AKIRES JDAC75 Air Cooler Instruction Manual
- June 16, 2024
- AKIRES
Table of Contents
**AKIRES JDAC75 Air Cooler Instruction Manual
**
Dear customer:
First of all, thank you for purchasing and using our air cooler.
In order for you to use our products better, please read this instruction
manual carefully before use, and for the safety of you and your family, please
be sure to abide by the relevant regulations in the manual.
In order to protect your legitimate rights and interests, please keep the
manual, warranty card and purchase invoice properly.
If you have any questions during use, please contact us in time. Thank you
again for choosing our products, he will make your life more comfortable and
warm!
Schematic diagram of product parts
MECHANICAL TYPE
DIGITAL TYPE
Technical parameter
| Mooel no. | RATED VOLTAGE | RATED FREQLIENCY | RATED POWER |
|---|---|---|---|
| IDACTS | 120V- | 60Hz | 130W |
| JDACTSR | 1200- | b0Hz | 130W |
Motes: If the above parameters are changed, please refer to the nameplate of product.
Product circuit diagram
MECHANICAL TYPE
DIGITAL TYPE
Instructions for use of the operation panel
Electronic panel operation
After insarting the power plug into the power socket, you will hear & “heep”
sound from the buzzer, and the whole machine will enter the standby state.
On | off (power) button: press the “on / off (power}” button for the first
time, the product will enter the power on state, the air cooler will display
the low-speed working state, and the display screen will display the current
ambient temperature (in Fahrenheit).
-
COOL air button: Press this button once, the corresponding icon an the panel will light up and the cold air function will be turned on. Press this button again to turn off the cold air function, which can be selected at will.
{Note : The cold air function of this machine is prohibited to use without water) -
SWING air button: Press this button after power on, the corresponding icon on the panel lights up, and the vertical louvers start to swing feft and right to supply air; press it again to turn off this function, and the air supply state is directional air supply at this time, {Maote: Moving the horizontal louvers either up or down manually can also change the wind direction),
-
Fan SPEED button: low-grade wind when starting up; press the “wind speed” key for the first time to enter the mid-grade wind operation, press it again to enter the high-grade wind operation; press it again to enter the low-grade wind working state again, and cycle in turn,.
-
Wind MODE button : The default is normal wind when power on, the corresponding normal wind light is on, press the “Wind mode” key ance to blow the natural wind, the corresponding natural wind light is on, it becomes “Natural wind”, and then press “Wind mode” again, blow “sleep wind”, the correspanding natural wind light is on, press it again ta return to normal wind, and cycle In turn; the size and strength of normal wind remain unchanged, while the soft and comfortable imitation natural wind, the set wind speed is used as a rhythm Sexual changes, suddenly strong and weak, such as exposure to the breeze of nature. In additicn to the variable wind speed, the sleep wind also has the function of automatically lowering the gear every half an hour, which meets your health needs during sleep.
-
TIMER button: When the timer light is not on, press the “timing” button continuously, and the cumulative adjustment can reach 12 hours. When the set shutdown time is raached, the machine stops working.
Mechanical panel operation
-
Instructions for speed regulation: Please select the wind speed you need on the speed butten of the operation panel, high, medium, low, and off.
-
Instructions for use of the swing switch: Press the button of the swing switch down to start, and the page swing starts to work, Press the swing switch again, and the button bounces up, and the swing function stops working.
(Note: The upper and lower swing louvers are manually adjusted to control the wind direction) -
Instructions for use of the cold air function: Press the cold air switch button down to start, the water pump is turned on, and the humidification and refrigeration function is performed.
Fress the cold air switch again, and the button bounces up, the water pump stops working, and the humidification and refrigeration function |s turned off.
Operation and usage
-
Open the box and take out the machine, and check whether the items in the box are consistent with those described in the packing list,
-
Installation of casters:
Installation method: take out the whole machine and place it on a flat surface upside down, and insert the wheels into the bottom holes.
Once installed in place, use the casters on the ground. -
The machine should be placed horizontally, and be careful not to tilt during use, Before use, check whether the power supply of the socket is consistent with the parameters on the nameplate of the machine,
-
This machine cannot be used in ultra-high temperature or low temperature places.
In hot summer, the water in the water tank is easy to deteriorate and produce peculiar smell and breed bacteria, Please pay attention to replace the water in the water tank in time. -
Add water: Gently open the lid with your hands (as shown in the picture) ‘When adding water, observe the water level through the water level window and control the amount of water added.
Please pay attention to the following points when adding water:- For the health of you and your family, clean tap water must be used, and the power plug should be unplugged before adding water.
- Do not splash water on the electric machine and its surrounding parts to avoid electric leakage accidents.
- Just add water to the “highest water level” water line, otherwise the water will overflow from the machine.
-
Use ofiice erystals: The product is delivered with two ice crystal boxes, which contain a certain
amount of ice crystals, After the water tank is pushed into place, power on and use.-
Note: The ice crystal box should be placed and removed gently to prevent damage to thewater circulation systern (as shown in Figure 1).The two lce crystals can be used alternately to ensure a long time of humidification and refrigeration in hot summer.
-
Note: 1. Do not eat the ice crystals in the box! Do not use the ice crystal box as a toy for children to prevent accidental ingestion!2.1t is best to freeze for about 6 hours for the first use, and then freeze until itfreezes and hardens.Figure 2.
-
-
Open the air outlet: Before starting the machine, be sure to manually open the horizontal louvers (as shown in the figure below) and adjust it to the desired position,
Use your fingers to buckle up the tuyere horizontal louvers from here, and adjust the petition of the tuyere up and down.
-
When packaging, storage or transportation is required, it should be drained and then
ventllated at room temperature for a period of time, so that the wet curtain paper in the bady is
completely dry before packaging to prevent peculiar smell due to humidity. The whole machine is
covered with plastic bags during storage, and put it in a box for reuse. -
Cleaning: After the machine has been running for a long time, the water tank, air inlet and
wet curtain evaporator will be blocked by dust and sundries and affect the air velume and cooling
effect. It is recommended to clean the water tank, air inlet and wet curtain evaporator once a
week. -
Cleaning method:
-
Before cleaning, unplug the power plug from the power socket, and make sure that the fan is disconnectad from the power supply before removing the protective cover.
-
When the sliding distance of the water tank is dragged outward, it is appropriate that the rear plane of the water tank is 8CM from the back of the bedy.
If the sliding distance of the water tank is too long, the water circulation system may be damaged.
After the water tank is cleaned, re-install the water tank into the machine.
At this time, the cold air function can be used normally.
Otherwise, please check the limit of the water circulation system.
Clean the filter with cleaning water and a brush . -
Remove the filter screen and wet curtain evaporator on the back of the body by hand, rinse the sundries and dust on the wet curtain evaporator with clean water.
Use a soft brush to clean the dust on the filter screen, then rinse with water, and after drying, then put it back in the original place according to the original disassembly methaod.
Washing water flushes wet pad evaporator -
When using, the wet curtain evaporator must be placed in the designated position in the machine, otherwise it will affect the normal operation and service life of the machine.
-
When moving, first check whether there is water in the water tank.
If there is water, please drain the water in the water tank first .
(Note : When there is water in the water tank, it is not allowed to tilt and pull the machine to prevent the water in the water tank from overflowing).
Precautions for safe use
-
Please use normal power supply to ensure safety.
-
After the machine is filled with water, place or move it without tilting or colliding it.
When moving the machine, please push it slowly to prevent the water from overflowing.
Using this machine is strictly prohibited to overturn and place it on a sloping ground to prevent accidents, -
Do not place heavy objects on the top of the machine, and it is strictly forbidden to cover the air outlet, {Figure 4) When using, there should be no physical shielding within one meter in front of and behind the machine to facilitate smooth air.
-
Do not place the machine in high temperature and ultra-low temperature places.
The water in the water sawing tank is easy to deteriorate and produce peculiar smell in hot summer.
Please pay attention to updating the water, -
Mote: It is strictly forbidden to use water to shower the machine.
-
Besure to manually open the horizontal louvers upwards before starting the machine.
-
When it needs to be packaged and stored, it should be run with normal air for a period of time after draining the water to make the evaporator completely dry before packaging to prevent the evaporator from producing peculiar smell due to the wet surface,
-
When the machine is not used for a long time, please pull out the power plug to avoid damage to the machine,
-
Ifthe power cord s damaged, in order to avoid danger, it must be replaced by professionals from the manufacturer, its maintenance department or similar departments.
-
This machine has a strong humidification effect. Please do not use it in a closed environment. If you use it in a closed environment, please turn off the cold air function.
-
When the water level is lower than the minimum water level line, please add water in time.
-
This appliance is not intended to be used by persons {including children) who are physically weak, sluggish or mentally handicapped, unless they are used safely under the guidance or assistance of the person respansible for their safety.
-
Children should be supervised to protect them from playing with appliances,
-
Mote: Before removing the protective cover, it must be disconnected from the power supply.
-
Mote: Please turn off the machine and pull out the power plug when unattended.
Storage and Maintenance
- When notin use, first turn off the power and pull out the plug.
- For cleaning and maintenance, make sure that the fan is disconnected from the power supply before removing the protective cover!
- After maintenance and cleaning, please put all parts into the packing box according to the original packing order.
- Storeitin a place without direct sunlight and less humidity.
- Please do not place it near fire or flammable materials.
- When cleaning, please wipe with a soft cloth soaked in water or kitchen detergent, and then wipe with a soft dry cloth; do not use hard objects to wipe the surface.
- Do not use Tianna water, alcohol, alkaline detergent, decontamination powder, volatile agent, toluene or chemical rags for cleaning to prevent the cooling fan from discoloration and corrosion,
- Ifthereis aslight abnormal sound or smell when using it for the first time, it is a normal phenomenon, please use it with confidence.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>