PHOENIX CONTACT 2878036 Analog Module User Guide
- June 16, 2024
- PHOENIX CONTACT
Table of Contents
- PHOENIX CONTACT 2878036 Analog Module
- Product Information
- Product Usage Instructions
- FAQ
- Commercial Data
- Technical Data
- Electrical properties
- Connection data
- Environmental and real-life conditions
- Drawings
- Connection diagram
- Approvals
- Classifications
- Accessories
- CONTACT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PHOENIX CONTACT 2878036 Analog Module
Product Information
Specifications
- Analog outputs: 8
- Voltage ranges: 0 V … 10 V, -10 V … 10 V, 0 V … 5 V, -5 V … 5 V
- Connection technology: 2-conductor
- Transmission speed in the local bus: 500 kbps
- Degree of protection: IP20
Your Advantages
-
Commercial Data:
- Item number: 2878036
- Packing unit: 1 pc
- Minimum order quantity: 1 pc
- Sales Key: DR01 DRI142
- Catalog Page: 143 (C-6-2019)
- GTIN: 4046356048439
- Weight per Piece (including packing): 245.2 g
- Weight per Piece (excluding packing): 215 g
- Customs tariff number: 85389099
- Country of origin: DE
Product Usage Instructions
Installation
- Ensure that the power supply is turned off.
- Connect the module to the Inline connectors using the provided connectors.
- Make sure the connections are secure.
Configuration
- Refer to the user documentation for detailed configuration instructions.
- Set the desired voltage range for the analog outputs.
- Configure any additional parameters as required.
Connection
- Connect the input devices to the module’s analog outputs using 2-conductor cables.
- Ensure the cables are properly stripped and connected.
- Double-check the connections for accuracy.
Power On
- Turn on the power supply.
- Verify that the module is receiving power.
FAQ
- Q: What is the degree of protection for this module?
- A: The degree of protection is IP20.
- Q: What is the transmission speed in the local bus?
- A: The transmission speed is 500 kbps.
- Q: How many analog outputs does this module have?
- A: This module has 8 analog outputs.
Please be informed that the data shown in this PDF document is generated from
our Online Catalog. Please find the complete data in the user documentation.
Our General Terms of Use for Downloads are valid.
Inline, Analog output terminal, Analog outputs: 8, 0 V … 10 V, -10 V … 10 V, 0
V … 5 V, -5 V … 5 V, connection technology: 2-conductor, transmission speed in
the local bus: 500 kbps, degree of protection: IP20, including Inline
connectors and marking fields
Your advantages
- Short update time of < 1 ms
- Short-circuit-proof current outputs
- Bipolar outputs
- Measured value acquisition with a resolution of 16 bits
Commercial Data
- Item number: 2878036
- Packing unit: 1 pc
- Minimum order quantity: 1 pc
- Sales Key: DR01
- Product Key: DRI142
- Catalogue Page: Page 143 (C-6-2019)
- GTIN: 4046356048439
- Weight per Piece (including packing): 245.2 g
- Weight per Piece (excluding packing): 215 g
- Customs tariff number: 85389099
- Country of origin: DE
Technical Data
Dimensions
Dimensional drawing|
---|---
Width| 48.8 mm
Height| 136.8 mm
Depth| 71.5 mm
Notes
Utilization restriction
EMC note| EMC: class A product, see manufacturer’s declaration in the download
area
---|---
Interfaces
Inline local bus
Connection method | Inline data jumper |
---|---|
Transmission speed | 500 kbps |
Transmission physics | Copper |
System Properties
Module
ID code (dec.) | 223 |
---|---|
ID code (hex) | DF |
Length code (hex) | 05 |
Length code (dec) | 05 |
Process data channel | 80 bit |
Input address area | 10 Byte |
Output address area | 10 Byte |
Register length | 96 bit |
Required parameter data | 27 Byte |
Required configuration data | 5 Byte |
Output data
Analog
Output name | Analog outputs |
---|---|
Connection technology | 2-conductor |
Note regarding the connection technology | shielded |
--- | --- |
Number of outputs | 8 |
D/A converter resolution | 16 bit |
Protective circuit | Transient protection of outputs |
Data formats | IB IL, IB ST, IB RT, standardized representation, S7 compatible |
Representation of output values | 16 bits (15 bits + sign) |
Process data update | < 2 ms (depends on operating mode) |
Voltage output signal | 0 V … 10 V |
-10 V … 10 V
0 V … 5 V
-5 V … 5 V
Load/output load voltage output| > 2 kΩ 0.05 %
Product properties
Type | modular |
---|---|
Product type | I/O component |
Product family | Inline |
Scope of delivery | including Inline connectors and marking fields |
Electrical properties
Potentials: Communications power (UL)
Supply voltage | 7.5 V DC (via voltage jumper) |
---|---|
Current draw | typ. 80 mA |
Potentials: Supply of analog modules (UANA)
Supply voltage | 24 V DC (via voltage jumper) |
---|---|
Supply voltage range | 19.2 V DC … 30 V DC (including all tolerances, including |
ripple)
Current draw| typ. 72 mA
Connection data
Connection technology
Connection name | Inline connector |
---|
Conductor connection
Connection method | Spring-cage connection |
---|---|
Conductor cross-section rigid | 0.08 mm²…. 1.5 mm² |
Conductor cross-section flexible | 0.08 mm²…. 1.5 mm² |
Conductor cross-section AWG | 28 … 16 |
Stripping length | 8 mm |
Inline connector
Connection method | Spring-cage connection |
---|---|
Conductor cross-section, rigid | 0.08 mm²…. 1.5 mm² |
Conductor cross-section, flexible | 0.08 mm²…. 1.5 mm² |
Conductor cross-section AWG | 28 … 16 |
Stripping length | 8 mm |
--- | --- |
Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation) | -25 °C … 55 °C |
---|---|
Degree of protection | IP20 |
Air pressure (operation) | 70 kPa … 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa … 106 kPa (up to 3000 m above sea |
level)
Ambient temperature (storage/transport)| -25 °C … 85 °C
Permissible humidity (operation)| 10 % … 95 % (according to DIN EN 61131-2)
Permissible humidity (storage/transport)| 10 % … 95 % (according to DIN EN
61131-2)
Standards and regulations
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
---|
Mounting
Mounting type | DIN rail mounting |
---|
Drawings
Connection diagram
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2878036.
EAC
Approval ID: TR TS_D_01921-19
UL Listed
Approval ID: FILE E 140324
cUL Listed
Approval ID: FILE E 140324
UAE-RoHS
Approval ID: 22-04-13078
cULus Listed
Classifications
ECLASS
ECLASS-11.0 | 27242601 |
---|---|
ECLASS-12.0 | 27242601 |
ECLASS-13.0 | 27242601 |
ETIM
ETIM 8.0 | EC001596 |
---|
UNSPSC
UNSPSC 21.0 | 32151600 |
---|
Environmental Product Compliance
REACh SVHC | Lead 7439-92-1 |
---|
Accessories
- IB IL SCN 6-SHIELD-TWIN – Inline shield connector 2740245
- https://www.phoenixcontact.com/us/products/2740245. Inline shield connector.
- Labelling field, width: 12.2 mm
ESL 62X10 – Insert strip
Insert strip, Sheet, white, unlabeled, can be labeled with: Office printing systems, CMS-P1-PLOTTER, mounting type: insert, lettering field size: 62 x 10 mm, Number of individual labels: 72
IB IL SCN-6 SHIELD – Inline shield connector
2726353
- https://www.phoenixcontact.com/us/products/2726353.
- Inline shield connector.
CONTACT
- Phoenix Contact 2023 © – all rights reserved
- https://www.phoenixcontact.com.
- Phoenix Contact USA
- 586 Fulling Mill Road
- Middletown, PA 17057, United States
- (+717) 944-1300
- info@phoenixcon.com.
References
- Phoenix Contact United Kingdom
- IB IL AO 4/8/U/BP-PAC - Analog module - 2878036 | Phoenix Contact
- IB IL AO 4/8/U/BP-PAC - Analog module - 2878036 | Phoenix Contact
- IB IL FIELD 2 - Marking field - 2727501 | Phoenix Contact
- IB IL SCN-6 SHIELD - Inline shield connector - 2726353 | Phoenix Contact
- ESL 62X10 - Insert strip - 0809492 | Phoenix Contact
- IB IL SCN-6 SHIELD - Inline shield connector - 2726353 | Phoenix Contact
- IB IL SCN 6-SHIELD-TWIN - Inline shield connector - 2740245 | Phoenix Contact
- IB IL AO 4/8/U/BP-PAC - Analog module - 2878036 | Phoenix Contact
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>