TARAMPS T 9.000 Chipeo Amplifier User Manual

TARAMPS T 9.000 Chipeo Amplifier

Term of warranty

TARAMPS, located on Abilio Daguano Street 274, Res. Manoel Martins – Alfredo Marcondes, SP – Brazil, ZIP CODE 19180-000, guarantees this product against any defects on terms of project, making, assembling, and/or with solidarity, due to project vices which cause it improper or inadequate to its original use within 12 months from the date of purchase. In case of a defect during the warranty period, TARAMPS’ responsibility is limited to the repairing or substitution of the device of its own making.

This warranty excludes

• Damaged products by improper installation, water infiltration, and violation by unauthorized individuals;
• Tamper or torn warranty seal;
• Cases in which the product is not used in adequate conditions;
• Defects caused by accessories, modifications or features attached to the product;
• The product with damage from falling, bumps or nature-related problems (flooding, lightning, etc.);
• Warranty card is not properly filled or torn;
• Costs involving uninstallation, reinstallation of equipment as well as shipment to the factory;
• Damage of any kind, due to problems in the product, as well as losses caused by discontinued use of the product.

Technical assistance

For international support, check on our website: www.taramps.com.br/en/rede- de-assistencias-tecnicas or contact direct the factory support:

• Phones: +55 18 3266-4050 / +55 18 99749-3391
• E-mail: service@taramps.com.br

Introduction

Congratulations on your purchase of a Taramps product. It was developed in a modern laboratory and with the latest technology. This manual covers all features, operations and instructions to solve any doubt that may arise during the installation. Please take some time to read it carefully to ensure the proper installation and the use of all the benefits that this product can offer. For questions, please call +55 (18) 3266-4050, e-mail support@taramps.com.br or visit www.taramps.com.br.

Safety requirements

To ensure proper use, please read through this manual before using the amplifier. You must know the CAUTIONS contained here.

• The installation of this amplifier must be done by a qualified professional.
• Wear safety glasses, insulated gloves and correct tools for installing this product.
• This amplifier is for use with 12V batteries. Always check the voltage before installing.
• This amplifier must be installed in a firm place with at least 1” space around the heatsink for proper heat spreading.
• Never install the amplifier in places exposed to dust, humidity and water. Pay attention to installing it far from fuel tank, fuel lines, heat sources and other parts of the vehicle.
• Be sure to install a protection fuse or a circuit breaker near to the battery. Follow the ampere rating as indicated here in this manual. Use of an improper fuse or circuit breaker could result in overheating, smoke, damage to the product, injury or burns.
• Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through the car’s body.
• Before making any connection to the amplifier, disconnect the battery negative terminal.
• When in use, the external surface of may amplifier becomes hot. Avoid touching the heatsink area and keep children far from the amplifier.
• This amplifier may produce high sound pressure levels. Avoid continuous exposure to levels over 85dB to prevent permanent hearing loss.
• Output connections for speakers may have voltage levels when the amplifier is operating. Make sure that the amplifier is turned OFF before proceeding with any connection or disconnection in these terminals.
• If you want to dispose of this amplifier, don’t throw it on domestic waste. It must be collected by a used electronic product disposal service for proper recycling.

Safety

As you read this manual, pay attention to the safety symbols.

CAUTION
This symbol with “CAUTION” is intended to alert the user to the presence of important instructions. Failure to heed the instructions will result in risk of injury to the user or product damage. Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units that were previously produced.

Functions, inputs & outputs

1. L/R: Inputs of signals to be amplified. Connect these signals to the RCA outputs of the Head Unit, using good quality shielded cables to avoid noise influence.

2. GAIN: Adjusts the input sensitivity of the amplifier, allowing a perfect adjustment to the output signal levels of various head unit models on the market. It is possible to adjust from 4V (minimum sensitivity) to 0.2V (maximum sensitivity).

3. MONITOR LEVEL REMOTE: Connection for the LED Monitor accessory, whose function is to monitor the amplifier, informing clipping and activation of protections and also for the Monitor level Remote which monitors the above functions and controls the volume of the amplifier. (Accessory not included).

4. SPEAKER: Output (positive and negative) to transducer connection (speakers). Follow the polarity described and the minimum impedance recommended. To combine speakers, the resulting impedance must be taken into consideration. See the examples below:
   CAUTION

   • Due to the presence of voltage at the output terminals when the product is turned on, avoid contact with them. Risk of electric shock.

5. SMART COOLER: This amplifier has two internal ventilation fans. For perfect functioning, the amplifier must be installed in a cool and aired place with at least 1” (25mm) space around the heatsink for proper heat spreading. The usual working temperature of the amplifier is 70°C (158°F).

CAUTION
The fan and ventilation openings are responsible for cooling the amplifier when it is in use, so it cannot be obstructed.

Power supply connector

1. NEGATIVE POWER SUPPLY TERMINAL: A 1/0 AWG (50mm²) cable as short as possible must be used, and connected to the negative battery pole.
2. REMOTE TERMINAL: The remote Head Unit output must be connected by a 0,75mm² (18 AWG) cable. It is not necessary to connect both remote inputs, just connect one to activate the amplifier.
3. POSITIVE POWER SUPPLY TERMINAL: Use a 1/0 AWG (50mm²) cable directly from the positive battery terminal with fuse (450A), as close as possible from the battery. It is recommended that all cables must have tinned ends to improve electrical contact. In case of power bus bar using, avoid tightening with extenders on the allen wrench, as excessive torque may break the the terminal.

CAUTION
Before making any connections to the power terminals, make sure that the negative (-) of the vehicle battery is disconnected.

LEDS indicators & protection system

• Blue LED steady on:
  Indicates that the amplifier is turned on.

• Flashing yellow LED: Excessive temperature (May be caused by obstruction of the internal fans, improper installation or poorly ventilated location).
  When the amplifier reaches the temperature of approximately 80°C (176°F), the thermal protection starts working, the audio is interrupted and the yellow LED will start flashing. The fans will be functioning, to cool down the components quickly. Only when the amplifier reaches a safe temperature level, the audio is released and the amplifier gets back to its normal functioning.
  We recommend don’t turn off the amplifier, so that the cooling time will be shorter, through the ventilation of fans.

• Blinking yellow LED according to music: Indicates that the amplifier is operating at the threshold of distortion. If the red LED also blinks, it indicates excessive distortion.

• Red LED steady on:
  Short-circuit or impedance lower than that supported at output.

• RED LED flashes 2x:
  Supply voltage less than 9V.

• RED LED flashes 3x:
  Power supply voltage greater than 16V.

Installation

CAUTION: All connections to power supply, input and output connectors must be carried out only with the amplifier off.

Recommended wire gauge & fuse

• Positive / negative power supply cable __2 x 1/0 AWG
• Output cables wire gauge____7 AWG
• Remote cable _____ 18 AWG
• Protection fuse or circuit breaker____450A

Calculated considering a maximum length of 4m. Distance greater than this, you will need to increase the cable gauges.

CAUTION
Using wire gauges below the recommendation will result in power loss and overheating of wiring. Check polarity and never reverse power supply cables due to the risk of damage to the amplifier.It is compulsory to install protection fuses or circuit breakers as close as possible to batteries.

Note: In the case of compression drivers and tweeters you must install a passive filter in the positive terminal of the same ones (Consult the transducer’s manufacturer manual).

• This equipment is not suitable for use in places where children may be present.

Technical features

• Rated power with 60Hz sinusoidal signal and THD <= 1%, with resistive loads, measured with Audio Precision APx525 audio analyzer or equivalent and the product at lower than 50°C case temperature and 12.6V supply voltage.
• Frequency response measured at dobre the impedance. The values as above are typical and may vary, due to electronic components tolerance or manufacturing process. For further information or questions, visit our website or contact TARAMPS support.

• www.taramps.com.br

References

• Taramps
• Taramps | WARRANTY & REPAIR CENTERS
• Taramps | Rede de Assistências Técnicas

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>