MILLER E7 Series Electric Furnaces Gas User Manual

MILLER E7 Series Electric Furnaces Gas

The E7 Series furnace is designed for all sizes of manufactured and modular homes. These units incorporate reliability and low maintenance. Units may be installed free-standing in a utility room or enclosed in an alcove or closet. E7 Series furnaces are A/C ready, with 16 blower speeds to meet any cooling requirement.

FEATURES and BENEFITS

• Choice of Air Conditioning Options: From 1.5 to 5 tons A/C ready.
• Easy Open Door: Secures the door firmly for transit, yet allows easy removal for access.
• Effective Air Filter: A universal disposable filter is readily available and simple to replace.
• Nichrome Heating Elements: Provide long-lasting, efficient heating.
• Appliance Quality Door: Protects against rust and other corrosion. The baked enamel finish allows for easy cleaning.
• Fully Insulated Furnace Cabinet: Insures minimized heat loss and quiet operation.
• Safety and Dependability: Auto reset controls protect the unit’s electrical circuitry and help ensure trouble-free performance. Built-in circuit breakers for extra safety.
• Adaptable: The unit can be adapted to provide dependable heating in either downflow or upflow mode.
• Versatile: Works with self-contained or split system air conditioners or heat pumps.
• Heating Relays: Provide quiet operation.
• Control Board: Allows for 16 blower speeds to create ideal comfort in the home.
• 7 Segment LED Display: Shows furnace mode and simplifies service.
• Upflow/Downflow Furnace (E7EM): Available to meet any application.
• Upflow (E7EU) and Downflow (E7ED) Furnace: Comes with a factory-installed coil box and all necessary filters.
• Full line of accessories to meet many difficult applications.

MODEL IDENTIFICATION

Furnace Parts Identification

UNIT SPECIFICATIONS

1. Heating output rated at listed voltage. For outputs at voltages other than 240V, multiply Btuh rating by the following factors: x 0.92 (230V), x 0.84 (220V), x 0.75 (208V)

ELECTRICAL SPECIFICATIONS

FURNACE MODELS E7-| 010H| 012H| 015H| 017H| 020H| 023H
---|---|---|---|---|---|---
Rated Heating Output, Btuh (see note 1)| 35,000| 41,000| 53,000| 57,000| 70,000| 75,000
Watts (Total kw, Heating Elements & Blower)| 10.4| 12.0| 15.4| 16.6| 20.4| 22.0
Supply Voltage| 240 Volts/60Hz/1-Phase
Heating Elements, No. (Total kw)| 2 (10.0)| 2 (11.6)| 3 (15.0)| 3 (16.2)| 4 (20.0)| 4 (21.6)
Motor Speed, H.P. Rating, Amps| 16 Speed, 1/2 HP, 3.6 A
Test ESP, in. w.c. Max| 0.3
Optional Cooling Available with factory factory-installed blower| 2.0 – 4.0 Ton
Optional Heat Pump Available with factory-installed blower| 2.0 – 4.0 Ton
Air Filter (Standard)| 18″ x 20″ x 1″ (nominal)

Furnace Dimensions

| Multi-Poise| Width-20″ (508mm), Height-29″ (737mm), Depth-24 1/2″ (623mm)
Upflow/ Downflow| Width-20” (508mm), Height-60 5/8” (1546mm), Depth-24 1/2” (623mm)

NOTE
Wire size must be under the applicable revision of the NEC and all other applicable codes.

Anticipator Settings

Furnace Model

010, 012
015, 017, 020, 023

Clearances

• Service Clearance
• For upflow applications use an upflow stand, 1″ minimum per side.

E7EM Physical Dimensions

E7EU & E7ED Physical Dimensions

Optional Accessories

Coil Box| Dimension A Width (mm)| Dimension B Depth (mm)| Dimension C Height (mm)
---|---|---|---
1006730| 20″ (508mm)| 24″ (610mm)| 31.5″ (802mm)
1006731| 20″ (508mm)| 24″ (610mm)| 31.5″ (802mm)
904067| 20″ (508mm)| 24″ (610mm)| 27″ (686mm)
902976| 20″ (508mm)| 24″ (610mm)| 29″ (736mm)

Airflow Data

AIRFLOW (CFM)

MODEL NUMBER

| MOTOR SWITCH SETTINGS (0=OFF, 1=ON)| EXTERNAL STATIC PRESSURE (IN. W.C.)
0.1| 0.2| 0.3| 0.4| 0.5| 0.6
1/5| 2/6| 3/7| 4/8| CFM| CFM| CFM| CFM| CFM| CFM

E7E*-0**H1

| 0| 0| 0| 0| 685| 640| 606| 560| 513| 460
1| 0| 0| 0| 770| 727| 692| 648| 599| 552
0| 1| 0| 0| 854| 815| 779| 737| 685| 645
1| 1| 0| 0| 939| 902| 865| 825| 771| 737
0| 0| 1| 0| 1,012| 974| 938| 899| 850| 813
1| 0| 1| 0| 1,084| 1,047| 1,011| 973| 930| 888
0| 1| 1| 0| 1,157| 1,119| 1,084| 1,047| 1,009| 964
1| 1| 1| 0| 1,197| 1,166| 1,130| 1,093| 1,056| 1,017
0| 0| 0| 1| 1,245| 1,215| 1,178| 1,143| 1,105| 1,066
1| 0| 0| 1| 1,293| 1,263| 1,225| 1,192| 1,154| 1,114
0| 1| 0| 1| 1,344| 1,312| 1,278| 1,242| 1,206| 1,169
1| 1| 0| 1| 1,394| 1,361| 1,330| 1,291| 1,257| 1,223
0| 0| 1| 1| 1,434| 1,401| 1,369| 1,332| 1,299| 1,267
1| 0| 1| 1| 1,473| 1,441| 1,408| 1,373| 1,340| 1,311
0| 1| 1| 1| 1,514| 1,483| 1,451| 1,417| 1,386| 1,355
1| 1| 1| 1| 1,555| 1,525| 1,494| 1,460| 1,431| 1,398

NOTES

1. Motor switch settings for heating speeds use HEAT switches 1, 2, 3, and 4. For cooling speeds use COOL switches 5, 6, 7, and 8.
2. Data is shown with a filter

E7 Airflow Data

*E7E- 0H1

| MAXIMUM HEATING AIRFLOW SETTING
---|---
E7EM| E7ED| E7EU
DOWNFLOW| UPFLOW| DOWNFLOW| UPFLOW
MH| RES| MH| RES| MH| RES| MH| RES
10|

0001

| 0101| 0001|

0101

|

0101

|

0101

|

0101

|

0101

12| 0011|

0101

15|

0101

17
20
23| 0011| 0001| 0011| 0001| 0011

NOTES

1. MH and Res represent Manufactured Housing and Residential (modular home) applications, respectively
2. To comply with government-mandated efficiency standards, speed settings with higher CFM values than those listed in this table are not allowed in HEAT mode

ACCESSORIES

ACCESSORY KITS

For complete details of the Limited Warranty, including applicable terms and conditions, see your local installer or contact the Nortek Global HVAC, LLC warranty department for a copy. Before purchasing this appliance, read important energy cost and efficiency information available from your retailer. Specifications and illustrations are subject to change without notice and without incurring obligations. Printed in U.S.A (06/2021)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>