opticis SVDF-200 Video Composite Video to 1 Fiber User Manual
- June 16, 2024
- opticis
Table of Contents
opticis SVDF-200 Video Composite Video to 1 Fiber
Product Information
Specifications
- Product Name: S-video/Composite video to 1-fiber DVI converter
- Model: SVDF-200
- Input: S-video or Composite video
- Output: SXGA (1280×1024), 60Hz DVI optical signal
- Transmission Distance: Up to 500 meters (1,640 feet)
- Fiber Type: SC multi-mode
- Power Adapter: +5V, 3A (Locking type)
Product Description
The SVDF-200 is a component video to 1-fiber DVI converter. It receives SD
format S-video/Composite video and converts it to SXGA (1280×1024), 60Hz DVI
optical signal. The converted signal can be transmitted up to 500 meters
(1,640 feet) over one (1) SC multi-mode fiber. To recover the 1-fiber DVI
signal to electrical DVI, the OPTICIS 1-fiber DVI receiver, DVFX-100-R, is
used as a pair.
Shipping Group
- SVDF-200, Component video to 1-fiber DVI converter: One (1) unit
- AC/DC power adapter: One (1) unit of +5V, 3A (Locking type)
- User’s Manual
- Option Product: Mounting bracket
System Requirements for Setup
To set up the SVDF-200, you will need the following:
- S-video/Composite video sources such as DVD player or camcorder
- No special requirements for video sources
Installation
Important: Please follow the installation procedure below to ensure proper operation.
Step 1: Unpacking
Carefully unpack the contents of the shipping group.
Step 2: Power Connection
Plug and fasten the 5V power adapter to the +5V DC jack on the rear side of
the converter. Ensure that the Power LED is ON (Blue).
Step 3: Video Source Connection
Connect the S-video or Component video source to the SVDF-200 using a mini-DIN
or RCA cable. Make sure there are firm connections between the video source
and the input port of the converter (S-VIDEO IN and COMPOSITE IN). If the
connected video source is active, the status LED (Blue) will turn on.
Note 1: The SVDF-200 is designed to accept the first incoming video inputs. If you connect a Composite video output to the SVDF-200 input port, it will work as a composite video to 1-fiber DVI converter, and vice versa.
Step 4: Fiber Connection
Connect the OPTICAL OUT of SVDF-200 to the 1-fiber DVI receiver,DVFX-100-R, using a multimode SC-SC optical fiber.
Step 5: Display Connection
Plug the DVFX-100-R into the DVI input port of the display.
Step 6: On-Site Monitoring (Optional)
If you need on-site monitoring, connect the S-VIDEO OUT or COMPOSITE OUT on the front side of the converter to a dedicated local display using a mini-DIN or RCA cable.
Note 2: As the same concept as Note 1, if you connect an S-video output to the SVDF-200 input port, it will work as an S-video to 1-fiber DVI converter, and only the S-VIDEO OUT port would be activated.
Note
- The maximum extension length by multi-mode fiber is 500 meters.
- It is recommended NOT to use any intermediate cable or adapter in between to avoid undesirable performance degradation.
Troubleshooting, Maintenance, Technical Support
If you encounter any issues with the SVDF-200, refer to the troubleshooting
section in the user manual for assistance. For maintenance and technical
support, please contact our customer support team.
Warranty Information
Please refer to the warranty information section in the user manual for
details about the product warranty.
Pictorials
Refer to the pictorials section in the user manual for visual
representations of the installation and setup process.
FAQ
Q: The display shows only a black screen. What should I do?
A: Please follow these troubleshooting steps:
- Ensure that all plugs and jacks used by external power supplies (both Opticis and others) are firmly connected. Check if the Power and status LED are ON.
- Ensure that the video ports are firmly plugged into the source and display.
- Check if the converter and receiver modules are plugged correctly into the source and display, respectively.
- Make sure the source and display are powered on and properly booted.
S-video/Composite video to 1-fiber DVI converter,SVDF-200
Welcome!
Congratulations on your purchase of the S-video/Composite video to 1-fiber DVI
converter, SVDF-200. This manual contains information that will assist you in
installing and operating the product.
Product Description
The SVDF-200, Component video to 1-fiber DVI converter receives SD format S-video/Composite video and converts to SXGA (1280×1024), 60Hz DVI optical signal and transmits up to 500 meters (1,640feet) over one (1) SC multi-mode fibers. OPTICIS 1-fiber DVI receiver, DVFX-100-R is used as a pair to recover 1 fiber DVI to electrical DVI.
Shipping Group
- SVDF-200, Component video to 1-fiber DVI converter: One (1) unit
- AC/DC power adapter: One (1) unit of +5V, 3A (Locking type)
- User’s Manual
- Option Product: Mounting bracket
System Requirements for Setup
- Hardware requirements
- You have to have S-video/Composite video sources such as DVD player or camcorder.
- No special requirements for video sources
Installation
Important: Please keep the installation procedure below. Improper or no operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Plug and fasten the 5V power adapters to the +5V DC jack on the rear side of
converter. Ensure the Power LED ON (Blue).
Step 3
Connect the S-video or Component video source to SVDF-200 over mini-DIN or RCA
cable. Please make sure the firm connections between video source and input
port of converter (S-VIDEO IN and COMPOSITE IN). If the connected video source
is active, status LED (Blue) will be turned on.
[Note 1] SVDF-200 is designed to accept the first incoming video inputs. If
the user connect Composite video output to SVDF-200 input port, it will work
as composite video to 1-fiber DVI converter and vice versa.
Step 4
Connect the OPTICAL OUT to 1-fibe DVI receiver, DVFX-100-R over multimode SC-
SC optical fiber.
Step 5
Plug DVFX-100-R to DVI input port of display.
Step 6
If you need on-site monitoring, connect S-VIDEO OUT or COMPOSITE OUT on the
front side of converter to dedicated local display over mini-DIN or RCA cable.
[ Note 2 ] As the same concept as Note 1, if f the user connect S-video
output to SVDF-200 input port, it will work as S-video to 1-fiber DVI
converter and only S-VIDEO OUT port would be activated.
Note1: The maximum extension length by multi-mode fiber is 500 meters.
Note2: Be recommended NOT to use any intermediate cable or adapter in between to avoid undesirable performance degradation.
Troubleshooting
The display shows only black screen.
- Ensure that all plugs and jacks used by external power supplies (both Opticis and others) are firmly connected. Ensure that the Power and status LED ON.
- Ensure that the video ports are firmly plugged in to the source and display.
- Ensure that the converter and receiver modules plugged correctly to the source and display, respectively.
- Check if the source and display are powered on and properly booted.
Screen is distorted or displays noises.
- Check if the graphic resolution is properly set. Go to the display properties of Windows and tap the settings.
- Reset the system. Disconnect and reconnect the optical fiber or 5V power adapters.
- Ensure that the input resolution is SD format (NTSC, PAL)
Maintenance
No special maintenance is required for the converter and power adapters.
Ensure that the converter and power adapters are stored or used in a benign
environment free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to
VigilLink.
Technical Support and Service
General Inquires: info@vigillink.com
Tech Support: support@vigillink.com
Visit us at www.vigillink.com to learn more about Opticis products.
Product Specifications
SVDF-200, Component video to 1-fiber DVI converter
- Extension limit: 500 meters (1,640 feet) for SXGA (1280×1024), 60Hz refresh rate.
- Graphic transmission bandwidth: Supports SXGA (1280×1024), 60Hz, or 1.085Gbps bandwidth per graphic channel.
- Supporting resolution: 480i, 576i.
- Fiber-optic connection: SVDF-200 has one (1) SC receptacles so as to be connected with one (1) SC multi-mode fiber, having 62.5 (50) / 125m core.
- Dimensions (WDH): 104 x 112 x 28mm
- Environmental Specifications
- Operating temperature: 0°C to 50°C
- Storage temperature: – 30°C to 70°C
- Humidity: 10% to 85%
AC/DC Power Adapter
- Power Input: AC 100-240V, 50/60Hz 0.1A
- Power Output: +5 V, 3A SMPS DC-power Adapter
- Cord DC Jack: Core is 5 V and outer is GND.
Warranty Information
1 (One) Year Warranty
Opticis warrants this SVDF-200 to be free from defects in workmanship and m
aterials, under normal use and service, for a period of one (1) year from the
date of purchase from Opticis or its authorized resellers.
If a product does not work as warranted during the applicable warranty period,
Opticis shall, at its option and expense, repair the defective product or
part, d eliver to customer an equivalent product or part to replace the
defective item or refund to customer the purchase price paid for the defective
product.
All products that are replaced will become the property of Opticis.
Replacement products may be new or reconditioned.
Any replaced or repaired product or part has a ninety (90) day warranty or the
reminder of the initial warranty period, whichever is longer.
Opticis shall not be responsible for any software, firmware, information, or
me mory data of customer contained in, stored on, or integrated with any
product s returned to Opticis for repair under warranty or not.
Warranty Limitation and Exclusion
Opticis shall have no further obligation under the foregoing limited warranty
if the product has been damaged due to abuse, misuse, neglect, accident,
unusual physical or electrical stress, unauthorized modifications, tampering,
alterations, or service other than by Opticis or its authorized agents, causes
other than from ordinary use or failure to properly use the product in the
application for which said product is intended.
Dispose of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate
systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
© Copyright 2023 VigilLink. All Rights Reserved.
Trusted Partner of Opticis for the Americas
46 Corporate Park, #130. Irvine, CA 92606
T: 949.701.4742 F: 949.701.4965
E: info@vigillink.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>