TRIMUI TG5040 Smart PRO Handheld Game Console Instruction Manual

: June 16, 2024
: TRIMUI

Table of Contents

UNIT AT A GLANCE
How to Use
UNIT Detail
FCC Warning
SPECIFICATION
INCLUDE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TRIMUI TG5040 Smart PRO Handheld Game Console

TRIMUI TG5040 Smart PRO Handheld Game Console

UNIT AT A GLANCE

Volume
Host
Power
R 1
R 2
L 1
L 2
A Key
B Key
X Key
Y Key
D pad
Joystick
Start
Select
Speaker
Indicator
Menu
3.5 mm
TF card
DC
Function key
Lanyard Hole
Microphone

How to Use

How to switch views?

On the simulator page, press START to switch between flow view and grid view.

How to search game?

To search for games across all emulators, press the SELECT button on the emulator page. Alternatively, you can open the menu by pressing the MENU button, select “Search”, and press the A button to initiate the search.

How to edit the emulator list?

You can open the menu by pressing the MENU button, select “Edit”, and press the A button to initiate edit mode To check or uncheck the checkbox, press A To select the simulator you want to display, check 1t To remove the check for the simulator you want to hide, uncheck it Press B to display a window asking if you want to save the changes Select “Ok” and press A to confirm the save and finish editing.

How to start net play with other people via LAN?

Make sure all players have the same game ROM, 2. All players connected to the same WLAN, 3 All players turn on the net play function in the “System” 4 Host player enter the game directly; S. After a while, the slave players will be able to discover the game found on the host in “Netplay”. The slave can select it and press A to join the game
[NOTE] Please wait until the host is playing the game before the slave joins the game. If the host only starts the game but does not play the game, the slave may fail to join the game at this time.
How to start netplay with other people via hotspot?
Make sure all players have the same game ROM;2. Host player open hotspot, slave players connect the hotspot;
All players turn on the netplay function in the “System”,
Host player enter the game directly, 5 After a while, the slave player will be able to discover the game found on the host in “Netplay”. The slave can select it and press A to join the game.
[NOTE] Please wait until the host 1s playing the game before the slave join the game. If the host only starts the game but does not play the game, the slave may fail to join the game at this time

UNIT Detail

FUNCTION KEY

User scene switch

HOST

Accessory

FIRMWARE UPDATE

Shutdown status
Place the mirror file in the root directory of the TF card
Insert the TF card slot and connect the charging line to enter the charging mode. and the automatically start up and upgrade

FCC Warning

This device complies with part 75 of the FCC Rules Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 75 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measure.

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help