AN HOME BD-649 20W PD Wall Charger User Manual
- June 16, 2024
- AN HOME
Table of Contents
User Manual
Model: BD-649
20W PD Wall Charger
Thank you for choosing our products.
Please read carefully our User Manual before using it, if you have any problem
when using, please contact our customer service, we’ll solve it as soon as
possible.
And any suggestion warm welcomed.
Product Overview
1-1 Introduction
- 20W Type-C PD Wall charger
- USB-C PD Output: 5V/3A,9V/2.22A,12V/1.67A
- Elegant, durable, heat eliminable.
- Over-load, Over-voltage, over-current and short circuit protection.
- Compact and unique appearance design by our own, without any gap.
- Guaranteed Safety: Premium materials and built-in fail-safes keep you and your device protected against shorts.
1-2 Accessories
◆20W USB CHARGER 1EA
◆Color box 1EA
◆User Manual 1EA
Appearance Description
2-1 Technical Parameters
◆Input Voltage: 100-240V~ 50/60Hz 0.5A
◆USB-C PD Output:
5V/3A,9V/2.22A,12V/1.67A
◆Max Power: 20W Max
2-2 Protection
◆Output Short Circuit Protect: on short circuit protection situation, our item
will stop charging to protect devices
◆Over Voltage Protection: protection system will be started
2-3 Material
Plastic Housing: PC+ABS+Fireproof material 2-4 Appearance and Interface
- USB-C PD Output: 5V/3A,9V/2.22A,12V/1.67A
- Connect to alternating current.
Operation Instruction
◆As above picture showed, connect to alternating current AC 100-240V , then
20W PD Charger will work.
If without loading, its internal consumption is about <300mW.
Our item is suitable to use in AC 100-240V constant alternating current, if
higher or lower voltage is unsuitable
Brand: AnHome SmartHome
Manufactured: Shenzhen Baidu Electronics Co., Ltd