PELIPAL 980.835026 Bathroom Furniture Set Instructions
- June 15, 2024
- pelipal
Table of Contents
PELIPAL 980.835026 Bathroom Furniture Set
Product Information
Specifications
- Primary Connection: 980.835026
- Secondary Connection: 980.837026
- Power Watt: 980.839026
- Protection Class: 980.831126
- Lamp: LED
- Light Electricity: To be determined
- Light Color: To be determined
- Lifetime: To be determined
Product Usage Instructions
Facility
Please follow these steps for the installation of the LED-Mirror:
- Read the safety instructions, care instructions, and the instruction manual before starting the installation.
- Ensure that you have all the necessary tools and materials.
- Choose a suitable location for the mirror on the wall.
- Use suitable fixing materials (such as dowels) to securely mount the mirror on the wall, taking into consideration any obstructed electric lines within the wall.
- If needed, consult a certified electrical expert to connect the power supply in accordance with IEC 60364 and national regulations.
- Ensure that all power supply lines are properly installed and connected.
- Verify that the mirror is securely mounted and does not pose any risk of tipping or falling.
Cleaning and Maintenance
To clean and maintain the LED-Mirror, please follow these guidelines:
- Before cleaning, make sure to interrupt all power supply lines to the mirror.
- Use a soft, non-abrasive cloth and a mild household cleaner to clean the mirror surface.
- Avoid using harsh chemicals or abrasive materials that may damage the mirror or its finish.
- Do not spray liquids directly onto the mirror surface.
- Gently wipe the mirror surface in a circular motion to remove any dirt or smudges.
- Regularly check the power supply connections and ensure they are secure.
Disposal
When disposing of the LED-Mirror, please follow these guidelines:
- The packaging materials, including cardboard and labeled plastics, can be recycled. Please reuse or recycle these materials accordingly.
- Contact your local authority for further information on proper disposal methods.
FAQ
Q: What should I do if the LED-Mirror does not work properly?
A: If your mirror is not functioning properly, please contact your dealer for assistance.
Q: Can I replace the light source in the mirror?
A: No, the light source in the mirror is not interchangeable.
Attempting to replace it may void the warranty and result in damage to the
mirror.
Q: Can I install the mirror myself?
A: The installation of the mirror should be carried out by a certified electrical expert with knowledge of DIN VDE 0100-part 701 and national laws and rules. Improper installation may lead to safety hazards and void the warranty.
Dear Customer,
- we are glad that you have chosen our LED-Mirror.
- Our LED-Mirrors are subject to strict quality control. If your mirror still does not work properly, we regret this very much. Please contact your dealer.
- Please read the safety instructions, the care instructions as well as the instruction manual before the installation, and before the first commissioning.
- The observance of all above mentioned instructions are the prerequisite for a safe use and a long life of the mirror.
Package contents of
- 1 x LED-Mirror with LEDs, transformer and supply and wall mount
- 2 x screw for wall mount
specifications
- primary connection: 220 – 240 V, 50/60 Hz
- secondary connection: 12 V, Max 1 A, Max 15W
- power Watt: (50×70) max 15 W, (70×70) max 15 W (90×70) max 15 W, (110×70) max 15 W
- protection class: II / IP44
- lamp: LED
- light electricity: (50×70) 490lm, (70×70) 650lm, (90×70) 780lm, (110×70) 900lm
- light color: 6500 K
- lifetime: 30.000 h
WARNING: steam tension
- All power supply lines may be exchanged only by a certified electrical expert taking under the IEC 60364.
- The installation of the mirror may only occur to an electrical expert with knowledge of DIN VDE 0100-part 701 and national laws and rules.
- The source of light is not interchangeable.
- Structural changes and adjustments lead to the extinction of the guarantee and legal liability.
IMPORTANT note:
- By installation on the wall please respect the use of suitable fixing materials (dowels for right wall material) and in wall obstructed electric lines.
- Before cleaning the mirror, all stream power supplies should be interrupted.
- We recommend to mount the mirror with two persons to avoid any damages. Please do not place the mirror on hard sub-surface, because the edges and corners can burst by light connection to hard undergrounds.
Disposal methods
LED-Mirror
LED-Mirror, that are marked with the adjacent symbol must not be disposed of
with the trash.
You are required to dispose of such mirrors or electronic devices and
electronic waste separately – please dispose your LED-Mirror at your local
disposal company.
Packaging
The packaging of the mirror is made of cardboard and appropriately labeled
plastics that can be recycled. Please reuse these materials for recycling.
Further information on disposal can be obtained from your local authority. Enjoy our product!
Safety instructions
- Improper assembly of the furniture item can lead to accidents and injuries. The furniture item is only to be assembled by competent persons.
- In order to avoid tipping or falling, fasten the furniture item (including standing types) to the wall using the wall mount.
- Use the wall-plugs and hooks appropriate for your wall type.
- Connecting the power supply is only to be carried out only by a qualified technician and according to both IEC 60364 and the national regulations in force!
Mirrored surfaces
Please only clean the mirrored surfaces with a moist chamois leather and do
not use commercial glass cleaner.
Always wipe the edges of the mirror dry. Otherwise, coating flaws may develop.
INSTALLATION
Kontakt
service@twinland.de