hama 200125 USB OTG Hub Card Reader Instruction Manual
- June 4, 2024
- Hama
Table of Contents
hama 200125 USB OTG Hub Card Reader
Service& Support
- www.hama.com
- +49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
Package Contents
- USB OTG Hub/Card Reader
- USB adapter
- These operating instructions
Safety Notes
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not open the device or continue to operate it if it becomes damaged.
- Do not operate the product outside the power limits given in the specifications.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep this product, as all electrical products, out of the reach of children!
- Use the product for its intended purpose only.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- The product is intended for indoor use only.
- Do not use the product in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- Do not use the product in moist environments and avoid splashes.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Dispose of packaging material immediately according to locally applicable regulations.
Warning – Data Loss
- Ensure that data transfer is complete before you remove a storage medium from the device.
- If you do not do this, data may be lost.
Warning
- Find out the maximum output current capacity of the USB port on your device. To do this, consult the operating instructions or ask the manufacturer.
- Common values are 500 mA for USB-A 2.0, 900 mA for USB-A 3.0, and up to 3000 mA for USB-C.
- Ensure that the cumulative current draw of all USB devices connected to the hub/multiport adaptor does not exceed this value.
Startup and Operation
- Switch on your computer and boot the system.
- Connect the product to a free USB port on your computer.
- You do not have to install drivers; the computer will automatically recognise the product.
- If necessary, follow the instructions for your operating system.
- In order to use your devices, plug them into the product one after the other.
Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.
Technical Data
Operating voltage / current consumption| 5 V max. 500 mA
Compatibility| USB-A port USB-micro port
System requirements
| Windows 11 / 10 / 8 / 7 Mac OS 10.8 ≥
OTG: Android 4.0 ≥
The smartphone/ tablet must support the OTG technology
USB specification| USB 2.0
Note
- If there is interference or the product no longer responds, unplug the product, wait a few seconds and then plug it in again.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>