XRIDONSEN XRAT40 Vehicle Strobe Lights Instruction Manual
- June 15, 2024
- XRIDONSEN
Table of Contents
XRIDONSEN XRAT40 Vehicle Strobe Lights
Product Information
Specifications
- Model: XYZ123
- Dimensions: 10″ x 5″ x 3″
- Weight: 1.5 lbs
- Material: Plastic
- Power Source: Rechargeable battery
- Battery Life: Up to 8 hours
- Charging Time: 2 hours
- Bluetooth Version: 4.2
- Wireless Range: Up to 30 feet
Product Usage Instructions
Charging the Device
To ensure optimal performance, it is recommended to fully charge the device
before first use. Follow these steps to charge the device:
- Connect the included USB cable to the charging port of the device.
- Connect the other end of the USB cable to a power source, such as a computer or wall adapter.
- The LED indicator on the device will light up in red, indicating that the device is charging
- Once fully charged, the LED indicator will turn green.
Pairing with a Bluetooth Device
The device can be paired with a Bluetooth-enabled device, such as a smartphone
or tablet. Follow these steps to pair the device:
- Make sure the device is charged and turned on.
- Enable Bluetooth on your desired Bluetooth-enabled device.
- In the Bluetooth settings of your device, search for available devices.
- Select the device with the name “XYZ123” from the list of available devices.
- If prompted, enter the passcode “1234” to complete the pairing process.
- Once paired, the LED indicator on the device will blink blue, indicating a successful connection.
Controlling Playback
The device allows you to control playback of your audio content.
Follow these instructions to control playback:
- To play or pause the audio, press the play/pause button located on the device.
- To adjust the volume, press the volume up or volume down buttons located on the device.
- To skip to the next track, press the next track button located on the device.
- To go back to the previous track, press the previous track button located on the device.
Frequently Asked Questions (FAQ)
-
Q: How long does the battery last?
A: The battery life of the device can last up to 8 hours on a full charge. -
Q: Can I use the device while it is charging?
A: Yes, you can use the device while it is charging. However, please note that it may take longer to fully charge the device if it is being used simultaneously. -
Q: Can I pair multiple devices with the device?
A: No, the device can only be paired with one Bluetooth-enabled device at a time. To pair with a different device, you will need to disconnect the current device first.
CHASE STROBE LIGHT STRIP Instruction Manual
SKU: XR-AT-40
SUPPIED PARTS
Package includes 1 strobe strip lights, 1 wireless remote, 6 zip-ties, 2 clear wiring snap Locks and 4 screws.
INSTALLATION
XRIDONSEN chase strobe light strip is very simple to install and use. Clean the position where the light strip need to be installed. Stick the strips and lock with the clear wiring snap locks to strengthen the fixation.
WIRING DIAGRAM
Wiring: Black wire to negative. Red wire to positive. White wire to
reverse light. Blue wire to brake light. Green and Yellow wire to turning
signals lights.
INSTALLATION EFFECT
WARM TIPS:
Prior to installation, please connect this LED tail light strip to a 12-volt
power source and test for full functionality.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. RF Exposure Information Tendered poet shouted be inset and is pa meets distance of 0 mm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>