Bymore SN2268 Fabric Shaver User Manual

Bymore SN2268 Fabric Shaver

Please read this manual carefully before using and save it for future reference.

Product introduction

A Stainless steel net cover
B Stainless steel 6-leaf blade
C Lint container
D 180° Rotation handle
E Charging indicator
F On/Off Button
G Cleaning brush
H USB charging cable

Connection and Charing

1. Please use the regular plug(1A).When charging, the red light will be on; the indicator light turns green when fully charged. The blue light is on when working, and the blue light flashes when the battery is low.
2. The Fabric Shaver can operate for up to 60 minutes with 2-hour full charge.

Correct Usage

1. Turn on the button.

2. Move around the fluff spot carefully.

3. Turn off the button.

4. Disassemble the lint container and pour out the lint.

5. Rotate the blade net counter clockwise.

6. Disassemble the blade.

7. Cleaning the blade net with brush.

8. Assemble the component accordingly.

Reminder

1. When using the fabric shaver, please place your clothes on a flat surface, an ironing board or cardboard preferably make sure the surface has no wrinkles as this may cause damage.
2. The 180-degree rotating adjustable handle design ensures the best grip.
3. To ensure the blade net tightness. please install the filet at the centre properly when replacing.
4.  Disassemble the Lint container by gripping the handle, then press the lint container down toward the handle.
5. With three different sizes of mesh design, you can remove a large area at once, to tackle all size of pills.

Caution

1. Keep the fabric lint shaver clean and dry.
2. Keep it out of the reach of children.
3. Can’t be used when the cover off.
4. Clean up the inside of the blade and the lint container in time.
5. Keep your fingers away from the mesh area during cleaning.

Cleaning and maintenance

1. Clean up the shaver remover after used, clean the gap between component with the cleaning brush and dump out the waste.
2. Do not use any wet cloth on the product, and keep the product away from any humidity places.

Attention

Do not immerse the product in water or near sources of ignition to avoid danger.|

Prohibit

Do not place the product at high temperatures and avoid exposure under the sun.|

Prohibit

Do not use it in the bathroom.|

Prohibit

Do not use it on the human body.|

Prohibit

Do not touch the blade directly to avoid scratching your fingers when replacing the blade cutter head.|
Do not use the product if it is abnormal or damaged.|

Troubleshooting

Blade wear
Rotation pause| Blade loosening| Re-install in place
Rotation noise
Weak rotation| Backlog of pill fabric| Clean up the
Rotation slow down| The battery is running out| Charge it in time

Product specification

Product Material: ABS+ Stainless Steel blades and cover+ Rubber oil
Rated Frequency:60Hz|
Charging Time:2Hours| Duration: About 60 minutes
Rated Voltage:3.7VDC| Rated Power: 5W Cutter head
Weight: 230g| Size: 14.5 x 8.5 x 21.5cm

What is Included

• 1 X Fabric Shaver
• 3 X Blades
• 1 X Cleaning Brush
• 1 X User Manual
• 1 X USB Charging Cord

Product Support

Your satisfaction is always our top priority.
If you have any question or inquiry, please don’t hesitate to contact us.
Our customer service team are always stand by you.
Contact seller support team through the following steps:

1. Log in to your Amazon account.
2. Open your purchased orders.
3. Click “contact us” under the purchased product.

Email: bymore631@outlook.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>