hama H00121760 DMI Switch 3×1 Instruction Manual

June 16, 2024
Hama

hama-LOGO

hama H00121760 DMI Switch 3×1

hama-H00121760-DMI-Switch-3x1-PRODUCT

Product Information

Specifications

  • Connections:
    • 3 HDMI inputs
    • 1 HDMI output
  • Supported resolutions: 480i/480p/576i/576p/720p/1080i/1080p
  • HDCP version: Compatible with HDCP 1.4
  • Supported audio formats: LPCM, Dolby-AC3, DTS7.1, Dolby True HD, DTS-HD master audio
  • Source selection: Manually via the button on the device, automatically when switching on or via remote control
  • Power supply: From source device (HDMI input) via USB (5 V/100 mA)

Product Usage Instructions

Explanation of Warning Symbols and Notes

  • Warning: This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
  • Note: This symbol is used to indicate additional information or important notes.

Controls and Displays

  • The HDMI switching desk has the following controls and displays.
  • Function LED (HDMI input 1-3)
  • Power LED
  • Infrared sensor
  • Select button (switching the HDMI inputs)
  • USB port (for power supply)

The remote control is used to control HDMI sources 1-3.

Information about the Power Supply

In some cases, it may be necessary to provide the HDMI switching desk with additional power via the USB socket (5). To do this, connect a micro USB / USB cable to the USB socket (5) and a free USB port on your TV or a USB power adapter (5 V / 100 mA, not included in the delivery package).

Troubleshooting

Problem Solution
No picture Provide the HDMI switching desk with additional power via the

USB socket (5).
Poor picture, audio interruptions| N/A

Care and Maintenance

Note: Disconnect the device from the power supply before cleaning it or if it is not going to be used for a long period.

Only clean this product with a slightly damp, lint-free cloth, and do not use aggressive cleaning agents.

Warranty Disclaimer

Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Frequently Asked Questions (FAQ)

Q: How many HDMI inputs does the switching desk have?

  • A: The switching desk has 3 HDMI inputs.

Q: What resolutions are supported by the switching desk?

  • A: The switching desk supports resolutions of 480i/480p/576i/576p/720p/1080i/1080p.

Q: How is the source selection done?

  • A: The source selection can be done manually via the button on the device, automatically when switching on, or via the remote control.

Operating instruction

  • Thank you for choosing a Hama product.
  • Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference.
  • If you sell the device, please pass these operating instructions on to the new owner.
  • The HDMI switching desk allows you to use three digital HDMI-compatible video sources with digital playback devices that support HDMI.
  • The switching desk is specifically designed for use in home theatres to operate, for example, a DVD player and a satellite receiver at the same time on a playback device with high-resolution picture quality.

Explanation of Warning Symbols and Notes

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

  • This symbol is used to indicate additional information or important notes.

Controls and displays HDMI switching desk

  1. Function LED (HDMI input 1-3)
  2. Power LED
  3. Infrared sensor
  4. Select button (switching the HDMI inputs)
  5. USB port (for power supply)
    • Remote control
  6. HDMI sources 1-3hama-H00121760-DMI-Switch-3x1-FIG-1

Package contents

  • HDMI switching desk
  • Operating instructions

Safety Notes

  • The product is intended for private, non-commercial use only.
  • Use the product for its intended purpose only.
  • Protect the product from dirt, moisture, and overheating, and only use it in a dry environment.
  • Children should be supervised to ensure that they do not play with the device.
  • Do not bend or crush the cable.
  • Do not drop the product and do not expose it to any major shocks.
  • Dispose of packaging material immediately according to locally applicable regulations.
  • Do not modify the product in any way. Doing so voids the warranty.
  • Do not use the product near heaters or other heat sources or in direct sunlight.
  • Do not use the product in areas where the use of electronic devices is not permitted.
  • Keep the packaging material out of the reach of children due to the risk of suffocation.
  • Do not operate the product outside the power limits given in the specifications.
  • Do not open the device or continue to operate it if it becomes damaged.
  • Do not attempt to service or repair the product yourself. Leave all service work to qualified experts.
  • Keep this product, as all electrical products, out of the reach of children!
  • Use the item only in moderate climatic conditions.
  • Do not use the product in moist environments and avoid splashes.

Warning – batteries/button cells

  • When inserting batteries, note the correct polarity (+ and – markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.

  • Only use batteries that match the specified type. Keep the instructions for the correct choice of batteries included with the operating instructions of devices safe for future reference.

  • Before you insert the batteries, clean the battery contacts and the polarity contacts.
    Do not allow children to change batteries without supervision.

  • Replace all the batteries in a set at the same time.

  • Do not mix old and new batteries, or batteries of different types or from different manufacturers.

  • Remove the batteries from products that are not being used for an extended period (unless these are being kept ready for an emergency).

  • Do not short-circuit batteries.

  • Do not charge batteries.

  • Do not burn batteries or heat them.

  • Never open, damage, or swallow batteries or allow them to enter the environment. They can contain toxic, environmentally harmful heavy metals.

  • Remove spent batteries from the product and dispose of them without delay.

  • Avoid storing, charging, and using in extreme temperatures and at extremely low atmospheric pressures (such as at high altitudes).

  • Ensure that batteries with damaged housings do not come into contact with water.

  • Keep batteries out of the reach of children.

  • Do not swallow batteries or button cells. Burning hazard from hazardous substances.

  • If the battery compartment will no longer close securely, stop using the product and keep it away from children.

Warning – batteries/button cells

  • This product contains button cells. If the button cell is swallowed, serious internal burns can occur within 2 hours and ultimately lead to death.
  • If you suspect that a button cell has been swallowed or is in any part of the body, seek medical attention immediately.
  • Keep new and used button cells out of the reach of children.

Functions

  • Easy to switch between up to 3 HDMI sources (e.g. Blu-ray/DVD player, receiver, computer, games console)
  • Quick and easy switching using a remote control
  • Automatic selection of the input source when switching on
  • No additional power supply is required, the power is supplied via the connected devices
  • Supports 3D and full HD resolution

Getting started and operation

  • Connect the source devices (e.g. Blu-ray/DVD player, receiver, computer, games console) to the HDMI inputs (input 1-3) using HDMI cables (not included in the delivery package).
  • The LED that corresponds to the active input (1) lights up.
  • Now connect your output device (e.g. TV, projector, monitor) to the HDMI outputs using HDMI cables (not included in the delivery package).
  • Turn on the connected devices. The power LED (2) lights up.
  • You can now select all inputs via the remote control (6).
  • It is also possible to select the source directly on the HDMI switching desk using the Select button (4).

Information about the power supply

  • In some cases, it may be necessary to provide the HDMI switching desk with additional power via the USB socket (5).
  • To do this, connect a micro USB / USB cable to the USB socket (5) and a free USB port on your TV or a USB power adapter (5 V /100 mA, not included in the delivery package).

Troubleshooting

Problem Solution
No picture • Ensure that all cables are correctly connected.

• Check to be sure that all devices are switched on.

• Make sure that the TV is set to the correct channel.

• Connect the HDMI switch to the USB power supply.

• In some cases, it may be necessary to provide the HDMI switching desk with additional power via the USB socket (5).

Poor picture, audio inter- ruptions| • Ensure that all cables are correctly connected.

• Try to connect the HDMI source directly to the output device. If nothing changes, you need to replace the source device.

• Use a 1.4 HDMI cable

• Your HDMI cable should not exceed a total length of 5 m.

• Switch all devices off and then on again.

---|---

Care and Maintenance

Note

  • Disconnect the device from the power supply before cleaning it or if it is not going to be used for a long period.
  • Only clean this product with a slightly damp, lint-free cloth, and do not use aggressive cleaning agents.

Warranty Disclaimer

  • Hama GmbH & Co. KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product, or failure to observe the operating instructions and/or safety notes.

Technical Data

**Connections**| 3 HDMI inputs

1 HDMI output

---|---
Supported resolutions| 480i/480p/576i/576p/720p/

1080i/1080p

HDCP version| Compatible with HDCP 1.4
Supported audio formats| LPCM, Dolby-AC3, DTS7.1, Dolby

True HD, DTS-HD master audio

**Source Selection| Manually via the button on the device, automatically when switching on or via the remote control
****
Power supply**| From source device (HDMI input) via USB (5 V/100 mA)

  • Hama GmbH & Co KG
  • 86652 Monheim/Germany
  • Service & Support
  • www.hama.com
  • +49 9091 502-0
  • All listed brands are trademarks of the corresponding companies.
  • Errors and omissions excepted, and subject to technical changes.
  • Our general terms of delivery and payment are applied.
  • 00121760/05.23

Documents / Resources

| hama H00121760 DMI Switch 3x1 [pdf] Instruction Manual
H00121760 DMI Switch 3x1, H00121760, DMI Switch 3x1, Switch 3x1
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals