Shenzhen Tangzao Technology BCS Car Wireless Charger User Manual
- June 6, 2024
- Shenzhen Tangzao Technology
Table of Contents
Shenzhen Tangzao Technology BCS Car Wireless Charger
Package Contents
- Wireless Charger x 1
- Anti-slip Mat x 1
- Car Charger x 1
- Type-C USB Cable x 1
- User Manual x 1
Lamp Status Description
| Item | Status | Description |
|---|---|---|
| Switch | Blue Light On | Power On |
| Blue Light Off | Power Off | |
| LED Indicator Light | Green Light On | Charging |
| Green Light Flashing | Error/FOD | |
| White Light On | Fully Charged |
Specification
| Product Name | Car Wireless Charger |
|---|---|
| Model | BCS |
| Input | 5V 2A 9V 1.7A |
| Output | 5W,7.5W, 10W |
| Working Frequency | 115KHz-205KHz |
| Charging Efficiency | 78% Max |
| Coil Quantity | 1 |
Installation Steps
-
Take out the rubber pad of the storage box under the central control panel, turn up the cigarette lighter cover and rotate it to make the “12V” characters upside down.
-
Insert one end of the Type-C USB Cable into the Wireless Charger and the other end into the USB interface of the Car Charger.
-
Turn up the cigarette lighter cover, insert the Car Charger with the head of the line facing to the left. Install the Wireless Charger, slightly move and adjust to fit with the car.
-
Turn on the switch of the Wireless Charger ,and then place the phone compatible with QI standard on it to be charged.
FCC ID: 2AS5P-BCS
FCC WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines.
This equipment should be installed and operated with minimum distance between
20cm the radiator your body: Use only the supplied antenna.
If you are not satisfied with our products, please reach out to us, we would
love the opportunity to make it right, simply send us a message. If you are
happy with our products, sharing your experience will greatly help other
owners find the right accessories for their cars and also inspire us to design
the best products for the community.
Again, we appreciate your trust and support to CarQiWireless.