MITSUBISHI ELECTRIC MFZ-KT25VG Floor Type Air Conditioners Instruction Manual

FLOOR-TYPE AIR CONDITIONERS
INDOOR UNIT
MFZ-KT25VG MFZ-KT35VG MFZ-KT50VG MFZ-KT60VG

OPERATING INSTRUCTIONS
Manual Download
http://www.mitsubishielectric.com/ldg/ibim/

MFZ-KT25VG Floor Type Air Conditioners

Go to the above website to download manuals, select model name, then choose language.

SAFETY PRECAUTIONS

Meanings of symbols displayed on indoor unit and/or outdoor unit

| WARNING
(Risk of fi re)| This unit uses a fl ammable refrigerant.
If refrigerant leaks and comes in contact with fi re or heating part, it will create harmful gas and there is risk of fi re.
---|---|---
| Read the OPERATING INSTRUCTIONS carefully before operation.
| Service personnel are required to carefully read the OPERATING INSTRUCTIONS and INSTALLATION MANUAL before operation.
| Further information is available in the OPERATING INSTRUCTIONS, INSTALLATION MANUAL, and the like.

• Since rotating parts and parts which could cause an electric shock are used in this product, be sure to read these “Safety Precautions” before use.
• Since the cautionary items shown here are important for safety, be sure to observe them.
• After reading this manual, keep it together with the installation manual in a handy place for easy reference.

Marks and their meanings
WARNING : Incorrect handling could cause serious hazard, such asdeath, serious injury, etc. with a high probability.
CAUTION : Incorrect handling could cause serious hazard depending on the conditions.

Meanings of symbols used in this manual

|  : Be sure not to do.
---|---
|  : Be sure to follow the instruction.
|  : Never insert your fi nger or stick, etc.
|  : Never step onto the indoor/outdoor unit and do not put anything on them.
|  : Danger of electric shock. Be careful.
|  : Be sure to disconnect the power supply plug from the power outlet.
|  : Be sure to shut off the power.
|  : Risk of fi re.

WARNING

| Do not connect the power cord to an intermediate point, use an extension cord, or connect multiple devices to a single AC  outlet.
• This may cause overheating, fi re, or electric shock.
---|---
Make sure the power plug is free of dirt and insert it securely into the outlet.
•  A dirty plug may cause fi re or electric shock.
Do not bundle, pull, damage, or modify the power cord, and do not apply heat or place heavy objects on it.
• This may cause fi re or electric shock.
Do not turn the breaker OFF/ON or disconnect/connect the power plug during operation.
• This may create sparks, which can cause fi re.
• After the indoor unit is switched OFF with the remote controller, make sure to turn the breaker OFF or disconnect the power plug.
Do not expose your body directly to cool air for a prolonged length of time.
• This could be detrimental to your health.
The unit should not be installed, relocated, disassembled, altered, or repaired by the user.
• An improperly handled air conditioner may cause fi re, electric shock, injury, or water leakage, etc. Consult your dealer.
• If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
When installing, relocating, or servicing the unit, make sure that no substance other than the specifi ed refrigerant (R32/
R410A) enters the refrigerant circuit.
• Any presence of foreign substance such as air can cause abnormal pressure rise and may result in explosion or injury.
• The use of any refrigerant other than that specifi ed for the system will cause mechanical failure, system malfunction, or  unit breakdown. In the worst case, this could lead to a serious impediment to securing product safety.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they  have been given supervision or instruction concerning use of  the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
| Do not turn the breaker OFF except the case of burning smell, or when performing maintenance or inspection.
• The refrigerant leakage cannot be detected, and this may cause a fire.
Do not install the unit in a place where smoke, gas, orchemicals may fill.
• Do not use any gas equipment for propane, butane ormethane, sprays such as bug killer, and paint etc., near by the  indoor unit.
• The refrigerant sensor reacts to it and displays an error. Thismay cause the unit not to operate.
| (Procedure in case of refrigerant leakage)
If the refrigerant leaks, extinguish a fi re such as a heater, and ventilate the room adequately by opening the window.
• Then contact your dealer.
• The indoor unit spreads the refrigerant by FAN mode to
prevent a fi re. Do not turn the breaker OFF during this situation.
| Do not insert your fi nger, a stick, or other objects into the air inlet or outlet.
• This may cause injury, since the fan inside rotates at high speeds during operation.
| In case of an abnormal condition (such as a burning smell),
stop the air conditioner and disconnect the power plug or
turn the breaker OFF.
• A continued operation in the abnormal state may cause a
malfunction, fi re, or electric shock. In this case, consult your
dealer.
| When the air conditioner does not cool or heat, there is a possibility of refrigerant leakage. If any refrigerant leakage is  found, ventilate the room well and consult your dealer immediately. Do not turn the breaker OFF. If a repair involves  recharging the unit with refrigerant, ask the service technician for details.
• The refrigerant used in the air conditioner is not harmful.
Normally, it does not leak. However, if refrigerant leaks and comes in contact with fi re or heating part of such a fan heater,  kerosene heater, or cooking stove, it will create harmful gas and there is risk of fi re.
The user should never attempt to wash the inside of the indoor unit. Should the inside of the unit require cleaning, contact  your dealer.
• Unsuitable detergent may cause damage to plastic material inside the unit, which may result in water leakage. Should detergent come in contact with electrical parts or the motor, it will result in a malfunction, smoke, or fi re.
• The appliance shall be stored in a room without continuously operating ignition sources (for example: open fl ames, an operating gas appliance or an operating electric heater).
• Be aware that refrigerants may not contain an odour.
• Do not use means to accelerate the defrosting process or to clean the appliance, other than those recommended by the  manufacturer.
• Do not pierce or burn.
This unit should be installed in rooms which exceed the floor space specifi ed in outdoor unit installation manual.
• Refer to outdoor unit installation manual.
| This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial  use by laypersons.

To use this unit correctly and safely, be sure to read these operating instructions before use.

CAUTION

| Do not touch the air inlet or the aluminum fi ns of the indoor/ outdoor unit.
• This may cause injury.
---|---
Do not use insecticides or fl ammable sprays on the unit.
• This may cause a fi re or deformation of the unit.
Do not expose pets or houseplants to direct airfl ow.
• This may cause injury to the pets or plants.
Do not place other electric appliances or furniture under the indoor/outdoor unit.
• Water may drip down from the unit, which may cause damage or malfunction.
Do not leave the unit on a damaged installation stand.
• The unit may fall and cause injury.
Do not step on an unstable bench to operate or clean the unit.
• This may cause injury if you fall down.
Do not pull the power cord.
• This may cause a portion of the core wire to break, which may cause overheating or fi re.
Do not charge or disassemble the batteries, and do not throw them into a fi re.
• This may cause the batteries to leak, or cause a fi re orexplosion.
Do not operate the unit for more than 4 hours at high humidity (80% RH or more) and/or with windows or outside door left open.
• This may cause the water condensation in the air conditioner, which may drip down, wetting or damaging the furniture.
• The water condensation in the air conditioner may contribute to growth of fungi, such as mold.
Do not use the unit for special purposes, such as storing food, raising animals, growing plants, or preserving precision devices or art objects.
• This may cause deterioration of quality, or harm to animals and plants.
Do not expose combustion appliances to direct airfl ow.
• This may cause incomplete combustion.
Never put batteries in your mouth for any reason to avoid accidental ingestion.
• Battery ingestion may cause choking and/or poisoning.
| Before cleaning the unit, switch it OFF and disconnect the power plug or turn the breaker OFF.
• This may cause injury, since the fan inside rotates at high speeds during operation.
Replace all batteries of the remote controller with new ones of the same type.
• Using an old battery together with a new one may cause overheating, leakage, or explosion.
If the battery fl uid comes in contact with your skin orclothes, wash them thoroughly with clean water.
• If the battery fl uid comes in contact with your eyes, wash themthoroughly with clean water and immediately seek medical attention.
Ensure that the area is well-ventilated when the unit isoperated together with a combustion appliance.
• Inadequate ventilation may cause oxygen starvation.
| Turn the breaker OFF when you hear thunder and there is a possibility of a lightning strike.
• The unit may be damaged if lightning strikes.
After the air conditioner is used for several seasons, perform inspection and maintenance in addition to normal cleaning.
• Dirt or dust in the unit may create an unpleasant odor, contribute to growth of fungi, such as mold, or clog the drain passage, and  cause water to leak from the indoor unit.
Consult your dealer for inspection and maintenance, which require specialized knowledge and skills.
| Do not operate switches with wet hands.
• This may cause electric shock.
Do not clean the air conditioner with water or place an object that contains water, such as a fl ower vase, on it.
• This may cause fi re or electric shock.
| Do not step on or place any object on the outdoor unit.
• This may cause injury if you or the object falls down.

IMPORTANT
Dirty fi lters cause condensation in the air conditioner which will contribute to the growth of fungi such as mold. It is therefore recommended to clean air filters every 2 weeks.

For installation

WARNING

| Consult your dealer for installing the air conditioner.
• It should not be installed by the user since installation requires specialized knowledge and skills. An improperly installed air  conditioner may cause water leakage, fi re, or electric shock.
---|---
Provide a dedicated power supply for the air conditioner.
• A non-dedicated power supply may cause overheating or fire.
Do not install the unit where fl ammable gas could leak.
• If gas leaks and accumulates around the outdoor unit, it may cause an explosion.
| Earth the unit correctly.
• Do not connect the earth wire to a gas pipe, water pipe, lightning rod, or a telephone earth wire. Improper earthing may cause  electric shock.

CAUTION

| Install an earth leakage breaker depending on the installation location of the air conditioner (such as highly humid areas).
• If an earth leakage breaker is not installed, it may cause electric shock.
---|---
Ensure that the drain water is properly drained.
• If the drain passage is improper, water may drip down from the indoor/outdoor unit, wetting and damaging the furniture.

In case of an abnormal condition
Immediately stop operating the air conditioner and consult your dealer.

DISPOSAL

To dispose of this product, consult your dealer.

Note:
This symbol mark is for EU countries only.
This symbol mark is according to the directive 2012/19/ EU Article 14 Information for users and Annex IX, and/ or to the directive 2006/66/EC Article 20 Information for end-users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused.
This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed of separately from your household waste.
If a chemical symbol is printed beneath the symbol (Fig. 1), this chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:
Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)
In the European Union there are separate collection systems for used electrical and electronic products, batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste collection/recycling centre.
Please, help us to conserve the environment we live in!

NAME OF EACH PART

Indoor unit

When the remote controller cannot be used…
Emergency operation can be activated by pressing the emergency operation switch (E.O SW) on the indoor unit.
Each time the E.O SW is pressed, the operation changes in the following order:

Operation indicator lamp

Outdoor unit

Outdoor units may be different in appearance.
*1 The manufacturing year and month is indicated on the spec name plate.

PREPARATION BEFORE OPERATION

Before operation: Insert the power supply plug into the power outlet and/or turn the breaker on.

Installing the remote controller batteries

Setting current time

Remote controller

TIME, TIMER set buttons
Change the time forward/backward
(ON timer) : The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.

Press (forward) and (backward) to set the time of timer.

WEEKLY TIMER set buttons
Press to enter the weekly timer setting mode.
Press and to select setting day and number.

Press , , and to set ON/OFF, time, and temperature.
Press to complete and transmit the weekly timer setting.
Press to turn the weekly timer ON. (lights.)
Press again to turn the weekly timer OFF. (goes out.)

OFF/ON (stop/operate) button

Operation select button

Temperature buttons

FAN speed control button

VANE control button
Press to select vertical airfl ow direction. Each press will change airfl ow direction in the following order:

• Two short beeps will be heard from the indoor unit when set to AUTO.
• Moving the horizontal vane/multi-flow vane manually can cause trouble.
• The horizontal vane/multi-flow vane automatically moves in certain intervals to determine its position, and then it returns to the set position. •
• When the air outlet is switched between 1 FLOW and 2 FLOW, the horizontal vanes may move and change their positions.

VANE control button
Press to select the air outlet(s).
When 2 FLOW is selected, air blows from the top and the front of the unit. When 1 FLOW is selected, air blows only from the top of the unit.

ECONO COOL button
The set temperature and the airfl ow direction are automatically changed by the microprocessor.

****i-save button
A simplifi ed set back function enables to recall the preferred (preset) setting with a single push of the button. Press the button again and you can go back to the previous setting in an instance.

CLEANING

Instructions:

• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• When dirt stands out, wash it with kitchen neutral detergent diluted with lukewarm water to the specified concentration, then wipe off the detergent with a damp towel.
• Do not expose parts to direct sunlight, heat, or fl ames to dry.
• Do not use water hotter than 50°C.
• Do not use a scrubbing brush, a hard sponge, or the like.
• Do not soak or rinse the horizontal vane.

Important

• Clean the fi lters regularly for best performance and to reduce power consumption.
• Dirty fi lters cause condensation in the air conditioner which will contribute to the growth of fungi such as mold. It is therefore recommended to clean air fi lters every 2 weeks.

This information is based on REGULATION (EU) No 528/2012

MODEL NAME| Treated Article
(Parts name)| Active Substances
(CAS No.)| Property| Instruction for Use
(Safe handling information)
---|---|---|---|---
MFZ-T25/35/50/60VG| FILTER| Silver sodium hydrogen zirconium
phosphate
(265647-11-8)| Antibacterial
Antimold| • Use this product in line with the instruction  manual indications and for the intended purpose  only.
• Do not put into mouth. Keep away from children.
Dimethyloctadecyl[3(trimethoxysilyl)propyl]ammonium chloride
(27668-52-6)| Antivirus
Antibacterial
Antimold| • Use this product in line with the instruction manual indications and for the intended purpose  only.
• Do not put into mouth. Keep away from children.
MAC-2470FT-E| FILTER| Dimethyloctadecyl[3-
(trimethoxysilyl)propyl]ammonium chloride
(27668-52-6)| Antivirus
Antibacterial
Antimold| • Use this product in line with the instruction manual indications and for the intended purpose  only.
• Do not put into mouth. Keep away from children.
MAC-2370FT-E| FILTER| Silver zinc zeolite (130328-20-0)| Antibacterial| • Use this product in line with the instruction manual indications and for the intended purpose  only.
• Do not put into mouth. Keep away from children.

WHEN YOU THINK THAT TROUBLE HAS OCCURRED

Even if these items are checked, when the unit does not recover from the trouble, stop using the air conditioner and consult your dealer.

Indoor Unit
The unit cannot be operated.| •Is the breaker turned on?
•Is the power supply plug connected?
•Is the ON timer set?
The unit cannot be operated for about 3 minutes when restarted.| •This protects the unit according to instructions from the microprocessor. Please wail.
Mist is discharged from the air outlet of the indoor unit.| •The cool air from the unit rapidly cools moislure in the air inside the room, and it turns into mist.
The swing operation of the HORIZONTAL VANE is suspended for a while, then restarted,| •This is for the swing operation of the HORIZON-TAL VANE to be performed normally.
The air flow direction changes during operation.
The direction of the horizontal vane/multi-flow vane cannot be adjusted with the  remote controller.| •In the heating operation, if the air flow temperature is too low or when defrosting is  being done, the horizontal vane is automatically set to vertical position. The multi-flow  vane is set to the closed position.
•When the air conditioner is operated in COOL or DRY mode, if the operation continues  with air blowing horizontally for 1 hour, the direction of the air flow is  automatically set to position (1) to prevent condensed water from dropping. The multi- flow vane is set to the closed position.
•The horizontal vane and the multi-flow vane automatically moves in certain intervals  to determine its position, and then it returns to the set position.
The operation is stopped for about 10 minutes in the heating operation.| •Defrosting of the outdoor unit is being done. Since this is completed in max.10  minutes, please wait. (When the outside temperature is too low and humidity is too  high, frost is formed.)
The unit starts operation by itself when the main power is turned on, though it isn’t oper- ated with the remote controller.| •These models are equipped with an auto restart function. When the main power is  turned off without stopping the unit with the remote controller and is turned on again, the unit starts operation automatically in the same mode as the one set with the remote controller just before the shutoff of the main power. Refer to -Auto restart function”.
The multi-flow vane opens and closes automatically.| •The multi-flow vane is automatically control-led by a microcomputer according to the air flow temperature and operation time of the air conditioner.
The indoor unit which is not operating becomes warm and a sound, similar to water flowing, is heard from the unit.| •A small amount of refrigerant continues to flow into the indoor unit even though it is not operating.
The indoor unit discolors over time.| •Although plastic turns yellow due to the influence of some factors such as ultraviolet light and temperature, this has no effect on the product functions.
Outdoor Unit (Muttl system)
When heating operation is selected, operation does not start right away.| •When operation is started during defrosting of outdoor unit is done, it takes a few minutes (max. 10 minutes) to blow out warm air.
The fan of the outdoor unit
does not rotate even though the compressor is running. Even if the fan starts to rotate, it stops soon.| •When the outside temperature is low during cooling operation, the fan operates intermittently to maintain sufficient cooling capacity.
Water leaks from the outdoor unit.| •During COOL and DRY operations, pipe or pipe connecting sections are cooled and this causes water to condense.
•In the heating operation, water condensed on the heat exchanger drips down.
•Inthe heating operation, the defrosting operation makes water frozen on the outdoor unit melt and drip down.
White smoke is discharged from the outdoor unit.| •In the heatingoperation, vapor generated by the
defrosting operation looks like white smoke.
Remote controller
The display on the remote controller does not appear or it is dim. The indoor unit does not respond to the remote control signal.| •Are the batteries exhausted?
•Is the polarity (+, -) of the batteries correct?
•Are any buttons on the remote contrdler of other electric appliances being pressed?
Symptom| Explanation & Check points
---|---
Does not cool or host
The room cannot be cooled or heated sufficiently.| •Is the temperature setting appropriate?
•Is the fan setting aapropriate? Please change fan speed to High or Super High.
•Is the air outlet selection is set to 1 FLOW? Set it to 2 FLOW.
•Is the filter clean?
•Is the fan or heat exchanger of the indoor unit clean?
•Are there any obstacles blocking the air inlet or outlet of the indoor or outdoor unit?
•Is a window or door open?
•It may take a certain time to reach the setting temperature or may not reach that depend ing on the size of the room, the ambient temperature, and the like.
The room cannot be cooled sufficiently.| •When a ventilation fan or a gas cooker is used in a room, the cooling load increases, resulting in an insufficient cooling effect.
•When the outside temperature is high, the cooling effect may not be sufficient.
The room cannot be heated sufficiently.| •When the outside temperature is low, the heat-ing effect may not be sufficient.
Air does not blow out soon in the heating operation.| •Please wait as the .snit is preparing to blowout warm air.
Airflow|
The air from the indoor unit smells strange.| •Is the filter clean?
•Is the fan or heat exchanger of the indoor unit clean?
•The unit may suck in an odor adhering to the wall, carpet, furniture, cloth, etc. and blow it out with the air.
Sound
Cracking sound is heard.| •This sound is generated by the expansiorV contraction of the panel, etc. due to change in temperature.
The sound as burbling is heard.| •This sound is heard when the outside air is absorbed from the drain hose by turning on the range hood or the ventilation fan, making water flowing in the drain hose to spout out.
This sound is also heard when the outside air blows into the drab hose in case the outside wind is strong.
Mechanical sound is heard from the indoor unit.| •This is the switching sound in turning odoff the fan or the compressor.
The sound of water flowing is heard.| •This is the sound of refrigerant or condensed water flawing in the unit.
Hissing sound is sometimes heard.| •This is the sound when the flow of refrigerant inside the unit is switched.
The sound of motor and swirling sound is heard from the indoor unit.| •This is the sound of water condensed during COOL/DRY operation being drained from the indoor unit.
•Sound of water draining may also be heard from indoor units which are not operating. (The sound will stop automatically. Please wait.)
Timer
Weekly timer does not operate
according to settings.| • Is the ON/OFF timer set?
• Transmit the setting information of the weekly timer to the indoor unit again. When  the information is successfully received, a long beep will  sound from the indoor unit.
If information fails to  be  received, 3 short beeps will be heard.
Ensure information is successfully received.
• When a power failure occurs and the main power turns off, the indoor unit built-in  clock will be incorrect. As a result, the weekly timer may not work normally.
Be sure to place the remote controller where the signal can be received by the indoor  unit.
The unit starts/stops the operation by itself.| • Is the weekly timer set?

In the following cases, stop using the air conditioner and consult your dealer.

• When water leaks or drips from the indoor unit.
• When the left operation indicator lamp blinks.
• When the breaker trips frequently.
• The remote control signal is not received in a room where an electronic ON/OFF type fl uorescent lamp (inverter-type fl uorescent lamp, etc.) is used.
• Operation of the air conditioner interferes with radio or TV reception. An amplifi er may be required for the affected device.
• When an abnormal sound is heard.
• When any refrigerant leakage is found.

SPECIFICATIONS

KT6OVG
Outdoor| —| —| —| —**
Function| Cooling| Heating| Cooling| Heating| Cooling| Heating| Cooling| Heating
Power supply| –IN, 230 V, 50 Hz
Capacity| kW| —| —| —| —| —| —| —| —
Input| kW| 0.020| 0.024| 0.020| 0.024| 0.037| 0.052| 0.063| 0.059
Weight| Indoor| kg| 15.| 15.0
IP code| Indoor| 1P20
Permissible excessive operating pressure| LP Ps| MPa| —
Hp ps| MPa| 4.
Noise level (Sin le)| Indoor (Super High/ High/Med./Low/Silent)| dat
data)
–1″| 41/37/31/
24/19| 44/37/30/
23/19| 41/37/31/
24/19| 44/37/30/
23/19| 48/42/37/
32/28| 49/44/40/
35/29| 53/46/40/
36/28| 51/47/41/
35/29
Air flow volume (Single)| Indoor (Super High/ High/Med/Low/Silent)| mill min| 8.9/7.8/6.5/
4.8/3.9| 9.7/7.3/5.6/
4.0/3.5| 8.9/7.8/6.5/
4.8/3.9| 9.7/7.3/5.6/
4.0/3.5| 12.3/10.418.6/
6.7/5.6| 14.0111.6/9.4/
7.7/6.0| 15.0/12.3/9.6/
8.0/5.6| 14.6/12.5/9.7/
7.7/6.0
Noise level (Multi)| Indoor (Super High/ High/Med./Low/Silent)| dB(A)| 43/38/33/
28/23| 44/39/34/
28/24| 43/38/33/
28/23| 44/39/34/
28/24| 48/42/37/
32/28| 49/44/40/
35/29| —| —
Air flow volume (Multi)| Indoor (Super High/ High/Med/Low/Silent)| 3,_….
m ‘ “1| 9.0/7.8/6.5/
4.8/4.2| 9.7/7.8/6.3/
4.9/4.2| 9.0/7.816.5/
4.8/4.2| 9.7/7.8/6.3/
4.9/4.2| 12.3/10.4/8.6/
6.7/5.6| 14.0/11.6/9.4/
7.7/6.0| –| –

Guaranteed operating range

| | Indoor| Outdoor
---|---|---|---
Cooling| Upper limit| 32°C DB
23°C WB| *Note 2
Lower limit| 21°C DB
15°C WB
Heating| Upper limit| 27°C DB
—
Lower limit| 20°C DB
—

DB: Dry Bulb
WB: Wet Bulb

Note:

1. Rating condition
   Cooling — Indoor: 27°C DB, 19°C WB
   Outdoor: 35°C DB
   Heating — Indoor: 20°C DB
   Outdoor: 7°C DB, 6°C WB

2. As for specifi cations, please confi rm your dealer and/or refer to the catalogue.

Sound power level
(per speed setting, if applicable)| LWA| dB(A)| 54/47/43/37/35| 60/54/49/42/39

(EU)2016/2281

Importer:
Mitsubishi Electric Europe B.V.
Capronilaan 34, 1119 NS, Schiphol Rijk, The Netherlands
French Branch
2, Rue De L’Union, 92565 RUEIL MAISON Cedex

www.uefairedemesdechets.fr

German Branch
Mitsubishi-Electric-Platz 1 40882 Ratingen North Rhine-Westphalia Germany
Belgian Branch
8210 Loppem, Autobaan 2, Belgium
Irish Branch
Westgate Business Park, Ballymount Road, Upper Ballymount, Dublin 24, Ireland
Italian Branch
Via Energy Park, 14 20871 Vimercate (MB), Italy
Norwegian Branch
Gneisveien 2D, 1914 Ytre Enebakk, Norway
Portuguese Branch
Avda. do Forte 10, 2794-019 Carnaxide, Lisbon, Portugal
Spanish Branch
Av. Castilla, 2 Parque Empresarial San Fernando – Ed. Europa, 28830 San Fernando de Henares (Madrid), Spain
Scandinavian Branch
Hammarbacken 14, P.O. Box 750, SE-19127, Sollentuna, Sweden
UK Branch
Travellers Lane,Hatfied ,Hertfordshire,AL10 8XB.England,UK
Polish Branch
Krakowska 50, PL-32-083 Balice, Poland

UK DECLARATION OF CONFORMITY
MITSUBISHI ELECTRIC CORPORATION, SHIZUOKA WORKS 18-1, OSHIKA 3-CHOME, SURUGA- KU, SHIZUOKA-CITY 422-8528, JAPAN
hereby declares under its sole responsibility that the air conditioners and heat pumps described below for use in residential, commercial and light- industrial environments:
MITSUBISHI ELECTRIC, MFZ-KT25VG-E, MFZ-KT35VG-E, MFZ-KT50VG-E, MFZ- KT60VG-E * : , , 1, 2, 3, · · · , 9

Note: Its serial number is on the nameplate of the product.

Directives
The Electrical Equipment (Safety)Regulations 2016
The Supply of Machinery (Safety)Regulations 2008
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

EC DECLARATION OF CONFORMITY

MITSUBISHI ELECTRIC CORPORATION, SHIZUOKA WORKS
18-1, OSHIKA 3-CHOME, SURUGA-KU, SHIZUOKA-CITY 422-8528, JAPAN

hereby declares under its sole responsibility that the air conditioners and heat pumps described below for use in residential, commercial and light- industrial environments:

MITSUBISHI ELECTRIC, MFZ-KT25VG, MFZ-KT35VG, MFZ-KT50VG, MFZ-KT60VG

Note: Its serial number is on the nameplate of the product.

Directives
2014/35/EU: Low Voltage Directive
2006/42/EC: Machinery Directive
2014/30/EU: Electromagnetic Compatibility Directive
2011/65/EU: RoHS

MITSUBISHI ELECTRIC CORPORATION
HEAD OFFICE: TOKYO BUILDING, 2-7-3,
MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310,
JAPAN
JG79Y973H03

References

• MITSUBISHI ELECTRIC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>