FFPOWER P2001 Solar Generator User Manual

FFPOWER P2001 Solar Generator

Packing list

• Portable power station

  ---

• AC Charger
  

• Manual

• XT90 to MC4 cable

• Car charge to XT90 cable

Attention

Please read the manual very carefully before you use the product!

a. Pay special attention when using the product near children.
b. Using accessories recommended or sold by non-professional product manufacturers may have the risk of electric shock.
c. When not using the product, please turn off the power.
d. DO NOT disassemble the product, it may cause unpredictable fire, electric shock, etc.
e. DO NOT use a broken plug or wire with this product, it may cause unpredictable risks.
f. When using the product, please ensure that the air intake/outlet is unblocked.
g. Please place the product in a ventilated and dry environment, avoid rain, humidity and other wet environments.
h. DO NOT use this product in a high temperature environment.
I. Please charge the product every three months.

Specifications

Capacity

|

Cycle life

|

Weight

|

Size

|

XT60*1

---|---|---|---|---

51.2LViF(2e0P0o04Wh)

|

≥3500

|

22KG

|

394279330mm

|

12V/10A

USB-A*2

|

USB-A*2

|

USB-C *2

|

Output*2

|

Cigar Lighter*1

5V/2.4A

|

QC3.0-18W

|

PD-100W

|

12V/3A

|

12V/10A

AC Output*6

|

AC Input

|

XT90 Input

|

LED Light

|

AC5100/600- H2z0V

|

1001-1200VW15A

|

12-54080V Max 15A

|

2W

Product introduction

This product is a portable power station, suitable for home emergency power backup, outdoor travel, emergency disaster, field work and other applications.

The product has a built-in lithium iron phosphate battery, which supports AC fast charging, car charging, solar photovoltaic panel charging(the product has UPS function, when the power fails, it can switch to supply power to the electrical appliance within 10ms).

The AC output is pure sine wave and can manually switch between 50Hz and 60Hz,Which will provide better protection of electrical appliances.

1. Main power control

2. Light control

3. USB control

4. DC control

5. LCD display

6. Air intake/outlet

7. AC on/off control(50Hz/60Hz switching control)

8. XT90 input port

9. AC input port

10. Overload protector

11. Main Power Control
    Main Control for the whole system turn on/off Operate method: long press the button for 3s to turn on/off the system.

12. Light control
    Operate method :short press to turn on and change the light mode(SOS/Flash).
    Notice: you can turn off the light by long press the button(1-2s) in any mode.

13. USB control
    Operate method: short press to turn on/off.

USB-A*2

|

USB-A*2

|

TYPE-C*2

---|---|---

5V/2.4A

|

QC3.0-18W

|

PD-100W

4. DC control
   Operate method: short press to turn on/off.

Output*2

|

Cigar Lighter*1

|

XT60*1

---|---|---

12V/3A

|

12V/10A

|

12V/25A

5. LCD display
   Present the remaining power and using data.

6. Air intake/outlet
   When the fans are working, please don’t block the channel.

7. *AC control(AC output6, total share 2000W)
   Operate method :short press to turn on/off.
   Notice:**

8. Please confirm the output voltage or frequency before using

9. Long press the button for 2s to entry the frequency changing mode, 50Hz and 60Hz will blink in the display, press again the button to chose the right frequency, wait till the frequency is not blinking, then you will get the frequency you want.

10. Quick short press for 10 times to switch the voltage 100V or 110V.

11. XT90 input port
    XT90 port for charging by car charging or solar panel charging.

12. AC input port
    About two to get a full charge by 1100W main AC from the power grid.

13. Overload protector
    To protect this product, an overload protector is added. Prevent damage to the product due to excessive AC input current caused by lightning and power grid fluctuations. When such a situation occurs, the overload protector will start to cut off the AC input to protect the product Please restart the AC input function of this product by following.
    steps：
    ※When the overload protector is activated, it’s unable to charge the devices.

14. For safety reasons, turn the product OFF and unplug all ports.

15. After confirming that there is no abnormality in each part, turn on the product.

16. Press the overload protection button to restart AC input.

Display icon introduction

1. Charging/using time
2. Fan state
3. High/low temperature protection
4. Power percentage
5. Total input power
6. Total output power
7. LED light
8. AC output
9. Type-c output
10. USB output
11. AC charging
12. XT90 charging
13. DC output
14. Cigar lighter output
15. XT-60 output

icon blinking

| The icon corresponds to the port short-circuit and overload protection| Remove the load and press the key to return to normal
|

icon blinking

| Power Grid abnormal| Check whether there is an abnormality in the power grid
|

icon blinking

| Input voltage is too high| Check whether the input voltage is too high
|

icon light up

| When H light up, the temperature is high, and when L light up, the temperature is low. The device may start the smart protection program and stop working| Need to wait for the machine to return to the normal temperature range to continue working
|

icon light up

| On behalf of the temperature rise, the machine starts to dissipate heat normally|

Recharge method

By AC mains

By solar panels

*Please make sure the input voltage between 12-48V. When the voltage over 48V, the over-voltage protection will work and stop charging.

*Free after-sales service will not be guaranteed, if you use the wrong solar panels or in a wrong way.

Connecting Pattern ①

The area of charging

Connecting Pattern ②

The area of charging

By Car charger

UPS introduction

The user can connect the AC charging cable to the power grid, and then connect the electrical appliances to the AC outlet of the device and turn the AC output on (as shown in the figure below).

Attention

1. The UPS ONLY support appliances under 1100W.
2. Before power cut, the power supply will directly come from the power grid.
3. When power cut, the device will switch the power supply from power grid to the battery inside automatic in 10ms,and keep your appliances working.

FAQ

1. The appliances power is within the rated output power range of the product but it cannot be used?
   The power of the product is low and needs to be recharged. When some electrical appliances are started, the peak power is higher than the product power, or the nominal power of the electrical appliance is greater than the product power;

2. Why is there a sound when using it?

3. Is it normal the charging cable heat up during use?
   he sound comes from the fan or the relay when you start or using the product.
   Yes, it is. The cable complies with national safety standards and has applied the certificates.

4. What kind of battery we use in this product? The battery type is lithium iron phosphate.

5. What devices the product can support by the AC output?
   The AC output is rated 2000W. It’s available to power most of the home appliances, which rated power is lower than 2000w. Please make sure the total loading by AC is under 2000W before using.

6. How can we know the remain using time?
   Please check the data on the screen, it will show the remain using time when you turn on.

7. How can we confirm the product is recharging?
   When the product is under charging, the product screen will show the input wattage, and the power percentage indicator will blink.

8. How should we clean the product？
   Please use a dry, soft, clean cloth or tissue to wipe the product.

9. How to storage?
   Please turn off the product and place it in a dry environment. Do not place this product near water. For long-term storage, we recommend to use the product every three months(Run out the remain power first and recharge it to the percentage you want, such as 50%).

10. Can we take this product on airplane?
    NO, you can’t.

11. Is the actual output capacity of the product the same as the
    target capacity in the user manual?
    The capacity of the user manual is the rated capacity of the battery pack of this product. Because this product has a certain efficiency loss during the charging and discharging process, the actual output capacity of the product is lower than the capacity specified in the user manual.

Maintenance

1. It is recommended to use or store this product in an environment of 20°C to 30°C, away from water, heat, and other metal objects.
2. For safety reasons, please do not store this product in an environment higher than 45°C or lower than -10°C for a long time.
3. If it is not used for a long time, please charge it to 60% before storing. If the battery is left unused for a long time when the battery is seriously insufficient, it will cause irreversible damage to the battery and shorten the cycle life of the product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>