CELSYS B07CNT946X CLIP STUDIO TABMATE 2 Instructions
- June 16, 2024
- CELSYS
Table of Contents
CELSYS B07CNT946X CLIP STUDIO TABMATE 2 Instructions
Product Information
Thank you for purchasing this product from CELSYS.
**About CLIP STUDIO TABMATE 2
**
- Press and hold the ” (CLIP STUDIO)” button on the unit for three seconds or more to turn the power on and on.
- Press the ” (CLIP STUDIO)” normally to switch between modes (1 – 4).
- The pairing search starts automatically when the power is turned on.
- This product comes with an activation code for 12 months of Clip Studio Paint Debut. To use it, please follow the instructions below and install the app.
Please refer to the web page linked below for information on how to pair your device with Clip Studio Paint, how to change button settings, names for all the parts, how to use the device, and how to use the activation code.
webpage：
https://www.clipstudio.net/promotion/tabmate2/
CLIP STUDIO TABMATE 2 Inquiries：
https://support.clip-studio.com/q/products/clip-studio-tabmate
For Your Safety
WARNING
The following actions are prohibited. These actions may result in fire,
electric shock or other accidents or injuries.
- Do not scratch, modify, forcibly bend, twist or pull on this product.
- Do not disassemble or customize this product.
- Do not use this product for equipment on which people’s lives directly depend, such as medical devices or precision devices; devices responsible for people’s safety; equipment where a malfunction could have a serious impact, such as critical computer systems; or other systems where a high level of reliability is required.
- Do not use this product in areas where the use of electronic devices or devices emitting radio waves is prohibited (hospitals, aircraft, etc.).
If any of the following situations occur, immediately stop using this product and remove the batteries. Otherwise, fire or electric shock may occur.
- If smoke, abnormal heat, a burning smell or other abnormal phenomena occur.
- If water, other liquids (sweat, juice, etc.) or other foreign matter gets into the product.
- If a lightning storm is nearby.
- If this product is broken or subjected to impact such as dropping, bumping, etc.
Do not use, install or leave this product in the following places. Otherwise, fire or electric shock may occur.
- Places with a lot of oil smoke or humidity, such as on a kitchen counter or next to a humidifier.
- Near hot equipment, or in or near direct sunlight.
- Places with a lot of moisture (near water, in a bathroom, outdoors in the rain or snow, etc.).
CAUTION
- This product is a wireless device using the whole of the 2.4GHz band. Operations may be unstable if it is used near devices that produce a magnetic field, static electricity or radio interference. Turn off the device or keep this product away from it.
- A battery is included to check that this product works when using it for the first time. After confirming that this product works, replace this battery with a commercial battery.
- Remove and store the battery if this product will not be used for a long time.
CELSYS, CLIP STUDIO and CLIP STUDIO PAINT are trademarks or registered trademarks of CELSYS, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries. Mac, macOS, iPad OS, and iOS are trademarks or registered trademarks of Apple Inc. in the United States and other countries. Android is the trademark or the registered trademark of Google LLC.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. All other company names and product names described herein are trademarks or registered trademarks of their respective holders. The specifications, price, design, etc. of this product may change without warning.
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
The product complies with the FCC portable RF exposure limit set forth for an
uncontrolled environment and is safe for intended operation as described in
this manual. Further RF exposure reduction can be achieved if the product can
be kept as far as possible from the user body or set the device to lower
output power if such a function is available.
Industry Canada statement
This device complies with ISEDʼ’s licence-exempt RSSs. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FOR PORTABLE DEVICE USAGE (<20m from body/SAR needed)
Radiation Exposure Statement:
The product complies with the Canada portable RF exposure limit set forth for
an uncontrolled environment and is safe for intended operation as described in
this manual. Further RF exposure reduction can be achieved if the product can
be kept as far as possible from the user body or set the device to lower
output power if such a function is available.
FOR MOBILE DEVICE USAGE (>20cm/low power)
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
Cautions for each technical compliance mark
FCC Warning Statements
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provided
with antenna installation instructions and consider removing the no-
collocation statement.
IC Warning Statements
The device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Recommended Version of CE DOC
Hereby, CELSYS Inc. declares that the radio equipment type CES-50037 s in
compliance with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following internet address:
https://www.celsys.com/en/information/eu_doc.
Operating Frequency Range and Maximum Output Power for CE
- Operation Frequency: 2402 MHz” 2480 MHz
- Max. e.i.r.p.: -6.12dbm
LVD (Low Voltage Directive)
May explode or leak if recharged, inserted improperly, or disposed of in fire!
Do not open the battery!
CELSYS, Inc. https://www.celsys.com/en/© CELSYS, Inc.
References
- Clip Studio TABMATE Frequently Asked Questions - Clip Studio Official Support
- CELSYS
- CELSYS
- イラスト マンガ制作アプリ CLIP STUDIO PAINT（クリスタ）