nVent ATE-180 Fixing Tape Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent ATE-180 Fixing Tape
Product Information
Specifications
| Catalog Number | Item Name | Width | Length | Suitable for Stainless Steel Pipes |
|---|---|---|---|---|
| 846243-000 | ATE-180 | 63.5 mm | 55 m | Yes |
| C77220-000 | GT-66 | 12.7 mm | 20 m | No |
| C77221-000 | GS-54 | 12.7 mm | 16.5 m | Yes |
Features
- Simple and fast to install
Warning
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
- Improper installation, misuse, misapplication, or another failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death, and/or void your warranty.
Contact Information
Please contact nVent customer service for further assistance:
North America
- Tel: +1.800.545.6258
- Fax: +1.800.527.5703
- Email: thermal.info@nvent.com
Europe, Middle East, Africa:
- Tel: +32.16.213.511
- Fax: +32.16.213.604
- Email: thermal.info@nvent.com
Asia Pacific
- Tel: +86.21.2412.1688
- Fax: +86.21.5426.3167
- Email: cn.thermal.info@nvent.com
Latin America
- Tel: +1.713.868.4800
- Fax: +1.713.868.2333
- Email: thermal.info@nvent.com
Brands
- Our powerful portfolio of brands: nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
Disclaimer
All trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
Product Usage Instructions
Installation
- Clean the surface where the fixing tape will be applied to ensure proper adhesion.
- Measure and cut the desired length of fixing tape using appropriate tools.
- Peel off the backing from the fixing tape to expose the adhesive side.
- Apply the adhesive side of the fixing tape firmly onto the desired surface, ensuring proper alignment.
- Press and hold the fixing tape firmly for a few seconds to ensure proper bonding.
Usage Precautions
- Only use the fixing tape as indicated in the product instruction sheets and training materials provided by nVent.
- Avoid using the fixing tape for applications it is not suitable for, as specified in the specifications section.
- Ensure that the surface where the fixing tape will be applied is clean and free of any dirt, oil, or debris.
- Do not stretch or overextend the fixing tape beyond its recommended limits.
- Store the fixing tape in a cool and dry place, away from direct sunlight and extreme temperatures.
Cleaning and Maintenance
To clean the surface where the fixing tape is applied, use a mild detergent
and a soft cloth. Avoid using abrasive cleaners or scrubbing tools that may
damage the fixing tape or the surface it is adhered.
Regularly inspect the fixing tape for any signs of wear or damage, and replace
if necessary.
Removal
- Gently peel off one end of the fixing tape from the surface.
- Slowly and carefully peel off the rest of the fixing tape while applying minimal force to avoid surface damage.
- If any residue remains on the surface after removing the fixing tape, use a residue remover or isopropyl alcohol to clean it.
FAQs
Q: Can the fixing tape be used on stainless steel pipes?
- A: Yes, the ATE-180 and GS-54 variants of the fixing tape are suitable for use on stainless steel pipes.
Q: What are the dimensions of the fixing tape?
- A: The ATE-180 variant has a width of 63.5 mm and a length of 55 m. The GT-66 and GS-54 variants have a width of 12.7 mm, with lengths of 20 m and 16.5 m, respectively.
Q: Where can I find the product instruction sheets?
- A: The product instruction sheets are available at www.nvent.com and can also be obtained from your nVent customer service representative.
- nVent RAYCHEM GT-66 is a glass installation tape to attach trace heating cables to pipes. For use on stainless steel, or when installation temperatures drop below 40 °F /5 C°, use GS-54 fixing tape.
- AT-180 / ATE-180 aluminum tape is used to attach heating cables and thermostat sensors to pipes and tanks.
FEATURES
Simple and fast to install
SPECIFICATIONS
Catalog Number| Item Name| Width| Length| Suitable for
Stainless Steel Pipes
---|---|---|---|---
846243-000| ATE-180|
63.5 mm| 55 m| Yes
C77220-000| GT-66| 12.7
mm| 20 m| No
C77221-000| GS-54| 12.7
mm| 16.5 m| Yes
- nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
- Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
North America
- Tel +1.800.545.6258 Fax +1.800.527.5703 thermal.info@nvent.com
- Our powerful portfolio of brands: nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER © 2023 nVent.
- All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
- nVent reserves the right to change specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>