hama H00121760 DMI Switch 3×1 Instruction Manual

: May 15, 2024
: Hama

Table of Contents

hama H00121760 DMI Switch 3×1
Product Information
Product Usage Instructions
Operating instruction
Explanation of Warning Symbols and Notes
Controls and displays HDMI switching desk
Package contents
Functions
Getting started and operation
Troubleshooting
Care and Maintenance
Warranty Disclaimer
Documents / Resources

hama H00121760 DMI Switch 3×1

hama-H00121760-DMI-Switch-3x1-PRODUCT

Product Information

Specifications

Connections:
- 3 HDMI inputs
- 1 HDMI output
Supported resolutions: 480i/480p/576i/576p/720p/1080i/1080p
HDCP version: Compatible with HDCP 1.4
Supported audio formats: LPCM, Dolby-AC3, DTS7.1, Dolby True HD, DTS-HD master audio
Source selection: Manually via the button on the device, automatically when switching on or via remote control
Power supply: From source device (HDMI input) via USB (5 V/100 mA)

Product Usage Instructions

Explanation of Warning Symbols and Notes

Warning: This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note: This symbol is used to indicate additional information or important notes.

Controls and Displays

The HDMI switching desk has the following controls and displays.
Function LED (HDMI input 1-3)
Power LED
Infrared sensor
Select button (switching the HDMI inputs)
USB port (for power supply)

The remote control is used to control HDMI sources 1-3.

Information about the Power Supply

In some cases, it may be necessary to provide the HDMI switching desk with additional power via the USB socket (5). To do this, connect a micro USB / USB cable to the USB socket (5) and a free USB port on your TV or a USB power adapter (5 V / 100 mA, not included in the delivery package).

Troubleshooting

Problem	Solution
No picture	Provide the HDMI switching desk with additional power via the

USB socket (5).
Poor picture, audio interruptions| N/A

Care and Maintenance

Note: Disconnect the device from the power supply before cleaning it or if it is not going to be used for a long period.

Only clean this product with a slightly damp, lint-free cloth, and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Frequently Asked Questions (FAQ)

Q: How many HDMI inputs does the switching desk have?

A: The switching desk has 3 HDMI inputs.

Q: What resolutions are supported by the switching desk?

A: The switching desk supports resolutions of 480i/480p/576i/576p/720p/1080i/1080p.

Q: How is the source selection done?

A: The source selection can be done manually via the button on the device, automatically when switching on, or via the remote control.

Operating instruction

Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference.
If you sell the device, please pass these operating instructions on to the new owner.
The HDMI switching desk allows you to use three digital HDMI-compatible video sources with digital playback devices that support HDMI.
The switching desk is specifically designed for use in home theatres to operate, for example, a DVD player and a satellite receiver at the same time on a playback device with high-resolution picture quality.

Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

Controls and displays HDMI switching desk

Function LED (HDMI input 1-3)
Power LED
Infrared sensor
Select button (switching the HDMI inputs)
USB port (for power supply)
- Remote control
HDMI sources 1-3

Package contents

HDMI switching desk
Operating instructions

Safety Notes

The product is intended for private, non-commercial use only.
Use the product for its intended purpose only.
Protect the product from dirt, moisture, and overheating, and only use it in a dry environment.
Children should be supervised to ensure that they do not play with the device.
Do not bend or crush the cable.
Do not drop the product and do not expose it to any major shocks.
Dispose of packaging material immediately according to locally applicable regulations.
Do not modify the product in any way. Doing so voids the warranty.
Do not use the product near heaters or other heat sources or in direct sunlight.
Do not use the product in areas where the use of electronic devices is not permitted.
Keep the packaging material out of the reach of children due to the risk of suffocation.
Do not operate the product outside the power limits given in the specifications.
Do not open the device or continue to operate it if it becomes damaged.
Do not attempt to service or repair the product yourself. Leave all service work to qualified experts.
Keep this product, as all electrical products, out of the reach of children!
Use the item only in moderate climatic conditions.
Do not use the product in moist environments and avoid splashes.

Warning – batteries/button cells

When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
Only use batteries that match the specified type. Keep the instructions for the correct choice of batteries included with the operating instructions of devices safe for future reference.
Before you insert the batteries, clean the battery contacts and the polarity contacts.
Do not allow children to change batteries without supervision.
Replace all the batteries in a set at the same time.
Do not mix old and new batteries, or batteries of different types or from different manufacturers.
Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).
Do not short-circuit batteries.
Do not charge batteries.
Do not burn batteries or heat them.
Never open, damage, or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.
Remove spent batteries from the product and dispose of them without delay.
Avoid storing, charging, and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).
Ensure that batteries with damaged housings do not come into contact with water.
Keep batteries out of the reach of children.
Do not swallow batteries or button cells. Burning hazard from hazardous substances.
If the battery compartment will no longer close securely, stop using the product and keep it away from children.

Warning – batteries/button cells

This product contains button cells. If the button cell is swallowed, serious internal burns can occur within 2 hours and ultimately lead to death.
If you suspect that a button cell has been swallowed or is in any part of the body, seek medical attention immediately.
Keep new and used button cells out of the reach of children.

Functions

Easy to switch between up to 3 HDMI sources (e.g. Blu-ray/DVD player, receiver, computer, games console)
Quick and easy switching using a remote control
Automatic selection of the input source when switching on
No additional power supply is required, the power is supplied via the connected devices
Supports 3D and full HD resolution

Getting started and operation

Connect the source devices (e.g. Blu-ray/DVD player, receiver, computer, games console) to the HDMI inputs (input 1-3) using HDMI cables (not included in the delivery package).
The LED that corresponds to the active input (1) lights up.
Now connect your output device (e.g. TV, projector, monitor) to the HDMI outputs using HDMI cables (not included in the delivery package).
Turn on the connected devices. The power LED (2) lights up.
You can now select all inputs via the remote control (6).
It is also possible to select the source directly on the HDMI switching desk using the Select button (4).

Information about the power supply

In some cases, it may be necessary to provide the HDMI switching desk with additional power via the USB socket (5).
To do this, connect a micro USB / USB cable to the USB socket (5) and a free USB port on your TV or a USB power adapter (5 V /100 mA, not included in the delivery package).

Troubleshooting

Problem	Solution
No picture	• Ensure that all cables are correctly connected.

• Check to be sure that all devices are switched on.

• Make sure that the TV is set to the correct channel.

• Connect the HDMI switch to the USB power supply.

• In some cases, it may be necessary to provide the HDMI switching desk with additional power via the USB socket (5).

Poor picture, audio inter- ruptions| • Ensure that all cables are correctly connected.

• Try to connect the HDMI source directly to the output device. If nothing changes, you need to replace the source device.

• Use a 1.4 HDMI cable

• Your HDMI cable should not exceed a total length of 5 m.

• Switch all devices off and then on again.

---|---

Care and Maintenance

Note

Disconnect the device from the power supply before cleaning it or if it is not going to be used for a long period.
Only clean this product with a slightly damp, lint-free cloth, and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Technical Data

**Connections**| 3 HDMI inputs

1 HDMI output

---|---
Supported resolutions| 480i/480p/576i/576p/720p/

1080i/1080p

HDCP version| Compatible with HDCP 1.4
Supported audio formats| LPCM, Dolby-AC3, DTS7.1, Dolby

True HD, DTS-HD master audio

**Source Selection| Manually via the button on the device, automatically when switching on or via the remote control
****Power supply**| From source device (HDMI input) via USB (5 V/100 mA)