CAROL BTM-510C Bluetooth Transmission Adopter Instruction Manual

Bluetooth Module
Bluetooth Transmission Adapter BTM-510C Manual

Package Contents

Congratulations on your purchase of the BTM-510C Bluetooth Transmission Adapter. This manual is provided to help you understand the correct operation and obtain optimal performance, please read carefully before use.
BTM-510C Bluetooth adapter built with our fundamental design concepts for high quality, free of movement, convenient portability, easy to use, and low radio interference. Combining advanced Bluetooth technology, BTM-510C is a general wireless audio platform for dynamic and condenser microphones with an appealing appearance.
Please make sure the following items shown below are included in the package.

1+1 BTM-51 OCR + BTM-51 OCC Package

1. ∅6.3 male plug receiver
2. ∅3.5 female phone jack transmitter (Compatible with condenser microphone)
3. USB Type-A to Type-C Cable
4. Manual

1+2 BTM-51 OCR + BTM-510CD Package

1. ∅6.3 male plug receiver
2. XLR female plug transmitter (Compatible with dynamic microphone)
3. USB Type-A to Type-C Cable
4. Manual

Getting to know the BTM-510C Bluetooth Transmission Adapter

2.1Receiver(RX) adapterBTM-510CR

1. Ø6.3mm Male Plug
2. Power Buttom
3. LED Operation Indicator
4. LED Battery Indicator
5. USB Type-C Power Socket

2.2XLR transmitter(TX)adapterBTM-510CD

1. XLR Female Connector
2. Power Buttom
3. LED Operation Indicator
4. LED Battery Indicator
5. USB Type-C Power Socket
6. Usage Distance Switch

2.3Ø3.5transmitter(TX)adapterBTM-510BC

1. Ø3.5mm Female Connector
2. Power Buttom
3. LED Operation Indicator
4. LED Battery Indicator
5. USB Type-C Power Socket
6. Usage distance Switch

Operating Instructions

3.1Use of Product
3.1.1
Use one receiver (RX) adapter and one transmitter (TX) adapter, users will be able to transmit the sound from a dynamic (XLR Connector) or condenser(Ø3.5 Phone Plug) microphone to amplify! er through Bluetooth wireless adapter.

3.2LED Operation Indicator

battery indicator light flashes.

3.3 LED Battery Indicator

(1) The LED battery indicator! ashes once every 5 seconds when it turns on
(2) The LED battery indicator! ashes once every 1 second when it charging

3.4 OperatingInstruction
3.4.1Power On the adapter.

1. Charge the Bluetooth receiver (transmitter) to a working power level.
2. Press the button for 2 seconds to turn on the Bluetooth receiver (transmitter).
3. Greenlight will glow while the power is on. Then you can leave the button.
4. Bluetooth receiver (transmitter) will go into automatic connection mode.
5. When the battery is too low to maintain the operation of the device, press and hold the button will not be able to turn on, the operation indicator will not display a green light, and the battery indicator will! ash.

3.4.2Automatic Connection

1. Aer power is on, the adapter is in automatic connection mode.
2. Bluetooth receiver (transmitter) will search for nearby Bluetooth devices while the red light and green light! ash alternatively.
3. If the devices have not been paired, short press the button 5 times, the device will! ash red light 5 times. An er than, the red and green lights! ash alternately to enter the automatic pairing mode again.

3.4.3 Sound Transmission

1.  When the Bluetooth receiver (transmitter) is in automatic connection mode! and Bluetooth device for sound transmission, Bluetooth receiver (transmitter) will automatically be in sound transmission mode.
2. In sound transmission mode, the transmitter (TX) can transmit a sound signal to the receiver(RX). Greenlight will! ash once every three seconds.
3. During use, the distance adjustment switch on the side can be used to adjust the appropriate power consumption and transmission distance. Upward is a long transmission distance (high power consumption), and downward is a short transmission distance (low power consumption).

3.4.4Power O the adapter (Low power warning)

1. When the Bluetooth receiver (transmitter) is on, press the button for 2 seconds to turn it o (red light will glow still you leave button).
2. When Bluetooth receiver (transmitter) detects low battery power, red light and green light will! ash once every 2 seconds, the battery should be charging soon. If the battery are not been charged, the adapter will cut the power.

3.3.7OperatingProcedures

Troubleshooting

1. Make sure that battery power is so ancient.
2. If power still cannot be turned on. Please power OFF, then Power ON for 10 seconds.

Unable to connect|

1. Turn on the receiver (RX) first, transmitter (TX) later.
2. Except receiver (RX) and transmitter (TX), turn all unrelated Bluetooth devices within active distance.
3. short press the button 5 times. The device will flash red light 5 times to prepare. Repaired is required for the receiver (RX) and transmitter (TX) both.

Specifications

5.1 Bluetooth Standard: BLE (Bluetooth Low Energy) 5.1
5.2 Output Power: Class 1
5.3 Transmission Distance: 20 meters (Unobstructed line of sight)
5.4 Battery: Lithium battery 3.7V 400mAH
5.5 Battery Life: Approximately 8 hours(downward mode)
5.6 Battery Charging time: Approximately 2 hours
5.7 BTM-510CR Receiver (RX) is equipped with 06.3 Phone Plug
5.8 BTM-510CD Transmitter (TX) is equipped with XLR Connector, compatible with dynamic microphone
5.9 BTM-510CC Transmitter (TX) is equipped with 03.5 Phone Jack, compatible with condenser microphone
5.10 Carrier Band Frequency: ISM band 2.400-2.480GHz
5.11 Transmit Power: +10dBm
5.12 Receive Sensitivity: -94dBm
5.13 Maximum Output Voltage: 900mVpp
5.14 Maximum Current Consumption: 80mA
5.15 Frequency Response: 16∼22KHz(BTM-510CC) 16∼22KHz(BTM-510CD)

Special Notes

6.1 It is recommended to charge the battery when there is one bar le to avoid battery damage caused by over-discharge of the battery voltage.
6.2 Receiver (RX) can only receive sound signals from one transmitter(TX) and cannot receive signals simultaneously from two or more transmitters (TX)
6.3 When charging, please use a non-fast charging device and a USB standard mobile power supply or other qualified USB power supply device
6.4 Prohibition of use close to fire or in a car where the temperature may be above 60°C. Also do not charge/discharge in such conditions.
6.5 Do not disassemble the product.
6.6 Keep the product, package, and parts away from the children and pets as these objects are hazardous to swallow
6.7 Please avoid placing the product in a dirty, high temperature, low temperature, high humidity, or direct sunlight environment to avoid product damage; high and low-temperature environments will cause the battery’s storage capacity to permanently decrease.+
6.8 Stop using the product abnormal heat, odor, breakage, deformation, or abnormal condition is detected during use, charge, or storage.
6.9 Stop Charging the product if charging is not completed within the specified time.
6.10 If the product is used for a long time, the storage capacity of the battery will decrease due to the aging of the battery, which is normal.

Brand : CAROL
Name : BLE True Sound low Latency Chargeable Audio
Transmission Adapter
Model : BTM-510CR / BTM-510CD/ BTM-510CC
FCC ID : G4RBTM-510C

FCCStatement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Changes or more! cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

https://www.taiwancarol.com/

TAIWAN CAROL ELECTRONICS CO., LTD.
No.202 Tung Kuang Road, Taichung, Taiwan
Tel: +886-4-22347677 Fax:+886-4-22348698
Email: [email protected]
http://www.taiwancarol.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>