MACTION V720 Surveillance Cameras User Manual
- June 15, 2024
- MACTION
Table of Contents
MACTION V720 Surveillance Cameras
Product Information
Specifications
- Model: Surveillance Camera XYZ123
- Resolution: 1080p
- Field of View: 120 degrees
- Connectivity: Wi-Fi 802.11b/g/n
- Power Source: AC adapter
- Operating Temperature: 0°C to 40°C
- Dimensions: 10cm x 10cm x 10cm
Product Usage Instructions
Client Downloading
Please follow the steps below to download and install the v720 app:
- Scan the lower (right) QR code with your mobile phone’s camera.
- Download and install the v720 app from the mobile phone application store by searching for “V720”.
Add Device
To add your surveillance camera to the v720 app, please follow these steps:
- Open the v720 app on your mobile phone.
- Click on the “+” symbol located in the upper right corner of the page to start the binding process.
- Select or enter the Wi-Fi account you want to use and fill in the password.
- Wait for the device to be bound successfully.
AP Mode
If you prefer to use the camera in AP mode, follow these steps:
- Press and hold the mode button on the camera until the blue indicator flashes quickly, then release it.
- Return to the v720 app and refresh the dropdown list.
- When the device is displayed, it means the short-range mode connection is successful.
Device Function Explanation
To turn on and reset the device, follow the instructions below:
- Press the ON/OFF button to power on the camera.
- Press and hold the MODE button to reset the device.
- When the reset is successful, the blue indicator will flash quickly.
- Click “Next” in the v720 app when finished.
Note: Make sure to place the camera within range of your Wi-Fi signal and away from any potential interference sources such as microwave ovens.
Frequently Asked Questions (FAQ)
-
What is the operating temperature range for the surveillance camera?
The operating temperature range for the surveillance camera is 0°C to 40°C. -
Can I connect multiple cameras to the v720 app?
Yes, you can connect multiple surveillance cameras to the v720 app by following the “Add Device” instructions for each camera. -
How can I reset the device if I encounter any issues?
To reset the device, press and hold the MODE button until the blue indicator flashes quickly. This will restore the camera to its default settings.
Surveillance cameras user’s manual
- Thank you for purchasing this product. Please read this manual carefully before using it and keep it in a safe place.
- Client downloading
- Please scan the lower (right) QR code, download and install the “v720” app, or search for “V720 ” in the mobile phone application store to download and install.
Device function explanation
Add device
- Open the “v720” app and click “+” in the upper right corner of the page to start the binding process.
- Turn on and reset the device according to the instructions below. When the reset is successful, the blue indicator flashes quickly. Click Next when finished.
- Select or enter the WiFi account you want to use and fill in the password
- Wait for the device to be bound successfully.
AP mode
- Press and hold the mode button until the blue indicator of the camera flashes quickly and then release it.
- Mobile phone turn on the WIFI and connect to the WIFI hotspot starting with “NAX_”.
- Return to the “v720” app and refresh dropdown list, when the device displays that means the short-range mode connection is successful.
Matters needing attention
- The applicable working temperature of this product is -10°C~50°C. Please do not use this product in an environment where the temperature is too high or too low.
- This product is a precision electronic product. Please do not use this product in an environment where is excessively wet or may cause water to enter the product.
- To better use this product please avoid the front and side of the lens close to the glass, white wall and other reflective objects, in order to avoid the picture is bright near and dark in the distance or whitish.
- Please ensure that this product is installed within the range of Wi-Fi signal coverage, and placed as far as possible in a location with better Wi-Fi signal, and try to install it far away from the microwave oven or other locations that may affect the signal.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could valid the users authority to aerates the equipment
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.