Schneider Electric LVS04711 Active Interface Canalis Instructions
- June 15, 2024
- Schneider Electric
Table of Contents
Schneider Electric LVS04711 Active Interface Canalis
Product Information
Specifications
- Model Numbers: LVS04711, LVS04712, LVS04713, LVS04714
- Supported Languages: English, French, Spanish, German, Italian, Portuguese, Chinese, Russian
FAQ
- Q: Can I install and operate the product myself?
- A: The product should be operated, serviced, and maintained only by qualified personnel. It is recommended to seek professional assistance for installation and operation.
- Q: What should I do if I encounter any issues with the product?
- A: If you encounter any issues or have questions, refer to the user manual for troubleshooting steps. If the issue persists, contact customer support for further assistance.
Product Usage Instructions
Safety Instructions
DANGER: DANGER OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
- Disconnect all power before servicing equipment.
- Always use a properly rated voltage-sensing device to confirm that all power is off.
- Failure to follow these instructions can result in serious injuries.
Equipment Damage Instructions
NOTICE
- Connect the casing of the prefabricated interface to the distribution board earth bar when it is used as input (case I2).
- Connect the casing of the prefabricated interface to the distribution board earth bar when it is used to supply receivers (case I3).
- The type and cross-section of the cable must be defined according to the short-circuit current.
- Failure to follow these instructions can result in equipment damage.
Installation Instructions
Follow the steps below to install the product:
- Ensure that the power is disconnected before starting the installation.
- Identify the appropriate model number for your specific requirements.
- Refer to the user manual for detailed installation instructions.
- If you are unsure or need assistance, contact qualified personnel.
Operational Instructions
Once the product is installed, follow these instructions for operation:
- Ensure that the power is connected and turned on.
- Refer to the user manual for specific operational instructions based on your model number.
- If you encounter any issues or have questions, refer to the FAQ section or contact customer support.
Product Overview
What In The Box
Safety Information
PLEASE NOTE
- Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel.
- No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this material.
DANGER: HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
- Disconnect all power before servicing equipment.
- Always use a properly rated voltage sensing device to confirm that all power is off.
Failure to follow these instructions will result in death or serious injury.
NOTICE: EQUIPMENT DAMAGE IN THE EVENT OF PHASE-TO-EARTH SHORT-CIRCUIT
- Connect the casing of the prefabricated interface to the distribution board earth bar when it is used as input (case I2).
- Connect the casing of the prefabricated interface to the distribution board earth bar when it is used to supply receivers (case I3).
- The type and cross-section of the cable must be defined according to the short-circuit current.
Failure to follow these instructions can result in equipment damage.
Installation Instructions
Information
Wiring
Contact
Schneider Electric Industries SAS
- 35, rue Joseph Monier 92500 Rueil-Malmaison
- www.se.com
As standards, specifications and designs change from time to time, please ask for confirmation of the information given in this publication.
- Publication: Schneider Electric
- Impression: 105 x 297 mm
This document has been printed on ecological paper.
Schneider Electric Limited
- Stafford Park 5 Telford, TF3 3BL United Kingdom
- www.se.com/uk
© 2022 Schneider Electric – All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>