11 Wireless Hotsole User Manual
- June 16, 2024
- ALPENHEAT
Table of Contents
user manual
fire WireLess HotSole Model: AH11
APP FUNC TION
AH11 Wireless Hotsole
WITH APP FUNC TION!
****MAINTENANCE RULES
FOR LI-ION AND LI-PO BATTERIES:
-
The first charging process is very important!
Please charge the battery completely before the first use. -
If a battery is discharged below its nominal voltage, this might trigger further processes, which could damage or destroy the battery.
-
Therefore, ALPENHEAT batteries have built-in electronics that switch off the device before such a deep discharge happens.
-
Frequent overcharging can permanently damage the battery.
That’s why the charger stops the charging process automatically as soon as the battery is fully charged. Repeatedly reconnecting a charged battery to the power supply will not increase the charging level! -
Charging should normally only be carried out at room temperature (about 18°C – 21°C). Avoid charging a cold battery, as this might damage the cells. Allow the battery to warm up at room temperature in order to charge it under ideal conditions.
-
High temperatures might also damage the battery. Never leave the battery in the sun or in the car on hot and sunny days.
-
Li-Ion batteries and Li-Polymer batteries should ideally be stored at room temperature.
-
Fully charged or empty Li-ion batteries should not be stored for a longer period of time. In complex tests, the optimum storage condition was determined at a capacity of 30 % to 50 % and at a low temperature, but not below 0 °C.
-
Storage at -5 °C to 45 °C (Li-Ion) and at 0 °C to 40 °C (Li-Polymer) is possible, but not recommended
-
Batteries have to be charged every 6 months.
-
Even if not in use batteries lose energy.
A Li-Ion battery loses about 3 % to 5 % per month. -
Always dispose of used and old batteries in an environmentally correct way.
ALPENHEAT Bootheaters WIRELESS HOTSOLE
Model: AH11 with APP-function
AT A GLANCE:
- 1 pair of insoles with integrated heating elements and batteries
- 1 USB charging cable
- 1 adaptor for USB charging cable
INSTRUCTIONS
SAFETY INSTRUCTIONS
Keep the product out of the reach of small children, as it contains small
parts which could be swallowed. This product should not be used by individuals
unable to determine when the temperature is too hot or too cold. Small
children are more sensitive to hot and cold.
Certain illnesses, e.g. diabetes, can cause impaired temperature sensitivity.
Persons with disabilities or infirm persons might not be able to communicate
that they are too warm or too cold. Therefore the product is not suitable for
children under the age of three, the infirm or individuals insensitive to
heat. If in doubt or if you have cardiovascular problems consult your doctor
before using the product. Only use the original recharger supplied with the
product for charging the batteries. It has been designed for indoor use only
and should not be exposed to moisture. Alpen heat products are not compatible
with one another or with products from other manufacturers, so never use
chargers, heaters or battery packs from other products. Do not insert metal or
other objects into the connection sockets or plug as this can damage the
product. If you notice that the connection cables or any other parts are
damaged, do not use the product. Do not make any changes to the product and do
not use it for any purpose other than intended.
CHARGING BATTERIES
The integrated batteries have to be charged before each use.
Batteries only reach their full capacity after having been charged several
times.
To achieve the full capacity, proceed as follows:
-
Plug the Y cables of the charger into the back of both insoles. The socket for charging is next to the manual control switch and LED. Insert the charger into a household outlet.
Charge the batteries overnight prior to first use. Both insoles should be charged at the same time for about 6 hours. The insoles need to be turned off during charging. -
The LED on the insoles indicates that the batteries are being charged.
The insoles have 4 different light states during charging:
Blink red: 1 – 33% Power
Blink yellow: 34 – 66% Power
Blink green: 67 – 99% Power
Full green: 100% Power -
The insoles are now ready for use.
Note : Insoles never work during charging
When using the insoles for the first time or if they have not been used for a
long time, the integrated batteries should be discharged and charged. Plug the
recharger into a standard household outlet. Do not use the recharger near
sources of moisture. If you are travelling make sure the power is on and that
the power to that outlet is not turned off with the light switch, as is
customary in some hotel rooms. A shaver outlet is not suitable and should not
be used.
It is normal for the recharger to get warm whilst charging. Charge the
batteries at an ambient temperature between 10° – 35° C / 50° – 95° F. The
storage temperature should not exceed 50° C / 122° F otherwise the batteries
could be damaged.
BATTERY CARE
Excessive charging is prevented by the charging control in the batteries.
Occasional insufficient recharging (less than 4 hours) does not harm the
batteries.
However, frequent insufficient charging over a period of weeks does result in
a reduction of the performance capacity. Completely charge the batteries to
increase the performance capacity. Completely discharging the batteries
insures extremely efficientutilization. If this is not done regularly, the
charging capability will also be impaired.
To increase the performance capacity of the batteries, completely charge them,
and completely discharge them. Charging can be interrupted. However, the
longer the interruption e.g. a week or a month, the more important it is to
completely discharge and charge the batteries as recommended.
Fully charge the batteries every 3-6 months to prolong the battery life.
USING FOR THE FIRST TIME
Cut the insole to the size of your foot. Follow the instructions on the insole. Do not cut the heating element or the battery. The cutting marks serve as a guide. Place insoles into shoes.
GETTING STARTED:
Connect the insoles with the APP: download the free APP
-
Press the button on the heated insole for about 3 seconds to turn it on.
The red LED on the insole will light up. Repeat with the second insole. -
Activate Bluetooth on your phone, then open the APP.
-
In the APP: select insoles in the main overview of products
-
In the APP: click on the blue blinking Bluetooth connection icon on the insoles
-
In the APP: select the correct insole (left and/or right)
-
Now the insoles are connected with your APP
-
Click the heat level button in the APP to change the temperature, or press the button on the insole to change the temperature.
-
Click the on/off button in the APP to turn into stand-by mode, LEDs blink.
-
The blinking lights in stand-by mode, show the battery status level (red light blinking = 0-33% charged; yellow light blinking = 34-66% charged, green light blinking = 67-100% charged)
-
To turn off the insoles completely for storage, press the on/off button on each insole.
This will turn the insoles on (red light shining). Press on on/off button on each insole again, the lights will go out completely and the insoles are turned off.
CAUTION!
- If you know that you sometimes experience loss of sensation, consult your doctor before using the product.
- Stop using if your skin turns red. Excessive exposure to heat can lead to burns.
- Only use the charger supplied to charge the batteries
- Do not open or damage the batteries.
- Do not throw batteries into open fire. Dispose of used batteries properly.
- Do not modify the product or use it for any purpose other than intended.
- Repairs and modifications are only to be carried out by the manufacturer, his service agents or similarly qualified persons in order to avoid any hazard.
- To ensure a long product life, store the fully charged batteries in a dry environment at room temperature.
- Detach the batteries from the charger when not in use.
DISPOSAL OF PRODUCT
This product must be disposed of according to the prevailing guidelines for disposing of used electrical and electronic appliances. The symbol on the product or on its packaging indicates that this product must not be treated as household waste, but must be disposed of at a collection point for the recycling of electrical and electronic appliances. The product contains lithium-ion (Li-Polymer) batteries. The batteries themselves must not be taken apart, thrown into a fire or short-circuited. The batteries must be disposed of properly. Appropriate containers for battery disposal are available in shops that sell batteries, as well as at municipal waste collection places. By your contribution to the correct disposal of this product you are helping to protect the environment and the health of your fellow mankind. Human health and the environment are endangered by inappropriate waste disposal. Recycling helps to reduce the consumption of raw materials.
ALPENHEAT IS NOT RESPONSIBLE FOR ANY DAMAGE TO THE PRODUCT OR INJURY TO THE
USER CAUSED BY MISUSE OF THE PRODUCT.
MANUFACTURER´S LIMITED GUARANTEE
ALPENHEAT guarantees that this product is free from defects in material or
workmanship. The guarantee period starts on the date on which the product was
first purchased by an end customer. In the case of repairs or exchange, the
guarantee period is neither extended nor does it begin anew. Should a defect
occur during the guarantee period, the product has to be immediately returned
to an authorized ALPENHEAT dealer, together with the corresponding dated
purchase invoice. Within the guarantee period ALPENHEAT will at their sole
decision repair or exchange the product.
EXCLUSION AND LIMITATIONS
Batteries or battery packs are excluded from the guarantee. ALPENHEAT gives no
guarantee for damages caused by accidents, negligence or improper use.
Furthermore, textile wear, change of appearance, any product modification,
damage to the product are also excluded from the guarantee. The manufacturer’s
limited guarantee does not affect statutory warranty rights. If the defect is
detected after the manufacturer’s limited guarantee has expired or it is not
covered by this guarantee or there is no purchase invoice provided, ALPENHEAT
reserves the right to determine and suggest which steps be taken (repair or
exchange at the expense of the customer) at ALPENHEAT’s sole discretion.
Model: AH11 with APP-function
Read instructions!
Do not dispose into domestic waste.
Subject to change or modification without prior notice
THANK YOU FDR BUYING FROM US Enjoy our product
ALPENHEAT Produktions- & Handels GmbH
Kirchweg 1/3, 8071 Hausmannstatten, Austria, Europe
T: +43 3135 82396 _
M:office.eu@alpenheat.com
www.alpenheat.com
Documents / Resources
|
ALPENHEAT AH11 Wireless
Hotsole
[pdf] User Manual
AH11 Wireless Hotsole, AH11, Wireless Hotsole, Hotsole
---|---