Schneider Electric SR110KXIET Smart UPS Owner’s Manual

Table of Contents

Specifications

Product Name: Smart-UPS on-line SR1
Model: SR110KXIET
Power Rating: 10000VA / 8000W
Main Output Voltage: 230V
Other Output Voltage: 400V 3 phases, 220V, 240V
Output Connection Type: 4 IEC 60320 C13, 6 IEC Jumpers, 4 IEC 60320 C19
Form Factor: 6U
Nominal Output Voltage Configurable : 220V, 230V, or 240V
Rated Power: 869W
Nominal Battery Capacity: 1920VAh
Battery Expansion Options:
- SURT192XLBP 1 – 3840 VAh
- SURT192XLBP 2 – 5760 VAh
- SURT192XLBP 3 – 7680 VAh
- SURT192XLBP 4 – 9600 VAh
- SURT192XLBP 5 – 11520 VAh
- SURT192XLBP 6 – 13440 VAh
- SURT192XLBP 7 – 15360 VAh
- SURT192XLBP 10 – 21120 VAh
Lead Time: Jun 15, 2023
Number of Available Power Module Slots: 0
Number of Filled Power Module Slots: 0
Redundancy: No
Input Voltage Range: 160-280V
Output Voltage Regulation: Less than 5% at full load
Certifications: C-Tick, CE, GOST, VDE
Product Standards: EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018
Communication and Management: Available Alarm Slot
Surge Protection and Filtering: Yes
Packaging Details:
- Package Type : PCE 1
- Number of Products in Packaging: 1
- Packaging Height: 55.2 cm
- Packaging Width: 99.1 cm
- Packaging Length: 59.7 cm
- Packaging Weight: 129.09 kg
Contractual Warranty: 3 years

Installation

To install the Smart-UPS online SR1, follow these steps:

Choose a suitable location for the UPS, ensuring it is placed on a stable surface.
Connect the input power cord to the UPS input power connector.
Connect the output devices to the appropriate output connectors on the UPS.
If required, connect additional battery expansion modules to the UPS to increase battery capacity.
Connect the UPS to a grounded AC power source.

Setup

The Smart-UPS on-line SR1 allows you to configure the following settings:

Nominal Output Voltage: You can configure the nominal output voltage to be either 220V, 230V, or 240V.
Battery Expansion: If you need additional battery capacity, you can install compatible battery expansion modules into the available slots on the UPS.

Operation

To operate the Smart-UPS online SR1, follow these guidelines:

Ensure that the UPS is connected to a power source and the input power cord is properly plugged in.
Switch on the UPS using the power button located on the front panel.
Monitor the UPS status indicators to ensure proper functioning.
In case of a power outage, the UPS will automatically switch to battery power to provide continuous power supply to connected devices.
If necessary, use the available alarm slot for monitoring and management purposes.

Maintenance

To ensure optimal performance and longevity of the Smart-UPS on-line SR1, follow these maintenance guidelines:

FAQs

Q: Can I configure the output voltage of the Smart-UPS on-line SR1?

A: Yes, you can configure the nominal output voltage to be either 220V, 230V, or 240V.

Q: Can I expand the battery capacity of the Smart-UPS online SR1?

A: Yes, you can install compatible battery expansion modules into the available slots on the UPS to increase battery capacity.

Q: How long is the contractual warranty for the Smart-UPS online SR1?

Presentation Proven Industrial UPS power protection for control applications and harsh environments.
Lead time Generally available in stock

Main

Main input voltage 230 V 400 V 3 phases
Other input voltage 220 V 240V
Main output voltage 230 V
Other output voltage 220 V 240V
Rated power in W 8000 W
Rated power in VA 10000 VA
Output connection type 4 IEC 60320 C13 6 CEI Jumpers 4 IEC 60320 C19
Type of output connectors Wiring on 3-wire terminal block (H + neutral + earth) 1
Number of 6U rack units
Battery Type Sealed Lead Acid Battery
Equipment supplied CD with software
Maintenance manual RS-232 cable for Smart-UPS connection
User manual
Web/SNMP management card

Pre-installed batteries 4
Empty battery slot 0
Battery recharge time 2.2 H
Number of spare battery quantities 2
Additional information Nominal output voltage configurable in 220, 230, or 240
Battery Charging Power (Watts) 869 W nominal
Battery power in VAH 1920 VAh runtime
Battery life 3…5 year(s)
Option battery SURT192XLBP 1 3840 VAh
- SURT192XLBP 2 5760 VAh
- SURT192XLBP 3 7680 VAh
- SURT192XLBP 4 9600 VAh
- SURT192XLBP 5 11520 VAh
- SURT192XLBP 6 13440 VAh
- SURT192XLBP 7 15360 VAh
- SURT192XLBP 10 21120 VAh

Physical

Entrance

Network frequency 50/60 Hz +/- 5 Hz automatic detection
Number of input connectors 1 wiring on 3-wire terminal block (1 phase + neutral + earth)
1 wiring on 5-cable terminal block (3PH + N + G)
Input voltage limits 160 …280 V
Input harmonic distortion rate Less than 5% at full load

Exit

Max configurable power (Watts) 8000 W
Harmonic distortion Less than 3%
Output frequency (mains sync) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 sync to mains
Crest factor 3:1
Type UPS On-line Double Conversion
Waveform type Sine wave
Bypass type Internal bypass (automatic and manual)
Max configurable power (VA) 10000 VA