nVent CCT4X12 CADDY Conduit Trapeze Instruction Manual
- June 15, 2024
- nVent
Table of Contents
nVent CCT4X12 CADDY Conduit Trapeze
Product Information
Specifications
- Material: Steel
- Finish: Pregalvanized
- EMT Conduit Size: 4
- Rigid Conduit Size: 4
- Number of Conduits: 2
- Rod Size: 3/8
- Thickness: 14 ga
- Hole Size 1: 0.56
- Hole Size 2: 0.28
- Hole Size 3: 0.12
- Hole Size 4: 4.62
- Length 1: 12
- Length 2: 14
- Length 3: 6
- Length 4: 6
- Length: 14
Features
The nVent CADDY Conduit Trapeze CCT4 range is a fast and cost-effective
method to install larger feeder circuits of conduit in overhead trapeze
installations. The CCT4 series reduces installation time and material cost by
eliminating the need for traditional fasteners, making it an ideal solution
for contractors looking to maximize installation efficiency.
Certifications
No certifications mentioned in the user manual.
Additional Product Details
The table contains maximum conduit size values. UL Load Rating,
Orientation, Mounting Fastener:
| Horizontal| Vertical
---|---|---
1/2 Threaded Rod| 600 lb| 650 lb
1/2 Fastener| 600 lb| 600 lb
Evenly Distributed Load Rating| 600 lb| 550 lb
Fastener Spacing| 6 inches| 12 inches
Diagrams
No diagrams provided in the user manual.
Warning
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Improper installation,
misuse, misapplication, or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury, and death and/or void your warranty.
Contact Information
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Brands
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
Disclaimer
nVent reserves the right to change specifications without notice.
Product Usage Instructions
Installation
- Ensure you have the necessary tools and equipment for installation.
- Identify the desired location for the Conduit Trapeze CCT4 installation.
- Measure and mark the hole locations according to the provided specifications.
- Using appropriate fasteners, secure the Conduit Trapeze CCT4 to the mounting surface.
- Insert the conduits into the Conduit Trapeze CCT4, ensuring they are securely held in place.
Maintenance
To ensure optimal performance and longevity of the Conduit Trapeze CCT4,
regular maintenance is recommended:
- Inspect the Conduit Trapeze CCT4 for any signs of damage or wear.
- If any damage or wear is found, replace the affected parts immediately.
- Clean the Conduit Trapeze CCT4 regularly to remove any dirt or debris that may accumulate.
- Check the tightness of the fasteners periodically and tighten if necessary.
Troubleshooting
If you experience any issues with the Conduit Trapeze CCT4, refer to the
troubleshooting section in the product instruction sheets or contact nVent
customer service for assistance.
FAQ
-
Q: What is the maximum conduit size supported by the Conduit Trapeze CCT4?
A: The maximum conduit size supported is 4. -
Q: Can the Conduit Trapeze CCT4 be used for vertical installations?
A: Yes, the Conduit Trapeze CCT4 can be used for both horizontal and vertical installations. -
Q: What is the load rating for the Conduit Trapeze CCT4?
A: The load rating is 600 lb for horizontal installations and 550 lb for vertical installations.
zONDUIT TRAPEZE CCT4, 2 NUMBER OF CONDUITS, 14″
CATALOG NUMBER
CCT4X12
The nVent CADDY Conduit Trapeze CCT4 range is a fast and cost-effective method to install larger feeder circuits of conduit in overhead trapeze installations. The CCT4 series reduces installation time and material cost by eliminating the need for traditional fasteners, making it an ideal solution for contractors looking to maximize installation efficiency.
CERTIFICATIONS
FEATURES
- Ideal for larger feeder circuits
- Accommodates 1/2″ threaded rod trapeze drops
- Up to 25% material savings over traditional methods
- Reduces installation time up to 50%
- Complies with UL® 2239
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Pregalvanized
- EMT Conduit Size: 4″
- Rigid Conduit Size: 4″
- Number of Conduits: 2
- Rod Size: 3/8″
- Thickness: 14 ga
- Hole Size 1: 0.56″
- Hole Size 2: 0.28″
- Hole Size 3: 0.12″
- Hole Size 4: 4.62″
- Length 1: 12″
- Length 2: 14″
- Length 3: 6″
- Length 4: 6″
- Length: 14″
ADDITIONAL PRODUCT DETAILS
The table contains maximum conduit size values.
UL Load Rating
Orientation| Mounting Fastener| Fastener Spacing
6″| 12″| 18″| 24″| 30″| 36″| 42″| 48″
Horizontal| 1/2″ Threaded Rod| 600 lb| 600 lb| 550 lb| 500 lb| 475 lb| 450 lb|
425 lb| 400 lb
Vertical| 1/2″ Fastener| 600 lb| 600 lb| –| –| –| –| –| –
Evenly Distributed Load Rating
Horizontal| 1/2″| –| 650 lb| 600 lb| 550 lb| 525 lb| 500 lb| 475 lb| 450 lb
DIAGRAMS WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support
Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793
Europe Germany:
800 1890272 Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19 Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
- nVent.comCADDY
- ERICO HOFFMAN
- RAYCHEM SCHROFF
- TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>