MILLER E6EB Downflow Upflow Electric Furnace Instructions

TECHNICAL
SPECIFICATIONS

E6EB Downflow Upflow Electric Furnace

E6EB-xxx-H Series
Downflow, Upflow
Electric Furnaces
The E6 Series furnace is designed for all sizes ofmanufactured and modular homes. These units incorporate reliability and low maintenance. Units may be installed free standing in a utility room or enclosed in an alcove or closet. E6 Series furnaces are A/C ready, with multiple blower combinations for cooling requirements. FEATURES and BENEFITS

• Choice of Air Conditioning Options: From 1.5 to 5 tons A/C ready.
• Easy Open Door: Secures the door firmly for transit, yet allows easy removal for access.
• Effective Air Filter: Universal disposable filter is readily available and simple to replace.
• Nichrome Heating Elements: Provide long lasting, efficient heating.
• Appliance Quality Door: Protects against rust and other corrosion. Baked enamel finish allows for easy cleaning.
• Fully Insulated Cabinet: Insures minimized heat loss and quiet operation.
• Safety and Dependability: Auto reset controls protect unit’s electrical circuitry and helps ensure trouble freeperformance. Built in circuit breakers for extra safety.
• Adaptable: Unit can be adapted to provide dependable heating in either downflow or upflow mode.
• Versatile: Works with self-contained or split system air conditioners or heat pumps.
• Heating Relays: Provide quiet operation.
• Control Board: Eliminates need for additional cooling relay kit.
• Full line of accessories to meet many difficult applications.

MODEL IDENTIFICATION

Furnace Parts Identification Optional Accessories

UNIT SPECIFICATIONS

Rated Heating Output, Btuh
(see note 1)| 35,000| 41,000| 53,000| 57,000| 70,000| 75,000| 75,000
Watts (Total kw, Heating
Elements and Blower)| 10.4| 12.0| 15.4| 16.6| 20.4| 22.0| 22.0
Supply Voltage| 240 Volts/60Hz/1-Phase
Heating Elements,
No.(Total kw)| 2 (10.0)| 2 (11.6)| 3 (15.0)| 3 (16.2)| 4 (20.0)| 4 (21.6)| 4 (21.6)
Blower Wheel Size| 10.5″ Dia, 8″ Wide| 11” Dia., 8” W
Motor Speed,
H.P. Rating, Amps| 4 Speed, 1/3 HP, 2.9| 4 Spd, 3/4HP
3.8 Amps
Test ESP, in. w.c. Max| 0.3
Optional Cooling Available with factory installed blower| 2.0 – 4.0 Ton| 2.0 – 5.0 Ton
Optional Heat Pump Available with factory installed blower| 2.0 – 4.0 Ton
Air Filter (Standard)| 18” x 20” x 1” (nominal)
Furnace Dimensions| Width-20” (508mm),  Height-29” (737mm) (see note 2), Depth-24 1/2” (623mm)

1. Heating output rated at listed voltage. For outputs at voltages other than 240V, multiply Btuh rating by the following factors: x 0.92 (230V), x 0.84 (220V), x 0.75 (208V)
2. Height is 56″ with return air grille installed, 58″ with coil cabinet and 72″ with coil cabinet and upflow stand.

ELECTRICAL SPECIFICATIONS

Model Number E6E(*)| Supply Circuit| Total Amperes| Maximum Over-current Rating| Minimum Circuit Ampacity
---|---|---|---|---
-010H| Single| 44.6| 60| 56
-012H| Single| 51.2| 70| 64
Dual “A”| 27.1| 40| 34
Dual “B”| 24.2| 30| 30
-015H| Single| 65.4| 90| 82
Dual “A”| 44.6| 60| 56
Dual “B”| 20.8| 30| 26
-017H| Single| 70.4| 90| 88
Dual “A”| 47.9| 60| 60
Dual “B”| 22.5| 30| 28
-020H| Single| 86.2| 125| 108
Dual “A”| 44.6| 60| 56
Dual “B”| 41.7| 60| 52
-023H| Single| 93.8| 125| 117
Dual “A”| 45.5| 60| 57
Dual “B”| 48.0| 60| 60

Anticipator Settings

Clearances

‡ Service Clearance
† For upflow application using upflow stand, 1″ minimum per side.

AIRFLOW DATA

E6EB (010, 012, 015, 017, 020, 023) H

Coil| High| Med High| Med Low| Low
4-ton| 3.5 ton| 3-ton| 2.5-ton
Static (ESP) in W.C.| 0.1| 1559| 1389| 1227| 923
0.2| 1506| 1352| 1208| 906
0.3| 1460| 1310| 1170| 880
0.4| 1401| 1260| 1136| 845
0.5| 1333| 1198| 1086| 805
0.6| 1251| 1133| 1027| 757
E6EB 023H-5 TON and 5 ton accessory blower

Coil| High| Med High| Med Low| Low
5-ton| 5-ton| 5-ton| 5-ton
Static (ESP) in W.C.| 0.1| 1911| 1709| 1394| 1054
0.2| 1860| 1663| 1359| 1027
0.3| 1790| 1620| 1320| 990
0.4| 1741| 1563| 1279| 952
0.5| 1671| 1511| 1229| 912
0.6| 1613| 1444| 1182| 864

ACCESSORIES

ACCESSORY KITS

GENERAL TERMS OF LIMITED WARRANTY
Nortek Global HVAC, LLC will furnish a replacement for any part of this product which fails in normal use and service within the terms and conditions of the warranty.
For complete details of the Limited Warranty, including applicable terms and conditions, see your local installer or contact the Nortek Global HVAC, LLC warranty department for a copy.
Before purchasing this appliance, read important energy cost and efficiency information available from your retailer. Specifications and illustrations subject to change without notice and without incurring obligations. Printed in U.S.A (03/2018)

115F-0318
www.millerac.com
Trademark Miller® used under license.
© Nortek Global HVAC, LLC. All Rights Reserved.

References

• TCPDF

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>