Shark NV392 Series Navigator Lift-Away Pro Upright Vacuum User Manual
- June 9, 2024
- Shark
Table of Contents
Shark NV392 Series Navigator Lift-Away Pro Upright Vacuum User Manual
NV392 SERIES
QUICK START GUIDE
[ Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.]
WHAT’S INSIDE
A. Motorized Floor Nozzle
B. Wand
C. Handle
D. Crevice Tool
E. Upholstery Tool
ASSEMBLY
MAINTENANCE
Empty dust cup after each use
Cleaning Filters
TIP :
To keep suction strong, rinse pre-motor filters with water only every 3
months, and the HEPA filter once a year.
Allow filters to air-dry completely for at least 24 hours before reinstalling.
between washes.
Pre-Motor (foam and felt):
With the dust cup removed, take out the foam and felt filters and rinse them
with water. Between washes, tap loose dirt off filters when needed.
Post-Motor (HEPA):
To access the HEPA filter, pull the tab under the filter cover, and lift off
the cover. Remove and rinse the HEPA filter.
Easy brushroll maintenance
Use a coin to open the 2 locks on the bottom of the floor nozzle.
Remove any string, carpet fibers, or hair that may be wrapped around the brushroll.
USING YOUR VACUUM IN LIFT-AWAY® MODE
For questions or to register your product visit us online at sharkclean.com
©2019 SharkNinja Operating LLC. LIFT-AWAY and SHARK are registered trademarks of SharkNinja Operating LLC. NAVIGATOR is a trademark of SharkNinja Operating LLC.
NV392_QSG_REV_Mv6
DOWNLOAD
Shark NV392 Series Navigator Lift-Away Pro Upright Vacuum:
Quick Start Guide – [Download PDF]
Owner’s Guide – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>