Rowenta YD3034 Hair Clipper Instructions Manual

Rowenta YD3034 Hair Clipper

Read the instructions before use to avoid any danger due to misuse.

Hair clipper

Parts and Accessories

• Hair Clipper: The main body of the hair clipper which houses the motor, blades, power switch, and battery.
• Comb Attachments: There are four different comb attachments to choose from, each providing a different length for hair cutting: 3 mm, 6 mm, 9 mm, and 12 mm.
• Cleaning Brush: A small brush intended for cleaning hair and debris from the clipper blades after use.
• Lubricating Oil: A bottle of oil for maintaining the clipper blades. Regular lubrication keeps the blades sharp and ensures they operate smoothly.

To use the clipper with its accessories:

• Choose the comb attachment that corresponds to the length of hair you want to obtain in order to achieve the desired result.
• Slide the comb onto the blade region of the clipper until it clicks into place. This will allow you to attach the comb to the clipper.
• To ensure that the hair is cut evenly, turn on the clipper by using the power switch, and then begin cutting the hair in the opposite direction of the direction in which the hair grows.
• After using the clipper, make sure to turn it off, remove the comb attachment, and then use the cleaning brush to remove any hair that may have become embedded in the blades.
• To keep the blades in good condition, you should apply a drop or two of the lubricating oil to each of them.

Always ensure the clipper is turned off before attaching or removing combs, and handle the blades with care as they are sharp. For complete care instructions and safety information, refer to the user manual that came with your Rowenta YD3034 Hair Clipper.

SAFETY INSTRUCTIONS

• For your safety, this appliance complies with the applicable standards and regulations (Low Voltage Directive, Electromagnetic Compatibility, Environmental…).
• Check that the voltage of your electricity supply matches the voltage of your appliance. Any error when connecting the appliance can cause irreparable harm, is not covered by the guarantee.
• The installation of the appliance and its use must however comply with the standards in force in your country.
• This hair clipper can be used by children aged from 3 years under supervision.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
  • CAUTION: Keep the appliance dry.
• Never use your appliance with wet hands or near water contained in bathtubs, showers, sinks, or other containers…
• When using the appliance in the bathroom, unplug it after use as the presence of water nearby may pose a danger even when the appliance is turned off.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Stop using your appliance and contact an Authorised Service Centre if:
  • your appliance has fallen.
  • it does not work correctly.
• The appliance must be unplugged:
  • before cleaning and maintenance procedures.
  • if it is not working correctly.
  • as soon as you have finished using it.
  • if you leave the room, even momentarily.
• Do not use if the cord is damaged.
  • Do not immerse or put under running water, even for cleaning purposes.
  • Do not hold it with damp hands.
  • Do not hold the appliance by the casing, which is hot, but by the handle.
  • Do not unplug by pulling on the cord, rather pull out by the plug.
  • Do not use an electrical extension lead.
  • Do not clean with abrasive or corrosive products.
  • Do not use at temperatures below 0°C and above 35°C.

GUARANTEE

Your appliance is designed for use in the home only. It should not be used for professional purposes. The guarantee becomes null and void in the case of improper usage.

ENVIRONMENT PROTECTION FIRST!

• Your appliance contains valuable materials that can be recovered or recycled.
• Leave it at a local civic waste collection point.

These instructions are also available on our website www.rowenta.com

Usage Instructions

• Select the Desired Comb Attachment:
  • Choose the appropriate comb attachment for your desired hair length. The image indicates measurements such as 11 mm, 15 mm, and 2 mm.
• Attach the Comb:
  • Slide the comb attachment onto the clipper until it clicks into place, ensuring it’s securely attached.
• Power On the Clipper:
  • Turn on the hair clipper using the power switch or button.
• Cutting Hair:
  • Begin cutting by placing the flat side of the comb against the head.
  • Move the clipper upwards against the direction of hair growth for an even cut.
  • Use the clipper without a comb attachment for a closer trim on the sides and back of the head.
• Trimming Around Ears:
  • To trim around the ears, remove the comb attachment and use the bare clipper. Tilt the ear down and carefully move the clipper around the ear’s contour.
• Cleaning the Clipper:
  • After use, brush any hair off the clipper blades with the provided cleaning brush.
  • For a more thorough cleaning, detach the blades or the head of the clipper if possible and rinse under water as indicated by the water symbol on the image.
• Charging the Clipper:
  • Connect the clipper to the charging cord and plug it into a power outlet.
  • A charging indicator may light up to show that the device is charging.
• Storing the Clipper:
  • Once the clipper is clean and dry, store it in a safe place, preferably in a pouch or its original packaging to protect the blades from damage.

FREQUENTLY ASKED QUESTIONS

How do I choose the right comb attachment for my desired hair length on Rowenta YD3034?

You can choose from four comb attachments: 3 mm, 6 mm, 9 mm, and 12 mm. Select the one that corresponds to the length of hair you want to achieve.

How do I attach a comb to the Rowenta YD3034 hair clipper?

To attach a comb, slide it onto the blade region of the clipper until it clicks into place. This ensures that the comb is securely attached to the clipper.

How do I turn on the Rowenta YD3034 hair clipper?

Use the power switch or button to turn on the hair clipper. Make sure it is off when attaching or removing combs.

What is the recommended technique for cutting hair with the Rowenta YD3034 clipper?

Begin cutting by placing the flat side of the comb attachment against the head. Move the clipper upwards against the direction of hair growth for an even cut.

Can I use the Rowenta YD3034 clipper without a comb attachment for a closer trim?

Yes, you can use the clipper without a comb attachment for a closer trim, especially on the sides and back of the head.

How should I trim around the ears with Rowenta YD3034 clipper?

To trim around the ears, remove the comb attachment and use the bare clipper. Tilt the ear down and carefully move the clipper around the contour of the ear.

How do I clean the clipper after use?

After using the clipper, use the provided cleaning brush to remove hair and debris from the clipper blades. For a more thorough cleaning, you can detach the blades or the head of the clipper if possible and rinse it under water as indicated by the water symbol on the image.

How do I charge the Rowenta YD3034 clipper?

Connect the clipper to the charging cord and plug it into a power outlet. Look for a charging indicator, which may light up to show that the device is charging.

What are the storage recommendations for the Rowenta YD3034 clipper?

Once the clipper is clean and dry, store it in a safe place, preferably in a pouch or its original packaging to protect the blades from damage.

Are there any safety precautions I should be aware of when using the Rowenta YD3034 Hair Clipper?

Yes, make sure to read the safety instructions provided in the manual. Keep the appliance dry, avoid using it near water, and handle it with care. Children should not play with the appliance, and it should be unplugged when not in use. If the supply cord is damaged, it should be replaced by a qualified person.

Can I use the Rowenta YD3034 Hair Clipper for professional purposes?

No, this hair clipper is designed for home use only. It should not be used for professional purposes, as doing so may void the warranty.

What should I do if the Rowenta YD3034 hair clipper falls or is accidentally damaged?

If your hair clipper has fallen or is damaged, it is recommended to stop using it and contact an Authorized Service Centre for assessment and repair.

REFERENCE:Rowenta YD3034 Hair Clipper Instructions Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>