vornado AIRBAR USB Powered Tower Desk Fan User Manual
- June 16, 2024
- Vornado
Table of Contents
- vornado AIRBAR USB Powered Tower Desk Fan
- Product Information: AIRBAR 4 & AIRBAR 6 Tower 5Circulator
- IMPORTANT SAFETY INSTRUCTIONS
- User Servicing Instructions
- FCC Compliance Statement
- FEATURES
- GETTING STARTED
- REMOTE CONTROL
- TROUBLESHOOTING
- WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
vornado AIRBAR USB Powered Tower Desk Fan
Product Information: AIRBAR 4 & AIRBAR 6 Tower 5Circulator
Specifications
- Model: AIRBAR 4 & AIRBAR 6
- Intended Use: Circulate air in indoor living spaces in the United States
- Usage: Floor use only
- Not intended for commercial or industrial use
- Manufacturer: Vornado
- Contact Information: vornado.com, 800-234-0604, help@vornado.com
Features
- Tower design for efficient air circulation
- Remote control for convenient operation
- Easy to clean and store
- Designed for indoor use only
- Safety features to prevent accidents
- Warranty included
Getting Started
- Unbox the product and remove all packaging materials.
- Place the tower circulator on a flat and stable surface.
- Ensure that the power cord is easily accessible and not tangled.
- Plug the power cord into a standard electrical outlet.
How To Use
- Press the power button to turn on the tower circulator.
- Adjust the speed settings using the control panel or the remote control.
- To change the direction of airflow, use the oscillation feature.
- To set a timer, use the timer function on the control panel or remote control.
- To turn off the tower circulator, press the power button again.
Remote Control
- The remote control allows you to conveniently operate the tower circulator from a distance.
- Use the power button on the remote control to turn the tower circulator on and off.
- Adjust the fan speed, oscillation, and timer settings using the corresponding buttons on the remote control.
- Ensure that the remote control is within range and pointed towards the tower circulator for optimal functionality.
Cleaning & Storage
- Before cleaning, ensure that the tower circulator is turned off and unplugged.
- Use a soft, damp cloth to wipe the exterior of the tower circulator.
- For deeper cleaning, remove the front grill and clean it separately.
- Allow all parts to dry completely before reassembling.
- When not in use, store the tower circulator in a clean and dry location.
FAQ
-
Q: Can I use this product outdoors?
A: No, this product is designed for indoor use only and should not be exposed to weather or elements. -
Q: Can children operate this product?
A: Children should be supervised while operating this product to prevent accidents. It is not recommended for children under 12 years of age to operate this product without adult supervision. -
Q: Can I use this product in water?
A: No, this product should not come into contact with water or be used on wet surfaces. It should not be positioned where it may fall into a bathtub, swimming pool, or any other water container.
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
This owner’s guide and any additional inserts are considered part of the product. They contain important information about safety, use and disposal. Before using the product, please familiarize yourself with all operating and safety instructions. Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See www.vornado.com to view, download and print the most current version of these instructions.
INTENDED USE : This product is intended to circulate the air in indoor living spaces only in the United States. This product is intended for floor use only. This product is not intended for commercial or industrial use. The manufacturer assumes no responsibility for damage or injury due to unauthorized use or product modification. Failure to follow these directions will void the product warranty.
WARNING : Risk to Children and Impaired Persons
Supervision is required during the installation, operation, cleaning and
maintenance of this product by children 12 years of age and younger and anyone
with reduced physical, sensory or mental capabilities. Children should be
supervised to ensure that they do not play with the appliance, its parts and
packaging material.
INSTALLATION WARNING —To reduce risk of fire, electrical shock and injury to persons, observe the following:
- Place this product away from curtains, draperies, tablecloths and other fabrics, since they may be drawn into the product, damage the motor and/or cause a fire.
- No part of this product (the appliance, power cord, plug, packaging, etc.) should be placed near furnaces, fireplaces, stoves or other high temperature heat sources. Do not use this product in a window, on an uneven or unstable surface, or near water.
- The appliance, power supply, power cord and plug cannot come into contact with water. Do not use this product on wet surfaces. Do not use this product in a bathtub or shower or position product where it may fall into a bathtub, laundry, swimming pool or other water container. Do not use this product outdoors or expose it to weather or elements.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over. The cord should not hang over edges of counters or be placed where it can be crimped or closed in doors. Place appliance near an easily accessible outlet so the product can be unplugged quickly during an emergency.
SAFE USE WARNING— To reduce risk of fire, electrical shock and injury to persons, observe the following:
- WARNING: To reduce likelihood of circuit overload, fire and electric shock, do not operate with a solid state speed device, such as a dimmer control switch.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not operate unit if the unit has been dropped or damaged. Do not use this product if it has a damaged power cord or plug. To avoid risk of electrical shock, do not attempt to repair or replace parts. Only original replacement parts may be used. If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Contact Vornado Consumer Service at 1-800-234-0604 (phone) or consumerservice@vornado.com (email) for further instructions about replacement and repair.
- Before plugging power cord into electrical outlet, be sure that all electrical information on the rating label, including voltage, is compatible with your outlet’s power supply.
- Do not sit or stand on product.
- Never use the cord as a handle or otherwise yank, strain or stretch the power cord.
- While the product is plugged in, do not insert or allow foreign objects to enter any input or output opening as this may cause risk of electric shock or fire, or damage the product.
- A loose fit between wall outlet (receptacle) and plug may cause overheating and distortion of the plug. Discontinue use of the product in this outlet. Contact a qualified electrician to replace loose or worn outlets.
- This appliance has a polarized plug (one blade is wider than the other.) To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- Before moving, repositioning, servicing, cleaning and when not in use, use the product controls to turn off the power and then unplug. To disconnect from outlet, grasp and pull only the plug. Also, power off and unplug if the product will be left unattended for an extended period of time or during electrical storms.
SERVICING WARNING —To reduce risk of fire, electrical shock and injury to persons, observe the following:
- Clean your product regularly, only as is instructed in this manual. Prior to cleaning, turn off the power on your product and unplug. Do not use gasoline, thinners, solvents, ammonias or other chemicals for cleaning. Refer to the CLEANING instructions provided.
- Do not open appliance housing. To avoid risk of shock, all service and/or repairs must be done by a Vornado Authorized Service Center.
- This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
User Servicing Instructions
- Using the product controls, turn off the appliance.
- Grasp the plug (not the cord) and disconnect from the outlet.
- Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse as approved by Vornado Consumer Service. For an authorized replacement fuse, please contact Vornado Consumer Service.
- Once the replacement is received, use a small flat-head screwdriver to slide open the fuse cover (located on the plug)(See Fig. A).
- Remove fuse by using the screwdriver to gently lift each end of the fuse (See Fig. B).
- Install the replacement fuse by using the screwdriver to gently push each metal end of the fuse into the receptacle one at a time. Do not push on the center of the fuse—it is fragile and may break.
- Slide the fuse cover closed using the screwdriver. When closed, the cover should fit completely in the plug. No part of
- Plug your appliance into the outlet and turn the power on.
- If the replacement fuse blows, a short-circuit may be present and the product should be discarded or returned to an authorized service facility for examination and/or repair.
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard product if the attachment plug is damaged.
FCC Compliance Statement
NOTE : This equipment has been tested and complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and the receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Contact Vornado Consumer Service or dealer or an experienced radio/TV technician for help.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
Supplier’s FCC Declaration of Conformity
- Unique Identifier : Vornado Model(s) AIRBAR 4, AIRBAR 6 Responsible Party: Vornado Air LLC
- Mailing Address : 415 E. 13th St., Andover, KS 67002
- Contact: www.vornado.com
RF Exposure Statement : This product complies with the FCC RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual.
SAVE THESE INSTRUCTIONS
This Product includes a remote containing a replaceable CR2032 Button Cell Battery (3V).
WARNING
- INGESTION HAZARD: This product contains a button cell or coin battery.
- DEATH or serious injury can occur if ingested.
- A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
- KEEP new and used batteries OUT OF REACH of CHILDREN.
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
|
-
Call a local poison control center for treatment information. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. In the US call the National Poison Control Center at
1- 800-222-1222 or 202-625-3333. -
Even used batteries may cause severe injury or death. New and used batteries may cause injury. Keep new and used cells (or batteries) away from children.
-
Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
-
Ensure the batteries are installed correctly according to polarity (+ and -).
-
Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
-
Do not force discharge, recharge, disassemble, heat above 104˚F / 40˚C or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
-
Non-rechargeable batteries are not to be recharged. Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
-
BATTERY DISPOSAL: Please dispose of batteries according to the local laws and regulations of your region, and while keeping them away from children. Some batteries may be recycled and accepted for disposal at your local recycling center. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
-
Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
FEATURES
-
TOUCH-SENSITIVE CONTROLS
Simple controls with a sleek aesthetic. -
FINGER FRIENDLY DESIGN
Resists curious fingers -
MULTIPLE SPEEDS
3 speed settings for every comfort level. -
VERSATILITY FOR ANY SPACE
Easily position vertically or horizontally. -
MAGNETIC BASE SYSTEM
For quick assembly -
FULL RANGE AIRFLOW
Tilt in desired direction -
SILICONE FEET
Non-marking feet added for stability. -
WARNING : Choking Hazard. Keep small parts like silicone feet away from children and pets.
-
REMOTE CONTROL
Convenience at your finger tips.
When not in use, remote can be magnetically stored on the back of the product.
GETTING STARTED
No tools required.
The AIRBAR can be used in one of two orientations: horizontal or vertical.
For HORIZONTAL orientation
- Lay the fan body horizontally on a soft surface to avoid scratches.
- Install the 2 magnetic base parts, one on each end of the fan body. Take care to align the center notch on each bottom base part with the notch on the fan body.
- Install the 2 magnetic half rounds. When properly installed, the top and bottom base parts will magnetically click into place.
For VERTICAL orientation
- Lay the fan body horizontally on a soft surface to avoid scratches.
- Locate the power cord. This will be the bottom of the product in the vertical orientation.
- Do not put power cord on top.
- Do put power cord on bottom.
- Install the 2 magnetic base parts to the bottom of the fan head (the end with the power cord). Take care to align the notch on each bottom base part with the notches on the fan body.
- Install the 2 magnetic half rounds on the other end of the fan head. Again, take care to align the notches on the base parts with the notches on the fan body. When properly installed, the base parts will magnetically click into place.
- Lift product to vertical orientation to use.
HOW TO USE
REMOTE CONTROL
REMOTE SETUP
The remote that comes with your unit is paired and ready to use out of the
box. If you need to pair a remote, follow these steps:
- Plug the unit in, but do not press to turn product on.
- Remove pull tab completely from the remote.
- Press (+) on the unit. The green LED will begin flashing.
- Press and hold (+) on remote for 3 seconds.
- green LED will stop flashing when remote has successfully been paired.
BATTERY REPLACEMENT
Your remote includes (1) coin style 3V CR2032 battery. Battery comes pre-
installed. Remove battery pull tab before first use. Pre-installed battery has
a one-year life expectancy (dependent on use) after pull tab has been removed
from remote.
- For battery replacement, the remote requires one coin style 3V CR2032 battery. Always use the correct size and grade of battery for this product.
- To replace battery, open battery door on the back side of the remote control (you will need to loosen the small screw on door using a #1 Phillips screwdriver). If necessary, clean the battery contacts and also those of the device prior to battery installation. Remove any plastic protection from the battery and place it
in the remote with the + side facing out. Ensure the battery is installed correctly with regard to polarity. Replace the battery door and screw.
Note : Remove battery from the remote control when not in use for an extended period of time and always remove dead battery immediately and replace with fresh. Do not store dead battery in remote.
WARNING : This product contains a button battery. If swallowed, it could
cause severe injury or death in just 2 hours. Seek medical
attention immediately.
CLEANING & STORAGE
Because your circulator moves a substantial amount of air, it will need
regular cleaning. If service is required, return your circulator to Vornado
(see WARRANTY for instructions).
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the tower before cleaning.
- Unplug unit before cleaning.
- Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust off the tower.
- Wipe down the entire tower with a soft cloth.
Note: Do not use gasoline, thinners, solvents or other chemicals for
cleaning.
During the off-season or after extended periods of non-use, you may choose to
store your circulator. To ensure long like of the product, it is recommended
to store your circulator by following these instructions.
- Unplug power cord and bundle loosely.
- Cover, or place back in retail carton if available. This prevents circulator from accumulating dust over time.
- Store in a cool and dry location.
TROUBLESHOOTING
Unit fails to power on.| |
- Unit is not plugged in. Plug Power Cord into electrical outlet.
- Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
- Fuse needs to be replaced. See IMPORTANT SAFETY INSTRUCTIONS for how to replace the fuse or contact Consumer Service.
---|---|---
Unit is not producing sufficient amount of air.| | Ensure unit is
set to highest setting for maximum air circulation.
Allow the unit to fully circulate the air throughout the room, this may take several minutes. Ensure all air inlets and outlet grille are unobstructed.
Remote Control is not working.| |
- The battery is dead. Replace with new 3 volt CR2032 battery. Refer to REMOTE CONTROL – BATTERY REPLACEMENT for instructions.
- Remote has not been successfully paired. Refer to REMOTE SETUP for instructions.
GFCI has tripped.| | Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip when the user is changing speeds on a Vornado circulator. In this event, change to an outlet that is not connected to a GFCI device. It could also indicate a weak or defective GFCI outlet. Contact a qualified electrician to check the GFCI outlet.
WARRANTY
We expect this product to be perfect. If you’re not satisfied with this product, let us know.
Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser
this Vornado® Whole Room Circulator (“Product”) is free from defects in
material or workmanship for a period of five (5) years from the date of
purchase. If any such defect is discovered within the warranty period,
Vornado, at its discretion, will repair or replace the Product at no cost.
For warranty service: Call
1-800-234-0604 or email
help@vornado.com to obtain a Return Authorization
(“RA”). Please have or include your Product’s model number and serial number,
as well as your name, address, city, state, zip code, e-mail, and phone number
when contacting Vornado for warranty service. To file a contactless warranty
claim, visit vornado.com/contact-us.
After receiving the RA form, ship your Product to: Vornado Air LLC Attn:
Warranty & Repair 415 East 13th Street Andover, KS 67002. For your
convenience, please have your model number and serial number when contacting
Vornado with service inquiries. To assure proper handling, packages must be
clearly marked with the RA number. Packages not clearly marked with the RA
number may be refused at the receiving dock. Please allow 2-3 weeks for
warranty service and return of your Product after the Product is received.
This warranty does not apply to defects resulting from abuse of the Product,
modification, alteration, mishandling, improper maintenance, commercial use or
repair or service of the Product by anyone other than Vornado; damages which
occur in shipment or are attributed to acts of God. Improper product use,
which includes using an external device that
alters or converts the voltage or frequency of electricity, or shipping a
Vornado product to a country not intended for use will void all warranties.
Any unauthorized product modification, repair by unauthorized repair center,
or use of non-approved replacement parts is not recommended and any
consequences will not be covered by support services or product warranties.
The product warranty will be honored only on models that are being used in the
country intended. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER. VORNADO SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON
THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. Some
states do not allow the exclusion or limitation of incidental or consequential
damages, or allow limitations on how long an implied warranty lasts, so the
above limitations or exclusions may not apply to you. This warranty gives you
specific legal rights, and you may have other rights that vary from state to
state. The manufacturer assumes no responsibility for damage caused by failure
to follow these instructions or improper product use. Any such actions will
invalidate the product warranty.
All company names and product names are trademarks of their respective owners.
©
All rights reserved. All technical information, data, and instructions for the
installation, connection, and operation contained in these instructions for
use correspond to the latest available information at time of printing. The
contents of this manual may differ slightly from the actual product. Observe
any additional supplements.
- We’re Here To Help
- 800.234.0604 vornado.com
- help@vornado.com
Designed, engineered and supported in Andover, KS
© 2024 Vornado Air LLC Andover, KS 67002 Specifications subject to change
without notice. Vornado® is a trademark owned by Vornado Air LLC.
Vornado Air, LLC
415 East 13th Street, Andover, Kansas 67002 800.234.0604 |
vornado.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>