SGINX17 Laptop User Manual

June 16, 2024
SGIN

SGINX17 Laptop

SGINX17-Laptop-product

Specifications

  • Model: 21-X12512-V1.0

Product Information

Precautions before Use, Intended Use

Before using the product, please take note of the following precautions:

  • Charge the battery for at least 12 hours before initial start-up.

The intended use of the product is as a laptop computer.

Introduction to Desktop

The product features a desktop interface that allows you to perform various operations.

Basic Operations

Sleep, Restart, and Shut Down

To put the device to sleep, restart, or shut down:

  1. Click on the bottom taskbar.
  2. In the pop-up menu options, choose hibernation, shutdown, or restart.

Wi-Fi, Bluetooth, Flight Mode

You can use Wi-Fi to connect to the internet and Bluetooth to connect to other devices. The device also has a flight mode option for airplane use.

Cortana

Cortana is a voice control feature that allows you to set reminders, write emails, search, and chat with friends and family on messengers.

System and BIOS – System Reset

To perform a system reset:

  1. Click the left mouse button on the button in the lower left corner of the desktop.
  2. Select Advanced options, then select Windows Update, then select Advanced options, then select Recovery, then select Advanced startup.
  3. In the pop-up window, select the Restart now button.

Troubleshooting

If you encounter any issues with the product, refer to the following troubleshooting steps:

Can not turn on the device

If the device does not turn on, press the power button for 5 seconds. If it still doesn’t work, charge it for 30 minutes beforetrying again.

No sound from earphone

If there is no sound from the earphone, check if the volume is set to 0. Test if the earphone is broken and replace it if necessary.

Big noise

If you hear big noise, check if there is dust in the earphone or speaker. Also, check if the sound file is broken.

Screen drift or unresponsive screen

If the screen drifts or becomes unresponsive, refer to further troubleshooting steps in the user manual.

FAQ

How long should I charge the battery before initial start-up?

You should charge the battery for at least 12 hours before initial start-up.

Can I use the device while it is charging?

Yes, you can still use the device while it is charging. However, this will extend the charging time.

How often should I fully charge the battery?

You should fully charge the battery regularly to maintain its performance.

Can I leave the battery empty for a long time?

No, it is not recommended to leave the battery empty for a long time as it may affect its lifespan.

Dear customer:

  • First of all, thank you for your trust in our products. In this world, we met and reached an agreement. Your trust is our most precious gift, and we are very honored and cherished!
  • If you are satisfied with our products, please share with your family and friends. At the same time, please pay attention to whether there are related praise gift activities on the homepage of the purchased sales platform product. We sincerely look forward to
  • your participation and hope that you can click on all the stars in the evaluation as an encouragement to our customer service.
  • Your evaluation is the life of our company’s sustainable development! If you have any questions or help about our products, please contact us as soon as possible through the Amazon website, so that we have the opportunity to provide you with timely and effective help and give us praise. Thank you very much for your tolerance and support!
  • I wish you and your family health and happiness forever. All the staff of SGIN look forward to seeing you again!
    SGIN Brand Division

Important Notes:
Charge the battery for at least 12 hours before initial start-up.

Parameter configuration

  1. This product is suitable for use in non-tropic areas below 2,000 meters

  2. Prevent this product from falling to the ground it could be strongly damaged.

  3. Keep the device away from rain, moisture, direct sunlight and heat source.

  4. Avoid using it in the strong magnetic and strong static environment as much as possible.

  5. Once any water or other liquid splashes onto this product, close it immediately and do not use it until it dries out.

  6. Do not clean this product with any detergent containing chemical elements or other liquid to avoid causing damage due to corrosion and becoming damp. If cleaning is really necessary, clean it with dry soft cloth tissue paper.

  7. Handle the screen gently. To clear fingerprints or dust on the screen, use soft cloth dedicated for camera lens instead of gauze.

  8. Please back up your important files at any time to avoid loss.

  9. Please do not disassemble this product by yourself; otherwise you will lose the right to warranty.

  10. Do not disconnect the device from power suddenly when formatting or up Io ad in g and downloading, which can lead to program errors.

  11. Please use the original AC adapter for charging. Nonconforming chargers may cause harms.

  12. Protect the power cord. When connect the power cord, do not step onto it or place any object on it, which may cause extrusion. Protect the connector of the power cord connected devices specially.

  13. Batteries
    The batteries in this product can not be easily replaced by users themselves. Replacement with incorrect type batteries may cause explosion.

  14. While using the earphone, if the volume is excessively high it may cause hearing damage. So please adjust the volume of the player to a moderate level and balance the time of using.

  15. Pictures in this manual are for demonstration purpose only and may differ from the real product.

  16. Caution!
    This unit contains battery. If the battery is defective, it should not be disposed of with household Waste Batteries can possibly contain harmful substances that can harm the environment and peoples health. Please dispose of the battery commercially or at a municipal recycling plants. Return is free of charge and is prescribed by law. Please only dispose of empty batteries in the containers provided and tape the terminals.

Accessories

SGINX17-Laptop-fig-1

Quick installation of Sgin.

SGINX17-Laptop-fig-2

Use of SGIN laptop.

Boot steps.

SGINX17-Laptop-fig-3

Sleep , restart and shut down.

SGINX17-Laptop-fig-4

Same experience as you use Desktop PC. Click the on the bottom taskbar, and then click the . Finally, in the pop-up menu options, you can choose hibernation, shutdown or restart.

Use WIFI to connect to the Internet Wi-fi, Bluetooth,Flight mode

Touch to Open Setting Tablet to set up Airplane mode / WI-FI / & Bluetooth, and this device can connect to 2.4G and 5G Wifi.

cortana

SGINX17-Laptop-fig-8

System reset

Notice: The Reset progress will take around 3-5 hours, in order to finish the Reset successfully, please connect the adapter to charge the device during the whole Reset progress.

SGINX17-Laptop-fig-9

Click the left mouse button on the button in the lower left corner of the desktop. Select “Advanced options” → select “Windows Update” → select “Advanced options”, select “Recovery” → select “Advanced startup” → find “Restart now” and click the left mouse button → select the “Restart now” button in the pop-up window;

SGINX17-Laptop-fig-10

BIOS-Setting & Bootmanager

Press and hold ” ESC ” button of keyboard immediately after switch on the device by pressing power button. Then different options will appear. Choose option ” SCU ” for BIOS setting and ” Boot Manager for operating system boot option.

Battery charging

  • Connect power adapter to the power port of the device Connect the power adapter plug into a power outlet for charging the battery. Please only use the provided original power adapter.
  • During charging, the icon of battery will be ,and when charging completes, the icon will be
  • You can still use the device while charging, but this will extend the charging time. Use the device at least once a week.
  • Fully charge the battery regularly.
  • Do not leave the battery empty for a long time.

Troubleshooting

  1. Can not turn on the device
    Press the power button for 5 seconds to turn on the device. If the above method doesn’t work, please charge it for 30 minutes before starting.

  2. No sound from earphone
    Check if volume is set to “0”. Test if earphone is broken, if so .please change for another earphone.

  3. Big noise
    Check if there is dust in the earphone or speaker. Check if the sound file is broken.

  4. Screen drift or unresponsive screen
    Switch off the device by a long press (approx. 30 sec.) of the power button.
    (Do not use this way to switch off the device unless it is necessary.)

  5. Windows key cannot active immediately
    First, make sure the Wi-Fi is connected and the Wi-Fi network is a working network. Second, make sure the time zone and system time is correct in your location.
    (Windows key active delay may happen sometimes because of the network speed or other reason if you make sure the above two points are correct and the key still cannot active. Kindly contact with our service team please. We will support you immediately)

  6. How to enter desktop interface when first time starting up.
    Follow the Microsoft Windows 10 starting up guide step by step to enter the desktop interface.

  7. Why my device has already been registered by account name of “default user 0”.
    This is a common software error may happen in Windows 10 when user starting up the device First, press the power button for 5-8 seconds to shut down the device. Do this 3 times, and then power on the device, below content will show up.

  8. Why when I press the keyboard character, in the system it shows another one?
    This may happen because you choose the wrong language when you first time turn on the device. Below is the method to correct the language and input. Choose windows home button at the left bottom side of the desktop.

  9. Windows automatic update may cause some issues recently, below is the method of how to open or close the automatic update function. Click mouse right button(Laptop) on the windows home button at the left bottom side of the desktop. Choose “Task Manager” choose “More details, choose “Services”→ choose “Open Serv ices”→find “Windows Update” click mouse right button (Laptop) on it→ choose “Properties”→ find Startup type and choose the option you want. There are 4 options. Automatic (Delay Start)/Automatic/Manual/Disabled.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals