atomi AT1705 55W Wireless Charging Station User Guide
- June 15, 2024
- atomi
Table of Contents
atomi AT1705 55W Wireless Charging Station
Product Information
The 55W Wireless Charging Station is a convenient and efficient way to charge your compatible devices wirelessly. With its sleek design and powerful charging capabilities, this charging station is perfect for home or office use.
Specifications
- Model: AT1705
- Power Output: 55W
- Wireless Charging Standards: Qi
- Input Voltage: 110-240V AC
- Output Voltage: 5V DC
- Charging Efficiency: Up to 80%
- Charging Distance: Up to 8mm
- Dimensions: 150mm x 100mm x 15mm
Product Usage Instructions
Step 1: Placement
Place the wireless charging station on a flat and stable surface. Ensure that there are no obstructions between the charging station and your device.
Step 2: Power Connection
Connect the included power adapter to the charging station’s power input port. Plug the other end of the adapter into a wall outlet.
Step 3: Device Compatibility
Ensure that your device is compatible with Qi wireless charging. If your device is not Qi-enabled, you may need to purchase a separate wireless charging receiver.
Step 4: Charging Your Device
Place your compatible device on the center of the charging station. The device should align with the charging coil on the station for optimal charging performance.
Step 5: Charging Status
A LED indicator on the charging station will light up to indicate that your device is being charged. The color of the LED may vary depending on the charging status.
Step 6: Charging Completion
Once your device is fully charged, the LED indicator will turn off or change color to indicate that the charging process is complete.
Step 7: Removal of Device
When you want to remove your device from the charging station, simply lift it off the station. There is no need to unplug the charging station from the power source.
FAQ
Q: What devices are compatible with the 55W Wireless Charging Station?
A: The charging station is compatible with any Qi-enabled devices, including smartphones, smartwatches, and earbuds.
Q: Does the charging station come with a power adapter?
A: Yes, the charging station comes with an included power adapter.
Q: How far can the charging station charge wirelessly?
A: The charging station can charge devices wirelessly up to a distance of 8mm.
55W Wireless Charging Station
15W Wireless Charger + 20W PD Port + Dual USB-C Ports + Dual Smart USB Ports
User Guide
Date Code: 09/23
Thank you for purchasing the Atomi
55W Wireless Chargeing Station Designed to power almost any device, Atomi’s 55
Wireless Chargeing Station replaces bulky plugs and unruly wires on your desk.
Adjust the wireless charging pad up to 65° so you can view your phone screen
even while it charges. Plus, the charger features an ultra-powerful 20W PD
port, dual USB-C ports, and dual Smart USB ports to provide the most efficient
charge possible for tablets, phones, and more.
What’s Inside
55W Wireless Chargeing Station
AC Power Cable
Specifications
- Model : AT1705
- Input: 100-240V~ 50/60Hz 1.2A
- Wireless Output: 15W
- PD Output: 5V=3A, 9V=2.22A, 12V=1.67A, 20W max.
- Type-C+USB Output: 5V=2.4A (Each Port)
- Total 5V=4A max.
- Total Output: 55W
Charging Your Devices
-
Connect the included AC cable to the port on the back of your Charge Station, then plug into any nearby outlet.
-
To charge wirelessly, place your device on the top of the Charge Station in the position of your choice. Charging will begin on contact.
-
To use the charging ports, connect to the Charge Station using the cables provided with your respective devices.
-
Charge up to 6 devices all at once.
Charge Indicator Light
The indicator light shows the charging status for the wireless charging.
-
Blue solid light means the device is charging.
-
Blinking light means device is not charging because the phone is not properly aligned with the wireless charging pad.
-
If the indicator light is off, it means there is no charging.
-
When the device is fully charged, the indicator light will change to green and turn off after 30s.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radiation
Exposure Statement
The FCC certification of this device refers to RF exposure testing performed
in typical operating conditions, where a person is no closer than 20
centimeters from the device surface at all times, except for non-repetitive
patterns with transient time intervals in the order of a second. Only in the
stated conditions, the device is shown to fully comply with the FCC RF
Exposure requirements of KDB 447498.
Safety Information
- Read these instructions carefully for best use.
- DO NOT use the Charge Station near water or expose it to rain or moisture.
- DO NOT use the Charge Station near open flames, such as candles, heat sources, radiators and stoves.
- Only clean the Charge Station with a dry cloth.
- Caution: Risk of electric shock. Grounding continuity must be maintained.
- For connection to a power supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
- Please check prior use, if output voltage and current of the power supply is suitable for the product.
- Children should be supervised to ensure that they do not play with the appliance.
For questions or concerns, email us at
info@atomiusa.com
Manufactured and marketed by Atomi Inc.
10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc.
Designed by Atomi in New York. Made in China Three-year limited warranty from
the date of purchase against defects in material and workmanship.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>