Paklite 52.0401.0121 LED Flood Light Outdoor with Stake User Manual

Paklite 52.0401.0121 LED Flood Light Outdoor with Stake

Specifications

• Model : 52.0401.0121
• Power : 15W
• Version : V1.1
• Dimensions : 80x116mm
• Weight : 105g

Bluetooth RGBCW Lamp

The Bluetooth RGBCW Lamp is a versatile LED lamp that allows you to control the color temperature, brightness, and various lighting effects using your mobile phone. It features a dimmable white light, DIY RGB light, DIY scene mode, timer setting, music sync, and auto-on/off functionality.

Bluetooth RGBCW Lamp

LED RGBCW Lamp User Guide

THANK YOU for your choice. For your better usage experience, please install and use the light according to the following instruction.

PRECAUTION

1. This product can not be connected to a dimmer, otherwise it will not work properly.
2. The connection distance between the mobile phone and the lamp depends on the Bluetooth chip of the mobile phone, that is, different mobile phones have different connection distances.
3. It is recommended that the distance between your phone and the lamp is less than 30ft (no obstruction in the middle), subject to actual use.
4. One mobile phone can add up to 14 lights. Setting more lights requires removing several lights that have already been set.

• DO NOT USE UNDER WATER.

THE PHONE MUST IN CLOSE PROXIMITY TO THE LIGHTS FOR THE FOLLOWING TASKS

1. Add device
   The distance between the phone and the lights is recommended to be within 20ft and without any large obstacles in between.

2. Set timing
   The distance between the phone and the lights is recommended to be within 20ft and without any large obstacles in between.

• The effective distance may vary depending on the phone.

Specification

 Installation

1. Step: Insert the small hexagon head screw into the round hole in the bracket.
2. Step: Match the small hole on the cone to the bottom of the screw and tighten the cone clockwise along the threads.

Installation (Panel not included, only for demonstration)

1. Step: According to the spacing of two screw bits on the bracket, drill two holes on the mounting panel.

2. Step: Aim the bracket at the holes and fix it with two bolts.

3. Step: Adjust the lighting direction up or down as per your need and plug in to power the light on.

• 01 Make sure that the distance between the light and the object being lit is more that 1 meter. so as to avoid high temperature caused by short distance.

TIPS

• Walls, metals, etc. will severely shorten the distance of signal transmission.
• If a lamp is completely out of control, it may be that the distance between the lamp and the nearest lamp is greater than 30FT.
• One group can add up to 4 lights, more than 4 lights may cause lag and cannot be controlled normally.
• There is no need to connect to the network when using this APP so the status cannot be displayed completely accurately and in time.

INDIVIDUAL LIGHT MODE

Tips

• The Android system requires access to the location information to be turned on in order to perform the Bluetooth scanning function. loss system does not require the access to the location information.
• To access the user privacy protection agreement, please click the  symbol on the home page of the app

Choose to add fixtures

Waiting for connection

Dimmable White Light: Color temperature and brightness adjustment

DIY RGB Light: Choose one color you like.

DIY Scene Mode : Must Go to Individual Light Mode and Choose the Scene Part. Include 7 Preset Scenes and DIY Color Changing Mode(Brightness and Speed Adjustable)

Music Sync: No Need to Import Music to App, One Click to Start Music Party.

Timer Setting: Must Go to Individual Light Mode and Keep Your Phone Near the Lamp When You Set the Timing and Save It. Then the Lamp Will Turn Off/On at the specified time.

Auto-On/Off When Connected/Disconnected: Click “in the Upper Right Corner of Your Phone. Then Choose On/Off As Your Need.

GROUP CONTROL

Note

• One Group can Add Up to 4 Lights.
• DIY Scenes Please Go to individual Light Mode.
• Timer Setting Please Go to individual Light Mode.

Steps for Group Light Connection

1. Click the “+” sign in the middle of the app.
2. Choose the lamps(no more than 4) that have connected with phone in individual light mode.
3. Name it as “Group One” and save it.

Kind tips
What if the app cannot control the light?

1. Please reboot the Bluetooth of the mobile phone.
2. Please be close to the light and try again. What if the app displayed connected

with the light but still cannot control it?

1. Please try to be close to the light.
2. 4 lights are the best for APP group control, too many lights may cause lag and cannot be controlled normally

What if the” Smart Life” App cannot connect with the light?

1. Re-download the app and re-install. 2. Please try using another mobile phone

Manufacturer : SHENZHEN BLING LIGHTING TECHNOLOGIES CO.,LTD Address: 3rd Floor, Bidg A, China National Nuclear Corporation Industrial Park,Qiyu Rd, East of Baishixia, Fuyong Bad an Dist Shenzhen Guangdong 518103 China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>