CROSLEY FURNITURE 60189 Campbell Writing Desk Installation Guide

PART LIST

HARDWARE LIST

ADDITIONAL TOOLS (Not Provided)

Note: It Is not recommended to use power tools during assembly.

Phillips Head Screwdriver

Step 1. Attach knobs (part #6) to the drawers using round head bolts (part #7) and Philips head screwdriver.

Step 2. Attach siderail (part E) to right front leg (part C) and back leg (part D) using wood dowels (part #1), screws (part #2) and Phillips head screwdriver. Attach side rail (part E) to left front leg (part B) and back leg (part D) using wood dowels (part #1), screws (part #2) and Philips head screwdriver.

Step 3. Carefully lay top panel (part A) upside down on a soft surface and open drawers as shown. Attach assembled legs (parts B & D) to top panel (part A) using flat washers (part #5), spring washers (part #4), hex socket head bolts (part #3), and allen wrench (part #8) as shown below.

Step 4. Attach back rail (part F) to back legs (part D) using wood dowels (part #1), screws (part #2) and Phillips head screwdriver. Attach assembled legs (parts C & D) to top panel (part A) using flat washers (part #5), spring washers (part #4) hex socket head bolts (part #3), and allen wrench (part #8) as shown.

Step 5. Carefully flip desk upright.

Step 1. Open two drawers as shown. Attach knobs (part #1) to the front of drawers using round head bolts (part #2) and Phillips head screwdriver.

Step 2. Attach hutch (part A) to desk (part B) using metal plates (part

3), round head screws (part #4) and Phillips head screwdriver.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>