nVent RBW402 LENTON Speed Sleeve Owner’s Manual

nVent RBW402 LENTON Speed Sleeve

Product Information

Specifications

• Catalog Number: RBW402
• Item Name: 145570
• Unit Weight: 0.450 kg
• Socket Width: 16 mm

Features

• Sized specifically to fit all nVent LENTON Speed Sleeve couplers
• Speeds installation
• Lightweight and durable

Additional Product Details

Standard wrenches and ratchets may be used. This tool is offered as a convenience.

Warning

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death, and/or void your warranty.

Contact Information

• Europe Netherlands: +31 800-0200135
• France: +33 800 901 793
• Germany: 800 1890272
• Other Countries: +31 13 5835404
• APAC Shanghai: +86 21 2412 1618/19
• Sydney: +61 2 9751 8500

Brands

• Our powerful portfolio of brands: nVent.com
  • CADDY
• ERICO
  • HOFFMAN
• RAYCHEM
  • SCHROFF
• TRACER

Disclaimer

nVent reserves the right to change specifications without notice.

Product Usage Instructions

Step 1: Preparing the Couplers

1. Ensure that the nVent LENTON Speed Sleeve couplers are clean and free from debris.
2. If necessary, apply a thin layer of lubricant to the inside of the couplers to facilitate installation.

Step 2: Inserting the Speed Sleeve

1. Take the nVent LENTON Speed Sleeve Installation Ratchet and ensure it is in the open position.
2. Insert one end of the speed sleeve into the coupler, making sure it is fully seated.
3. Hold the ratchet handle firmly and rotate it clockwise to engage the speed sleeve with the coupler threads.
4. Continue rotating the ratchet handle until the speed sleeve is fully tightened and secure.

Step 3: Verifying Installation

1. Inspect the installed speed sleeves to ensure they are properly aligned and fully tightened.
2. If any speed sleeves appear loose or misaligned, repeat the installation process.

Step 4: Completing the Installation

1. Once all speed sleeves are installed, proceed with the remaining steps of your specific application or project.

Frequently Asked Questions (FAQ)

Q: Can I use standard wrenches and ratchets with the nVent LENTON Speed Sleeve Installation Ratchet?

• A: Yes, standard wrenches and ratchets can be used with the nVent LENTON Speed Sleeve Installation Ratchet. The tool is designed to provide convenience and compatibility with commonly available tools.

Q: Where can I find the product instruction sheets and training materials?

• A: The product instruction sheets and training materials can be found on the event website at www.nvent.com. Alternatively, you can contact your nVent customer service representative for assistance.

Q: What should I do if the installed speed sleeves appear loose or misaligned?

• A: If any speed sleeves appear loose or misaligned, it is recommended to repeat the installation process. Ensure that the speed sleeves are properly aligned and fully tightened to ensure secure connections.

FEATURES

Sized specifically to fit all nVent LENTON Speed Sleeve couplers

Speeds installation

Lightweight and durable

SPECIFICATIONS

ADDITIONAL PRODUCT DETAILS

• Standard wrenches and ratchets may be used.
• This tool is offered as a convenience.

WARNING

• nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
• Instruction sheets are available at www.nvent.com and from your nVent customer service representative.
• Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.
• North America
  • +1.800.753.9221
• Option 1 – Customer Care Option 2 – Technical Support
  • Our powerful portfolio of brands:
  • nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER © 2023 nVent.
• All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates.
  • All other trademarks are the property of their respective owners.
• nVent reserves the right to change specifications without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>