Schneider Electric LVS04509 Profile Busbar Linergy LGYE Installation Guide
- June 16, 2024
- Schneider Electric
Table of Contents
Schneider Electric LVS04509 Profile Busbar Linergy LGYE
Product Information
Specifications
- Brand: Schneider Electric
- Product Range: PrismaSeT
- Product Description: LINERGY LGYE PROFILE 3200A FOR A VERTICAL INSTALLATION LENGTH 1625MM
- Compliance Status: RoHS (10 substances) – Compliant without the use of exemption.
INSTRUCTION
Date: Wednesday, May 17, 2023
Object: Schneider Electric RoHS declaration (RoHS: Restriction of
Hazardous Substances)
Dear Customer,
Effective July 1st, 2006, the European Directive 2002/95/EC -“Restriction
of Hazardous Substances” (RoHS), its recast 2011/65/EU of June 8th, 2011, the
Delegated Directive (EU) 2015/863 of March 31st 2015, restricts the use in
Europe in certain electrical and/or electronic equipment of lead, mercury,
cadmium, hexavalent chromium, polybrominated biphenyls (PBB), polybrominated
diphenyl ethers (PBDE) flame retardant, and from July 22nd 2019,
Bis(2-ethylhexyl) phthalate (DEHP), Butyl benzyl phthalate (BBP), Dibutyl
phthalate (DBP), Diisobutyl phthalate (DIBP).
Schneider Electric decided to make RoHS compliance of its products one of its priorities, even if they do not fall in RoHS’s scope, and most of Schneider Electric’s products are RoHS compliant. This stance is fully in line with Schneider Electric’s environmental policy and EN IEC 63000:2018 standard.
The information below provides the current product status according to
regulation in force at the date of publication of this present document. Any
future changes, either in product design or in the Directive may change the
status reported here. In case the product is inside the legal scope of RoHS,
please note that this document is not the CE declaration. To access to the CE
declaration, please refer to the Schneider Electric download
center.
In the context of the sustainable development policy of our Company, we
continuously work towards products and services that reduce the impact on the
environment or human health when used for their intended purpose and in
conditions stated in the documentation provided by Schneider Electric.
In the following declaration, a “Pro-active compliance” wording means that the
product is not an EEE or not in the legal scope of the regulation, but is in
line with the substances restrictions and corresponding exemptions.
Shall you need any further information or have specific questions (eg. related
to phased-out products), our Customer Care
Centers will support you.
Please Note: You can find more information about Schneider Electric’s
environmental commitment on Green Premium webpage
Best Regards,
Production Date Code
Unless otherwise stated in the table, the data shown in this spreadsheet are
related to the following production Date Code: 20/2023 (Week / Year)
The data shown in this spreadsheet are related to the following version of the
RoHS directive: 2011/65/EU
Commercial ref.
Brand
| Range
Product description
| Compliance status
---|---|---
LVS04509
| PrismaSeT
LINERGY LGYE PROFILE 3200A FOR A
|
RoHS (10 substances) : Compliant without the use of exemption
Schneider Electric| VERTICAL INSTALLATION LENGTH 1625MM|
Installation
- Ensure that the PrismaSeT product is suitable for your specific installation requirements.
- Prepare the installation area by ensuring it is clean and free from any obstructions.
- Follow the provided installation manual to correctly position and secure the LINERGY LGYE PROFILE 3200A for vertical installation.
- Verify that all connections are properly tightened and secure.
Operation
- Before operating the PrismaSeT, ensure that all power sources are properly connected and the unit is adequately grounded.
- Refer to the user manual for specific instructions on how to operate the PrismaSeT.
- Follow all safety guidelines and precautions provided in the user manual.
- If any issues or abnormalities occur during operation, discontinue use and contact Schneider Electric Customer Care Centers for assistance.
Maintenance
- Regularly inspect the PrismaSeT for any signs of damage or wear.
- Clean the product using a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- If any components require replacement, ensure to use genuine Schneider Electric replacement parts.
- Refer to the maintenance section of the user manual for detailed instructions on servicing and maintenance procedures.
Disposal
When disposing of the PrismaSeT product, adhere to local regulations and
guidelines for electronic waste disposal. Do not dispose of the product in
regular household waste.
Frequently Asked Questions
-
Q: Is the PrismaSeT RoHS compliant?
A: Yes, the PrismaSeT is RoHS compliant and does not contain any of the restricted hazardous substances. -
Q: Where can I find more information about Schneider Electric’s environmental commitment?
A: You can find more information about Schneider Electric’s environmental commitment on the Green Premium webpage. -
Q: How can I contact Schneider Electric Customer Care Centers?
A: You can contact Schneider Electric Customer Care Centers by phone at +33 (0)4 76 57 60 60 or visit their website at http://www.schneider- electric.com.
Schneider Electric Industries SAS
Postal address: Le Hive
35 rue Joseph Monier – CS 30323 F-92506 Rueil Malmaison Cedex
Phone: +33 (0)4 76 57 60 60
http://www.schneider-electric.com
Legal information:
Société par actions simplifiée au capital de 896,313,776 euros
954 503 439 rcs Nanterre – code APE : 2712Z
Siret: 954 503 439 01719
n°ident. TVA : FR 04 954 503 439
Siège Social! 35, rue Joseph Monier
F – 92500 Rueil-Malmaison
References
- Schneider Electric Global | Global Specialist in Energy Management and Automation
- Contact Support | Schneider Electric Global
- schneider-electric.com/en/download/search/?docTypeGroup=3541954-Certificates&docType=1555863-Declaration+of+conformity
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>