unitronic AIR Plus K-2068E Remote Control for Air Conditioners Instructions
- June 15, 2024
- unitronic AIR Plus
Table of Contents
unitronic AIR Plus K-2068E Remote Control for Air Conditioners
Instant search by Brand
Note: The air conditioner must be on, if it is off, turn it on manually.
- Hold down the button corresponding to the brand as shown in the following table for at least 8 seconds, until the conditioner lights up; release the button.
Direct code entry
Note: The air conditioner must be switched off. If it is switched on,
turn it off manually.
- Look for the air conditioner brand in the code table.
- Keep the SET key pressed and then keep the ON/OFF key pressed until the code on the remote control display starts flashing; release the keys.
- Press the TEMP + and TEMP- keys to display the first code found in the table and press the SET key.
- Check that all functions are performed correctly, if not, try another code by repeating points 2 and 3.
Automatic Search
Note: The air conditioner must be switched off. If it is switched on, turn it off manually.
- Hold down the SET key for at least 6 seconds, and the symbol — starts blinking on the display, DON’T release the key.
- As soon as the conditioner turns on release the key.
- Verify if the code works correctly, if it does not work correctly repeat the procedure from step 1.
Manual Search
- Keep the eider presses the swine the on wife pressed, of at least seconds, until the code on the remote
- Press the TEMP + key and confirm that the air conditioner is on, otherwise press the TEMP + key again to switch to the next code. Press the SET button to confirm the code after trying all the functions.
Maximum Minimum Temperature
Maximum and minimum temperature block
- Hold down the SET button and simultaneously press the °C/°F button for at least 3 seconds, until the sun icon starts flashing; release the keys.
- Use the TEMP + and TEMP- buttons to set the maximum temperature and press SET to confirm.
- Hold down the SET button and simultaneously press the TEMP- button for at least 3 seconds, until the
- Use the TEMP + at TEMP tons to set the minimum temperature and press SET to confirm.
Unlocking of the maximum and minimum temperature
- Keep the MODE key pressed and at the same time press the M.SWING key, until the temperature indicator flashes; release the keys.
Fan Speed Lock
- Hold down the SET button pressed and and simultaneously press the TIME OFF for at least 3 seconds, until the currently set speed starts flashing; release the keys.
- Use the FAN button to set the desired speed, and press SET to confirm.
Unlocking the Fan Speed
- Keep the MODE key pressed and at the same time press the FAN key, until the speed indicator flashes; release the keys.
Timer On/Off
Note: This function is available only for the conditioners that have it on the original remote.
- Press the TIME ON or TIME OFF buttons, the timer indicator is displayed and the conditioner is now in the timer state.
- Clock – Press and hold the SET button and simultaneously the MODE button. With the TEMP+ and TEMP- buttons set the hour and press the SET button to set the minutes. Press the SET button for confirmation.
CODES
Read User Manual Online (PDF format)
Loading......