EGGKITPO EGG-360 Commercial Electric Griddle Instructions

DESIGNED AND MANUFACTURED FOR COMMERCIAL KITCHENS

EGG-360 Commercial Electric Griddle

EGGKITPO Commercial Electric Griddle

Model :

EGG-360
EGG-360D
EGG-14B
EGG-14D| EGG-24B
EGG-24D
EGG-818
EGG-818D| EGG-818-2
EGG-820
EGG-820D
EGG-820-2
---|---|---

Please carefully read this manual before using this product.
Make sure you are familiar with all of the safety and usage instructions.
Keep this manual in a safe place for future reference.

IMPORTANT SAFEGUARDS

1. READ ALL INSTRUCTIONS.
2. To protect against risk of electric shock, do not put appliance in water or other liquids.
3. Do not touch surfaces that may be hot. Use handles and knobs provided.
4. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
5. Avoid contact with movingparts.
6. Do not operate the Commercial Griddle or any other electrical equipment with a damaged cord or plug, or after the unit malfunctions, or is dropped or damaged in any manner. Return it to the nearest Authorized Service Center for examination, repair, and/oradjustment.
7. The use of attachments not recommended may cause fire, electric shock, or injury.
8. Do not use outdoors.
9. Always check that the temperature dial is in the OFF position before plugging cord into wall outlet. To disconnect, turn the temperature dial to OFF, then remove plug from wall.
10. Do not place near a hot gas or electric burner or heated oven.
11. Do not let cord hang over edge of table or counter, or touch hot surfaces.
12. When in ON position, the Commercial Griddle should always be on a stable counter-top or table.
13. Do not use appliance for other than intended use.
14. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
15. Children should be supervised to ensure that they do not play with the appliance.

NOTES ON THE PLUG
This appliance has a grounded 3-prong plug. Connect to a properly grounded outlet only. If the plug does not fit fully into the outlet, contact a qualified electrician. Do not attempt to modify the plug in any way.

| EGG-360, EGG-360D, EGG-14B,EGG-14D
–120V 1800W; NEMA 5-15 PLUG ETLus,need 5-15R Receptacles accordingly!
---|---
| EGG-24B,EGG-24D，EGG-818,EGG- 818D,EGG-820,EGG-820D
–240V 3500W; NEMA 6-15 PLUG ETLus, need 6-15R Receptacles accordingly!

NOTES ON THE CORD
A short power supply cord has been provided to reduce the hazards resulting from becoming entangled in or tripping over a longer cord. An extension cord may be used with this appliance if care is properly exercised in its use. If an extension cord is used, the marked electrical rating of the extension cord must be at least as great as the electrical rating on this appliance. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or another person or tripped over accidentally.

ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances.
ADJUSTABLE FEET INSTALLATION(FOR models shipped with feet un-assembled ONLY)
Ensure that all feet are installed correctly before operation of this griddle.
Your griddle includes four adjustable feet, that are packaged unattached. Each foot has a screw protruding from the top for assembly. Locate the four screw holes at each corner of the bottom housing of the griddle.
Insert the screw and turn foot clockwise until snug.
Repeat for all four feet. The height of the feet can be adjusted by rotating the bottom of the foot. Ensure that all four feet are adjusted to the same height to make a level cooking surface.

Operating Instructions:

Before first use,

1. Remove Commercial Griddle frompackaging.
2. Place on a firm and stable surface.
3. Remove all packaging and instruction book.
4. Please read all instructions before you begin to cook.
5. Keep this instruction book in a safe location for future reference.
6. It is highly recommended that you clean the griddle before first use.Use a damp cloth to wipe out the anti-rust oil on the surface of griddle cooking plate(the oil is topreventthe grill plate fromrusting,it’s nota sign of used)
7. After cleaning, the Commercial Griddle is ready for use.Before initial use turn the thermostatic control to the medium setting( 200°F). Allow to heat and burn-in for approximately 30-minutes. This will allow all oils and other sediment to burn off.You may see smoke coming from the grill plates when the machine is first switched on, this is normal.The Griddle may emit a slight odor. This is normal and will quickly dissipate. Season the griddle surface: (first use and after weeklycleaning) Allow the unit to cool or heat to a warming temperature of approximately 200°F. Rub cooking oil, shortening, beef suet, or the like on the griddle surface with a clean cloth. Heat the griddle to 350 – 400 °F and allow it to operate for approximately 20 minutes. Then turn the temperature dial down to approximately 200°F and allow the surface to cool to the set temperature. Remove any excess oil and wipe clean. Repeat the process; oil, heat for 30 minutes, cool, and wipe clean.

Daily:
Preheat the unit to desired cooking temperature. Prior to cooking, lightly oil and wipe the surface clean to remove any contaminants that may have accumulated or seeped from the surface and/or perimeter since last use and to assure a clean non-stick cooking surface.
please check whether the voltage of power supply is in conformity with that in the rating plate(which is on the back of the machine), the body must be earthed properly. It is forbidden to put the tinder and explosive object near the machine. And keep it in the environment with the superior ventilation system.

Operating steps:

1. Place the machine firmly, connect the power, and then the green power indication light turns on. Adjust the working temperature to the required one,heating light turns on, the heating element is working.
2. When the temperature reaches the preset one, the yellow light will turn off, then it will turn into the thermostat state, the user can start to work. When the temperature comes down, the thermostat will start working again automatically. This process is cycling repeatedly, guarantee the temperature is on the set up scope.
3. Grills with two thermostats( EG-24 Series &EG-820 Series) features independent controls per half heating zone,creating two independent stations in oneunit.
4. When the food is ready, the user can take out gently with the spatula provided, avoid using metal to roll up or take out the food, otherwise it will hurt the surface of heating plate.
5. The oil drip tray can be used to collect the remaining oil or grease , it should be cleaned out frequently to avoid overflow.

Technical Specification:

Model No.| Power| Hot plate surface| Voltage| Dimension(mm)| Plug Type
---|---|---|---|---|---
EGG-360| 1.8kW/15Amps| Full Flat| 120V| 360450220| NEMA 5-15P
EGG-360D| 1.8kW/15Amps| Chrome plated| 120V| 360450220| NEMA 5-15P
EGG-14B| 1.8kW/15Amps| Full Flat| 120V| 357518250| NEMA 5-15P
EGG-14D| 1.8kW/15Amps| Chrome plated| 120V| 357518250| NEMA 5-15P
EGG-24B| 3.5kW/14.58Amps| Full Flat| 240V| 610540253| NEMA 6-15P
EGG-24D| 3.5kW/14.58Amps| Chrome plated| 240V| 610540253| NEMA 6-15P
EGG-818| 3.5kW/14.58Amps| Full Flat| 240V| 560460250| NEMA 6-15P
EGG-818D| 3.5kW/14.58Amps| Chrome plated| 240V| 560460250| NEMA 6-15P
EGG-820| 3.5kW/14.58Amps| Full Flat| 240V| 731520230| NEMA 6-15P
EGG-820D| 3.5kW/14.58Amps| Chrome plated| 240V| 73 1520230| NEMA 6-15P

Remarks: There are 3 types of griddle surface full flat,chrome plated(Model No. ends with a “D”) and 1/3 chrome plated/balance flat(Model No. ends with a “-2”).All in all,if the item you bought is not listed in the specification or any other places in this manual,please refer to the items with Similar Model No. for operation information.For example,EG-360,EG-360D are identical on the function perspective.

Care and Maintenance:

Daily
After each day, with the griddle hot (300F), rub the griddle clean with a grill brush or grill brick. Do not use cleaning chemicals or soaps as these can be absorbed by the surface and/or seep into the perimeter of the griddle and affect the flavor of the food. If necessary, use only clean water, oil, and/or a food grade degreaser for the cleaning process. Remove and empty the grease container, clean the grease trough and exterior of the unit. Allow the unit to cool and apply a thin coating of cooking oil if necessary to prevent corrosion.

Weekly
Perform the daily cleaning process. Allow the griddle to cool completely and thoroughly clean the griddle plate with a food grade degreaser. Do not use cleaning chemicals or soaps as these can be absorbed by the surface and/or seep into the perimeter of the griddle and affect the flavor of the food. Season the griddle per the instructions in the Start-up section. Do not allow the griddle to remain unseasoned or without a thin coating of cooking oil to prevent corrosion.

SAFETY AND TROUBLESHOOTING

Possible troubleshooting chart

properly.
2. Fuse has blown| 1. Remove plug and insert correctly.
2. Replace suitable fuse
Thermostat indicator not working and Griddle not heating up.| 1. Safety overheat stat maybe activated
2. Connection to heating element faulty.
3. Heating element is faulty.| 1. Press the safety reset button on the back of the machine, check and service the machine. Contact a qualified technician or an authorized dealer ifsafety reset repeatedly needs resetting during normal use.
2. Contact a qualified technician or an authorized dealer for heating element connection fault.
3. Contact a qualified technician or an authorized dealer for heating element fault.
Power indicator on but fryer not heating up.| Temperature control is faulty.| Contact a qualified technician or an authorized dealer.
Temperature control is working but power indicator is not on.| Power indicator is faulty| Contact a qualified technician or an authorized dealer.
After heating up, heating element no longer seems to be maintaining temperature.| Overheat facility has cut in| Push the reset button at the back ( or front) of the fryer.

Circuit Diagram:

Symbols and Wording Explanation:

HL1: Power Indicator
HL2:Heating Indicator
HL3:Power Indicator
HL4:Heating Indicator
EH: Heating element
EH1：Heating Element| EH2:Heating Element
SA：Main Switch
ST2: Thermostat
ST1:Thermal cutoff to avoid overheating
ST4: Thermostat
ST3:Thermal cutoff to avoid overheating
---|---

Features and Controls.

Electric Griddle Parts EGG-360 and EGG-360D:

1. Main Switch
2. Power indicator (green)
3. Thermostat indicator (yellow)
4. Temperature Control knob
5. Drip Tray
6. Griddle plate

Electric Griddle Parts EGG-14B and EGG-14D:

1. Temperature Control knob
2. Thermostat indicator (yellow)
3. Power indicator (green)
4. Drip Trough
5. Handle
6. Griddle plate
7. Adjustable feet

Electric Griddle Parts EGG-24B and EGG-24D:

1. Temperature Control knob
2. Thermostat indicator (yellow)
3. Power indicator (green)
4. Temperature Control knob
5. Thermostat indicator (yellow)
6. Power indicator (green)
7. Griddle Plate
8. Drip Trough
9. Griddle Handle
10. Adjustable feet
11. Drip Tray-under the drip trough

Electric Griddle Parts EGG-818 and EGG-818D:

1. Temperature Control knob
2. Thermostat indicator (yellow)
3. Power indicator (green)
4. Drip Tray
5. Drip Trough
6. Griddle plate

Electric Griddle Parts EGG-820 and EGG-820D:

1. Temperature Control knob（Right side)
2. Thermostat indicator (yellow)(Right Side)
3. Power indicator (green)(Right Side)
4. Temperature Control knob(Left Side)
5. Thermostat indicator (yellow)(Left Side)
6. Power indicator (green)(Left Side)
7. Drip Tray
8. Main housing
9. Drip Trough
10. Griddle plate

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>