xiaomi 23076RN8DY Redmi 12 5G 4GB/128GB Smart Phone User Guide
- June 16, 2024
- Xiaomi
Table of Contents
xiaomi 23076RN8DY Redmi 12 5G 4GB/128GB Smart Phone
Product Information
Specifications:
- Model: Redmi 12 5G
- GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone
- Bluetooth and Wi-Fi: 23076RN8DY
EU Regulations:
Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE
/ UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi 23076RN8DY
is in compliance with the essential requirements and other relevant provisions
of the RE Directive 2014/53/ EU.
RF Exposure Information (SAR):
This device is in compliance with Specific Absorption Rate (SAR) limits for
general population/uncontrolled exposure (Localized10-gram SAR for head and
trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP
Guidelines, and RED (Directive 2014/53/EU).
During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no separation and near the body with a separation of 5 mm.
Certification Information (Highest SAR):
- SAR 10 g limit: 2.0 W/Kg
- SAR Value: Head: 0.978 W/Kg, Body: 0.999 W/Kg (5 mm distance)
Frequency Bands and Power:
This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:
-
GSM 900: 35.5 dBm
-
GSM 1800: 32.5 dBm
-
WCDMA band 1/8: 25.7 dBm
-
LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm
-
5G NR band n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm
-
5G NR band n77/n78: 27.5 dBm
-
Bluetooth: 20 dBm
-
Wi-Fi 2.4 GHz band: 20 dBm
-
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm,
5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm -
NFC: 13.56 MHz < 42 dBuA/m at 10m
Product Usage Instructions
Safety Information:
Follow all safety instructions provided in the user manual to ensure safe
usage of the Redmi 12 5G.
RF Exposure Information (SAR):
Take note of the Specific Absorption Rate (SAR) limits mentioned in the user
manual to minimize RF exposure during usage.
EU Regulations:
Ensure that the Redmi 12 5G is used in compliance with the essential
requirements and provisions of the RE Directive 2014/53/EU.
Frequency Bands and Power:
Be aware of the frequency bands supported by the Redmi 12 5G in EU areas and
the maximum radio-frequency power levels for each band.
FCC Regulations:
If using the Redmi 12 5G in regions outside of the EU, familiarize yourself
with the FCC regulations and consult a dealer or experienced radio/TV
technician for assistance.
EU Regulations
RED Declaration of Conformity
Xiaomi Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi 23076RN8DY is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification
RF Exposure Information (SAR)
This device is in compliance with Specific Absorption Rate (SAR) limits for
general population/uncontrolled exposure (Localized 10-gram SAR for head and
trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP
Guidelines, and RED (Directive 2014/53/EU).
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands and placed in positions that
simulate RF exposure during use against the head with no separation and near
the body with a separation of 5 mm.
SAR compliance for body operation is based on a separation distance of 5 mm
between the unit and the human body. This device should be carried at least 5
mm away from the body to ensure RF exposure level is compliant or lower than
the reported level. When attaching the device near the body, a belt clip or
holster should be used which does not contain metallic components and allows a
separation of at least 5 mm to be maintained between the device and the body.
RF exposure compliance was not tested or certified with any accessory
containing metal worn on the body, and use of such an accessory should be
avoided.
Certification Information (Highest SAR)
- SAR 10 g limit: 2.0 W/Kg,
- SAR Value: Head: 0.978 W/Kg, Body: 0.999 W/Kg (5 mm distance).
Frequency Bands and Power
This mobile phone offers the following frequency bands in EU areas only and maximum radio-frequency power:
- GSM 900: 35.5 dBm
- GSM 1800: 32.5 dBm
- WCDMA band 1/8: 25.7 dBm
- LTE band 1/3/7/8/20/28/38/40/41 : 25.7 dBm 5G NR band n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm, 5G NR band n77/n78: 27.5 dBm
- Bluetooth: 20 dBm
- Wi-Fi 2.4 GHz band: 20 dBm
- Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 23 dBm, 5470 to 5725 MHz: 23 dBm, 5725 to 5850 MHz: 14 dBm
- NFC: 13.56 MHz < 42 dBuA/m at 10m
5G connection depends on country, carrier, and user environment.
FCC Regulations
This mobile phone complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy. The exposure standard for wireless
devices employs a unit of measurement known as Specific Absorption Rate, or
SAR.
The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device
has been tested and meets the FCC RF exposure guidelines for use with an
accessory that contains no metal and positions the device a minimum of 1.0 cm
from the body. RF exposure compliance with any body-worn accessory that
contains metal was not tested and certified, and use of such body-worn
accessory should be avoided. Any accessory used with this device for body-worn
operation must keep the device a minimum of 1.0 cm away from the body.
FCC Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Shielded cables must be used with this unit to ensure compliance with the
Class B FCC limits.
E-label
This device has an electronic label for certification information.
To access it, please go to Settings > About phone > Certification, or open
Settings and type “Certification” into the search bar.
Instructions for Factory reset
Path: Settings > About phone > Factory reset
You can quickly erase the local data on the device via “Factory reset”. Data
to be erased includes: Accounts, Contacts, Photos and videos, Apps, Backups,
SD card data and Other items on this device.
Model: 23076RN8DY
2307 indicates that this product will be launched after 202307.
FAQ (Frequently Asked Questions)
What is the SAR value of the Redmi 12 5G?
The SAR value for the Redmi 12 5G is 0.978 W/Kg for the head and 0.999 W/Kg for the body at a distance of 5 mm.
What are the supported frequency bands for the Redmi 12 5G in EU areas?
The Redmi 12 5G supports GSM 900, GSM 1800, WCDMA band 1/8, LTE band 1/3/7/8/20/28/38/40/41, and 5G NR band n1/n3/n7/n8/n20/n28/n38/n40/n41.
Can I use the Redmi 12 5G outside of EU areas?
Yes, you can use the Redmi 12 5G outside of EU areas. However, ensure that you comply with the regulations of the respective region and consult the FCC regulations if applicable.