My Adapt™/PowerLifter®/PowerClean Ion Pet 2-in-1 Cordless Vacuum has No Power/Lights Flashing | Support
- June 7, 2024
- Bissell
Table of Contents
LED Display Status
During Charging
Battery Status| Light Status
Charging| Blinking red light (1 second)
Fully Charged| Green light (on 10 minutes, then blinks every 1 minute)
Charger, Battery, or Motor Error| Red & Green blinking light > Contact
Us
|
During Use
Battery Status| Light Status
In Use| Solid Green Light
Low Power| Blinking Red Light > Charge machine
No Power| Solid Red Light (3 seconds) > Charge machine
Brush Stall| Solid Red Light, then machine shuts off > Follow steps
HERE
-
Check the outlet being used to charge machine
-
Test the outlet with a different device like a cell phone charger or small appliance
-
Verify the Charger being used
- Label on Charger should have model ZD5F230030US
-
If Charger is damaged > Replace Charger > Go to Parts & Supplies
-
Connect Charger to the charging port on the back of the machine & plug into wall outlet
-
For Canada Models 3034C & 3034N
- Charger can not be directly plugged into the machine > Confirm Charger is plugged firmly into the bottom of the Charging Base > And plugged into wall outlet
-
Normal charging behavior: Blinking Red Light
- Full charge: Green Light
- If no LED Lights display, Charger should be replaced > Go to Parts & Supplies
-
Unplug from charger
-
With machine sufficiently charged, Does the machine turn ON?
- Yes, > Great! Glad we can get you back to Cleaning
- No > Remove Hand Vac
- Does the Hand Vac turn ON?
- Yes > The Handle needs to be replaced > Go to Parts & Supplies
- No > The Hand Vac should be replaced > Go to Parts & Supplies
- If the machine turns On then Off after a few seconds it indicates an obstruction in the Brush area > Go to Brush/Foot Area
If still having issues with No Power, please Contact Us
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No